We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byJaylin Peavy
Modified over 2 years ago
Evolution of the OTS Bail Kit By Terry A. Pansiera, Global Marketing Director, OTS Corporation, Weaverville, NC
Old Original Series Handle Both StepLock and Interlock Barrel style handle
New Original Series Handle Both StepLock and InterLock Flat handle with holes for attachment
2400/2755 Series Handle Both StepLock and renamed UniLock Still retain barrel type handle UniLock accepts bail StepLock does not allow bail
1) Slip “O” rings On to screws 2) Insert assembly through handle 3) Turn screws until tight Note: Bail should be able to move slightly on the handle
Rod Type StepLock Bail Attachment Pins
Current Bail Kits SBK/IBK –Fits Original StepLock –Fits Original InterLock –Retail $39.95 RBK –Fits Original StepLock –Fits Original InterLock –Retail $24.95 UBK and UBK-S –Fits 2400/2755 UniLock –Retail $15.25
860 (LF), 880 ½”- 2” 860 (LF), 880 ½”- 2”. Modification Overview Production of the ½ - 2” 860 series began in 1997 and is current. The 880 is an “N”
Instructions for making plunger fork tool. Drawing for the trigger assembly.
860 21/2”-10”. Modification Overview Production of the 2½” – 10 sizes began in Lead free version (LF860) was introduced in Parts do not.
Clearing Procedures. DISASSEMBLY Major Groups Barrel Group Turn the cover latch and raise the cover group Grasp the retracting slide handle with the.
KSE-Lights (UK) Ltd Hall Farm Sywell Aerodrome Sywell Northampton NN6 0BN Tel: Fax:
825, 825Y, 825YD 21/2”-10”. Modification Overview 825- ( ) Cast iron body- Threaded in seats- Internal check parts are epoxy coated iron. Old.
Servicing Welch DRYFAST ULTRA Pump Models 2032
M300, M300N, M300Z (2½ ”–10”) M300A (2½ ”- 4”). Modification Overview Production began in 2000 under the Hunter name. In 2002 it was produced as the.
©Task Force Tips, Inc 2004 Task Force Tips Handline Upgrade Program Upgrade Brings Any Old Style Nozzle Up to Current NFPA Compliance Upgrade Adds a New.
GLOBAL LIFT CORP COMMERCIAL SERIES PORTABLE KIT Portable Kit -
957RPDA, 957N RPDA, 957Z RPDA 21/2”-10”. Modification Overview Production began in 2002 and is current. Early versions used a ¾” Flomatic RPZE for.
Experts in Chem-Feed and Water Treatment Old style ORP and pH sensors. The exposed red sensor is an ORP sensor. This connecter predates the connector to.
Sentek Technologies Joining EnviroSCAN Probes. Probe Components 20-way probe cable connector (special order) Cable spacer (Part No 80015) Probe rods Probe.
American Electrical, Inc. Junction Box / Hookup Box Fast and easy way to make electrical connections An assembled kit – no need to procure and assemble.
Step 12 Here is the issue…..the mount for the throttle arm is pushed up against the side of the housing. The problem with this is it allows (due to alignment)
Assembling the CheapBot Line Follower In 8 easy steps.
MECHANICAL ASSEMBLY EBB440 Applied Metallurgy Prepared by : AAS.
MECHANICAL ASSEMBLY ©2002 John Wiley & Sons, Inc. M. P. Groover, “Fundamentals of Modern Manufacturing 2/e”
CricketSat Receiver Assembly Instructions This is the instruction slides for the assembly of a receiver board. It would be a good idea to review soldering.
400A & 600A Heavy Duty Safety Switch NEMA 4X, NEMA 12 Replacement Instructions for Vault Handle and Linkage Assembly.
Frame Assembly Produced by Ed Latimer, Team 476 Ken York, Team 476 Ron Markum, Team
Clarinet Assembly Best assembly to prevent unnecessary repairs.
Instructions for Diaphragm Replacement Cat. Nos. 2052B-01, 2054B-01
Traditional Fixtures & Fittings 1 J. Byrne Fixtures & Fittings J. Byrne
CricketSat LP (Transmitter) Assembly Instructions This is the instruction slides for the assembly of a transmitter board. This is the board that will fly.
Fasteners and Thread Repair
The PL-259 Connector Amphenol Nickel Plated Body Silver Plated Pin
Bezel Pendant. Choose your supplies Cabochon—a smooth round stone or glass piece with a flat back) Bezel wire—goes around the cabochon and forms the walls.
Recone Steps for 9900 Series. Tear Down 1 Cut through surround and spiders, remove cone assembly.
1. Start with Kit of Parts Original kit of parts New carbon fiber (CF) parts Flexure elements Links Steel triangles Steel faceplate Polyester flexure 2.
Pump fabrication – day 1 living with the lab group B will make their pumpgroup A will draw their pump.
STOVES. 2 SIZES OF STOVE STOVE COMPONENTS WINDSHIELD BASE HANDLE SAUCEPANS FRYING PAN PACKING STRAP.
Students: DINESH JOSHI RAJNISH VERMA RAMDEEN BISHNOI HITENDRA SINGH JOGENDRA SINGH (IIIrd YEAR) SUBMITTED TO:- Er. AKASH RANA(HOD) PETROLEUM.
Title: Corvette C5 Column Lock Bypass Originator: John Neese Date: 30 Jan 2005 Revision: Sheet: 1 of 6 Column Lock Bypass.
T HE PDM INTEGRATION P. Barrillon (LAL) & G. Prévôt (APC) On behalf of the PDM crew (Simon, Lech, Philippe, Sylvie B) EUSO-SPB/MiniEUSO progress meeting,
Assembly Manual Mike Fortney 04/02/2006 CricketSat Receiver.
975, 975XL ¾”-2” 975, 975XL ¾”-2”. Modification Overview Production of the original 975 began in This version had buna-n check discs and did not.
ASSIGNMENT D13 ASSEMBLY MODELING. DO 1 Create the four part D13 Base Parts (Ask me for the sheets) Collar Base-Plate Cap-Screw Bearing Save each part.
Grapple Housing Top Sub Grapple Collet Seal Housing Bottom Sub Seal Housing Metal Seal Ring.
1 Introduction to Engineering Lab 2 – 1 Assembling the Conveyor/Sorter Agenda Goal of todays lab. Storing your teams conveyor/sorter. Tool kits. Safety.
Notes on Converting 3 Rail Locomotives to 2 Rail Operation By Joe Foehrkolb Baldwin Forge & Machine Baldwin, Maryland.
Lesson Working with Copper Tubing. Interest Approach n Why is copper tubing only used for water and fuel lines?
Option #A: Demonstration Package …$ pairs of urban poles (40 % off) - 2 series 300 (fitness) - 1 4LIFE (pink-5% to breast cancer) - 1 series 700.
Assembly Manual Mike Fortney 04/09/2004 CricketSat Receiver.
994 2½ ”- 10”. Modification Overview Production for the 994 began in 1999 and is current.
General Instructions for “KidWind Light” wind tunnel.
Lesson 17 Working with Copper Tubing. Next Generation Science/Common Core Standards Addressed! n CCSS.ELA Literacy.RST.9 ‐ 10.3 Follow precisely a complex.
New Products 5204 Openable API Bottom Loading Adapter Integrated flow indicator Longer sight glass Teflon lip seal in stuffing box Ergonomic aluminum.
© 2017 SlidePlayer.com Inc. All rights reserved.