Presentation on theme: "Quick Operation Guide System Controller WV-CU650 Main Functions (1) WV-CU650 Start Up Login 1. Turn on the power and wait for the Login standby display."— Presentation transcript:
Quick Operation Guide System Controller WV-CU650 Main Functions (1) WV-CU650 Start Up Login 1. Turn on the power and wait for the Login standby display. 2. Press the CAM(SET) button, then enter the User ID by using the numeric buttons and press the CAM(SET) button. Default Setting User ID: 650 Password: Enter the password by using the numeric buttons and press the CAM(SET) button. Display * After more than 5 seconds with no operation, display returns to Login standby. CAM(SET) Recording/Playback/Search Login ID input Camera and Monitor Select HD300 recording or playback operation from CU650 is possible only when selecting “ Monitor 2 output ” of HD300. ideas for life Camera Setting and Operation Move cursor Display
3. Following filtering option can be selected by pressing the CAM(SET) button after STEP 2 mentioned above. 2. Select a searching filter by moving the joystick to the left or right. Filtering by time and date Move the cursor by joystick and rotate jog dial to enter time and date. Press CAM(SET) button to determine. Filtering by recording event Move the cursor to select the event and rotate jog dial to select ON. Press CAM(SET) button to determine. Filtering by text Rotate jog dial to select OFF, with TEXT or without TEXT. Press CAM(SET) button to determine. Filtering by camera channel Select camera channel numbers with joystick and apply filtering with jog dial. Press CAM(SET) button to determine. 1. Recorded Event List is displayed when pressing the SEARCH button twice. Recorded Event List display (2) WJ-HD300 Recording and Playback Search Event Records1 * Select the UNLOCK FILTER and press the CAM(SET) button to cancel the selected filter. 3. Move the cursor by moving the joystick up and down and rotate the jog dial to select a recorded event to be played. Press the PLAYBACK/SEARCH button to playback the recorded event. Fast Forward / Fast Reverse Playback2 Skip3 * If there is no next or previous recorded image, current playback will be continued. Rotate the Shuttle Ring during playback Rotating the Shuttle Ring clockwise: Fast Forward Rotated degree will change the speed. (1/2x, 1x, 2x, 5x, 10x, 20x, 50x) Rotating the Shuttle Ring counterclockwise: Fast Reverse Rotated degree will change the speed. (1/2x, 1x, 2x, 5x, 10x, 20x, 50x) Press the SHUTTLE HOLD button while holding the rotated shuttle ring to maintain a desired playback speed. To return to the normal playback speed, press the SET button. Rotating the Jog Dial clockwise: Skip to the next recorded image Rotating the Jog Dial counterclockwise: Skip to the previous recorded image Shuttle Ring Jog dial Joystick SEARCH CAM(SET) PLAY/PAUSE SHUTTLE HOLD Jog Dial * If wrong operation, press EXIT to return to normal screen. Rotate the Jog Dial during playback
(3) Select Camera and Monitor Select Monitor1 Select Camera2 1. Select the monitor number to be displayed by numeric buttons and press the MON(ESC) button to determine. * If an invalid monitor number is selected, it returns to the previously selected monitor. * If an invalid camera number is selected, “Invalid” appears on the display and the previously selected camera is displayed. 2. Select the camera number to be monitored by numeric buttons and press the CAM(SET) button to determine. Current Selected Monitor Current Selected Camera Numeric Key display and System Unit Number MON(ESC) CAM(SET) (4) Camera Operation 2 Pan / Tilt Operation1 2. Move the joystick to the desired direction for pan / tilt control. Zoom Operation1 Iris Adjustment2 Focus Adjustment Valid only for the Panasonic unitized camera such as WV-NS324/CS564/CS854B/CW864A etc. 1. Enter the camera number to be operated by pressing the numeric buttons and press the CAM(SET) button. 2. Move the zoom wheel to the desired position for telephoto image and wide image. 2. The Iris can be adjusted by pressing the Iris Open or Iris Close button. * To reset the Iris press the “A” button (5) Camera Adjustment Joystick CAM(SET) Joystick Iris Button “A” Button Top Button Focus Button “B” Button Zoom wheel Numeric Keys CAM(SET) Numeric Keys CAM(SET) Numeric Keys CAM(SET) Numeric Keys 1. Enter the camera number to be operated by pressing the numeric buttons and press the CAM(SET) button. Numeric Keys 1. Enter the camera number to be operated by pressing the numeric buttons and press the CAM(SET) button. 2. Auto Focus can be set by pressing the “B” or “Top” button. * Manual focus adjustment is also possible by pressing the Focus Far or Focus Near buttons.
Other Functions Multi Screen Display1 Electronic Zoom2 1. It is possible to display images in multi-screen format by pressing the MULTI SCREEN buttons. (4, 7, 9, 10, 13 and 16 screen for HD316, 4, 7 and 9 for HD309) * If single screen needs to be displayed, enter desired camera number by numeric keys and press CAM(SET) button. 2. Pressing EL-ZOOM button displays 2 times or 4 times zooming image. * Displayed image position can be changed during electronic zoom by operating the joystick. Note: The picture quality of the enlarged image by electronic zoom will be lower than the standard image quality. Project Big Bang, SSD GSG Version 1.0 MULTI SCREEN 1. Select desired camera and monitor to operate. Joystick EL-ZOOM Message in LCD Display Invalid When entering a wrong User ID or Password When entering invalid numbers Note: “Invalid” will disappear after a few seconds. Prohibited When operating functions restricted by user management settings. Unit Error When selected unit is not connected properly Note: Make sure all connection on the rear panel of WJ-HD300 series. Controller No.1 No Exist Error When Unit Address 1 is not created Set Rotary Switch to position 1 and create Unit Address 1 Note: “Prohibited” will disappear after a few seconds.