We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byClifford Blacksmith
Modified over 2 years ago
1 Grapple skidder
3 http://www.unified-eng.com/scitech/weld/weld.html TYPES OF WELDS AND THEIR SYMBOLS Square groove V groove Bevel groove U groove J groove Flare v groove Flare bevel groove
4 FILLET WELD
5 http://www.unified-eng.com/scitech/weld/weld.html Fillet weld FILLET WELD
6 http://www.unified-eng.com/scitech/weld/weld.html SQUARE GROOVE WELD
7 http://www.unified-eng.com/scitech/weld/weld.html V groove V GROOVE WELD
8 http://www.unified-eng.com/scitech/weld/weld.html Bevel groove BEVEL GROOVE WELD
9 http://www.unified-eng.com/scitech/weld/weld.html U groove U GROOVE WELD
10 http://www.unified-eng.com/scitech/weld/weld.html J groove J GROOVE WELD
11 http://www.unified-eng.com/scitech/weld/weld.html Flare v groove FLARE V GROOVE WELD
12 http://www.unified-eng.com/scitech/weld/weld.html Flare bevel groove FLARE BEVEL GROOVE WELD
13 PLUG AND SLOTS WELDS
14 For same strength, longer leg size cost more. Use smaller lag size with longer length. DON’TDO
15 Use symmetric sections for automatic welding DON’TDO
16 Design simple to save welding cost DON’TDO
17 Use minimum amount of weld metal DON’TDO
18 Design for easy accessibility to welding
19 Arrange the welding layout which reduces welding cost
23 CC C BetterWorse Improved design
25 BetterWorse Improved design
26 BetterWorse Improved design
27 BetterWorse Improved design
36 Risk Priority Number RPN = R occurrence x R severity x R detection RPN = 1failure is highly unlikely and unimportant RPN = 30it is OK RPN = 100failure will occur RPN = 1000hazardous and harmful failure will occur FMEA OF WELDMENTS
44 01 bad 02 better03 better04 best joint01.sldasm
45 u plate and shaft.SLDASM
52 \weldments 03\window01.sldprt
53 \weldments 03\window02.sldprt
54 tube and lug.sldasm
55 tube 02.sldprt Configurations 03, 04
60 Terminology differs depending on standard
62 Plug weld which is called filet weld in SW
Welding Symbols (ISO 2553) and Weld Joint Design
Weld Joint Geometry and Welding Symbols
1 WELDED CONNECTIONSI. 2 Efficient and direct way of connecting is by welding Metallurgical bond by heat or pressure or both Advantages of welding Direct.
Engineering Drawing and Design Chapter 18 Welding Drawings
Understanding Welding Symbols Terms and Definitions
Risk analysis – FMEA Workshops. FMEA 1 Simple risk assessment process!! Identifying risk Simple method for grading risk Determines appropriate risk.
Welding Symbols and Nomenclature
Introduction to Welding. Principle Welding Methods Oxyfuel Gas Welding Arc Welding Resistance Welding : joining without melting There are several other.
Manufacturing Processes Lab I, MET 1321 Welding Symbol
Welding Symbols Ch. 38.
Manufacturing Processes Lab I Joint Design & Welding Terms
Welding Joint Design and Welding Symbols
Welding Representation Chapter Technical Drawing 13 th Edition Giesecke, Mitchell, Spencer, Hill Dygdon, Novak, Lockhart © 2009 Pearson Education,
1 Blueprint Reading for the Machine Trades, Sixth Edition Unit 16: Weldments Russ Schultz and Larry Smith PowerPoint presentation created by LaVonne Vichlach.
Welding terminology WIT Pg. 4-1 Instructor Should Explain:
Chapter 4 Welding Symbols
Types of Welds and Welded Joints.
Pathway:Engineering Graphics & Design Course:Survey of Engineering Graphics Unit 9:ENGR-SEG-9 Welding Design and Drawing.
AWS Fundamental Terms and Definitions
Welding Joints, Positions, and Symbols
BASIC WELDING SYMBOLS 05-AUG-2006.
Product Design and Development
Shielded Metal Arc Welding Joints and Passes
WELD JOINT GEOMETERY AND WELDING SYMBOLS. A Joint: A configuration of members A Weld: A union between materials caused by heat, and or pressure Terminology.
Welding Symbols Chapter 30.
Popcorn Sample PFMEA: Process Flow
IDM 355 F2009Dr. Joan Burtner - FMEASlide 1 An Introduction to Failure Modes and Effects Analysis (FMEA) Implementation at a Middle Georgia Manufacturing.
Arc Welding Techniques and Metal preparation
Tension Member Connections
Fillet Welds Unit 15. Fillet Welds Unit 15 Objectives Name the parts of a fillet weld. Determine weld size and weld length by interpreting the fillet.
ME 330 Manufacturing Processes WELDING PROCESSES (cont.)
CONNECTION DESIGN Connections must be designed at the strength limit state Average of the factored force effect at the connection and the force effect.
Topic 8: Welding terms and symbols
68402: Structural Design of Buildings II
Geometry Section 7.4 Special Right Triangles. 45°-45°-90° Triangle Formed by cutting a square in half. n n.
Welding Drawings Lecture 2.
Objective: SWBAT Identify and explain welding symbols.
T E C H N O L O G Y M.S.Rogers Copyright © 2004 WI Ltd A Joint: A configuration of members A Weld: A union between materials caused by heat, and or pressure.
Welding Design Department of Metallurgiy & Material
Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr.
DESIGN AND FABRICATION OF TURNING FIXTURE FOR ELBOW
The Good, The Bad & The Ugly Which of the following layouts would you choose?
Surface Finish An engineering component may be cast, forged, drawn, welded or stamped, etc. All the surfaces may not have functional requirements and need.
Joint fit up and alignment
© 2017 SlidePlayer.com Inc. All rights reserved.