Presentation is loading. Please wait.

Presentation is loading. Please wait.

LESSON-9 DRAFTING OF TROUSER FRONT 0-1=LENGTH-- BELT WIDTH 1-2 =6 C.M 0-3= ¼ HIP+ 1.5 C.M 4=MIDDLE OF 3-1 4-5=5 C.M UP 3-6 =1/3 HIP -2 C.M 7=MIDDLE OF.

Similar presentations


Presentation on theme: "LESSON-9 DRAFTING OF TROUSER FRONT 0-1=LENGTH-- BELT WIDTH 1-2 =6 C.M 0-3= ¼ HIP+ 1.5 C.M 4=MIDDLE OF 3-1 4-5=5 C.M UP 3-6 =1/3 HIP -2 C.M 7=MIDDLE OF."— Presentation transcript:

1 LESSON-9 DRAFTING OF TROUSER FRONT 0-1=LENGTH-- BELT WIDTH 1-2 =6 C.M 0-3= ¼ HIP+ 1.5 C.M 4=MIDDLE OF =5 C.M UP 3-6 =1/3 HIP -2 C.M 7=MIDDLE OF = =3-7

2 LESSON-9 DRAFTING OF TROUSER 1-10= =5C.M IN 0-12= =1/16 HIP JOINT 14-6 ROUND SHAPE 12-13=1/4 WAIST + 2 C.M 9-15 =1/4 KNEE 9-16= 1/4 KNEE 10-17=1/4 BOTTOM JO INT 13,3,15 AND 17 JOINT 6,16,AND 18

3 BACK 6-A =1 C.M DOWN A-B= 1/18 HIP C=MIDDLE OF 12-8 C-D=1/24 HIP UP D JOINT TO 11 DRAWING HIP SHAP 13,A,F AND D D-E =1/4 WAIST +3.5 C.M F=MIDDLE OFD-11 3-G=5 C.M UP

4 BACK F-H =5 C.M UP 15-I =2 C.M 17-K=2 C.M JOINT E,H,I AND K 16-J=2 C.M JOINT B,J AND L 18-L=2 C.M JOINT B,J AND L

5 FRONT CROSS POCKET 13-A =5 C.M 13-B =1/6 HIP

6 BACK DART ON WAIST LINE DART 1=MIDDLE OF D-E JOINT =1 C.M 1-3 =1 C.M 1-4 =7 C.M BACK CUT POCKET 4-5 =1/16 HIP 4-6 =1/16 HIP

7 SIDE CROSS POCKET BEG POCKET BEG 0-1 =1/3 HIP 0-2 =1/6 HIP 1-3 =1/6 HIP +2.5 C.M 1-4 =4 C.M UP

8 ZIPPER FLY FLY 0-1=1/4 HIP 5 C.M 1-2 =2 C.M 1-3 =2 C.M 0-4 = 5 C.M

9 WAIST BELT RIGHT BELT 0-1=WAIST BELT WIDTH 6-7=WAIST BELT WIDTH 0-2= 5 C.M 1-3= 5 C.M 2-4=1/2 WAIST 3-5=1/2 WAIST 4-6= 5 C.M 5-7= 5 C.M

10 WAIST BELT LEFT BELT 0-1=WAIST BELT WIDTH 6-7=WAIST BELT WIDTH 0-2= 5 C.M 1-3= 5 C.M 2-4= ½ WAIST 3-5= ½ WAIST 4-6=15 C.M FOR LONG BELT 5-7=15 C.M FOR LONG BELT


Download ppt "LESSON-9 DRAFTING OF TROUSER FRONT 0-1=LENGTH-- BELT WIDTH 1-2 =6 C.M 0-3= ¼ HIP+ 1.5 C.M 4=MIDDLE OF 3-1 4-5=5 C.M UP 3-6 =1/3 HIP -2 C.M 7=MIDDLE OF."

Similar presentations


Ads by Google