Presentation is loading. Please wait.

Presentation is loading. Please wait.

Dynamic Data Acquisition 3D Measurements before, DURING, & after testing In both ambient or extreme climatic conditions.

Similar presentations


Presentation on theme: "Dynamic Data Acquisition 3D Measurements before, DURING, & after testing In both ambient or extreme climatic conditions."— Presentation transcript:

1

2 Dynamic Data Acquisition 3D Measurements before, DURING, & after testing In both ambient or extreme climatic conditions

3 DYNAMIC - Of or relating to physical force, energy, movement. Dynamic In Merriam-Webster.com Retrieved October 13, 2011, from DATA - Information output by a sensing device or organ that includes both useful and irrelevant or redundant information and must be processed to be meaningful. Data In Merriam-Webster.com Retrieved October 13, 2011, from DYNAMIC DATA ACQUISITION – The act of acquiring data DURING a products change of attributes. What is “Dynamic Data Acquisition”?

4  Privately held company specializing in the acquisition of dynamic point data  Strategic Alliance with Primetime Testing Laboratory, Inc.  Expert team in data acquisition (over 20 years)  Authorized service provider of AICON 3D Measurement productts Who Is DIS?

5 Where Are We? Centrally located 30 minutes east of Detroit Macomb Industrial Drive Clinton Township, Michigan 48036

6 What does DIS offer?  3D Measurement Service for engineering and manufacturing industries  Dynamically Measure components during extreme climate conditions  Dramatically Improve testing efficiency  Reduce development time and cost

7 Today’s Traditional Environmental Testing Process  Coordinate measurement machine (CMM)  First measure the part using a CMM  Run it through an environmental profile  Measure the part after a CMM  Compare Before and After point data

8 What The Traditional Method Misses?  Unable to identify part change during an environmental test  Falls short to pinpoint root cause when a part fails  Breakage during test  Part deformation at extreme temp  Do not know time, temperature, or humidity at each measurement  The traditional method is costly and time consuming  Labor Intensive  Inhibits development timing of bringing product to market

9 What is the DIS Process? ChamberCam™

10

11

12 What Does ChamberCam™ Provide?  Measures part deformation during an environmental test  Obtain 3D point data and analysis  Records Time, Temp, and Humidity each measurement  Measurements up to 15 times per second  Accuracy of 50 microns

13 How ChamberCam™ Will Help You  Improve discovery time of root cause analysis  ChamberCam™ provides previously unobtainable data  Time, temperature, humidity, and 3D point data  Captures dimensional data at hundreds of points  Image for every measurement taken  Easy to analyze and create / present data

14 Application Areas  Instrument Panels  Door panels  Headliners  Seats  Center Consoles  Armrests  Visors  Exterior  Engine and Performance

15 Application Areas: ChamberCam™  Instrument Panels  Door panels  Headliners  Seats  Center Consoles  Armrests  Visors  Exterior  Engine and Performance

16

17 Application Areas: MoveInspect  Instrument Panels  Door panels  Headliners  Seats  Center Consoles  Armrests  Visors  Exterior  Engine and Performance

18

19  Instrument Panels  Door panels  Headliners  Seats  Center Consoles  Armrests  Visors  Exterior  Engine and Performance Application Areas: MoveInspect

20

21 VIDEO SAMPLES

22

23 What You Get From Testing  3D Image overview of measured point data  Image for every measurement taken  3D deformation table of measured point trajectories  Information pins or graphs for selected measured points  3D data available to input into CAD  Video of measurements and their deformations  Free viewer to analyze data

24 What will the DIS process do?  Redefine Industry Process & Standard  No need for traditional CMM services for pre/post measurements  Dramatically improve the time to make engineering/design evaluations and decisions  Acquire measurable point data while part is static or moving  Change Test Specifications and Procedures

25


Download ppt "Dynamic Data Acquisition 3D Measurements before, DURING, & after testing In both ambient or extreme climatic conditions."

Similar presentations


Ads by Google