Presentation on theme: "Disc Brake Conversion MOVES THE WORLD Trailer Industry The Trailer Industry Is Converting To Disc Brakes Just Like The Automotive Industry Did In The."— Presentation transcript:
Trailer Industry The Trailer Industry Is Converting To Disc Brakes Just Like The Automotive Industry Did In The 1960’s
Trailer Industry During the past 20 years, trailers have grown larger and heavier and tow vehicles are continually getting lighter. Despite the increasing demands of trailer braking systems, most trailers still utilize electric drum brakes, which have shown very little improvement since the 1950’s.
1.Choose Proper Line Kit a)Single, Tandem, Triple b)Torsion or Spring 2.Use Only DOT Approved 3.No Vertical Coils Install Brake Lines
BrakeRite Bench Test Important – Follow in This Order 1.Touch The White Wire To The Negative Port 2.Touch The Black Wire To The Positive Post Nothing Should Happen Yet 3.Add The Blue Wire To The Positive Post The BrakeRite Should Immediately Run If The BrakeRite Does Not Run, There Maybe a Problem With The System If It Does Run, Then A Wiring Problem Exists or An In Cab Control Problem Is the Issue
1.Pull Breakaway Switch and Bleed a)Start With Farthest from Actuator 2.Insert Breakaway Switch and Check Fluid Level 3.Repeat to Next Caliper Bleed and Check
Check EHB Manual For Compatible Controllers Ford / Chevy Integral System 2006.5 and Newer Controller Compatibility