Presentation on theme: "THE GROUND HUG. The Ground HUG allows a Guardrail system to be installed onto metal or conventionally constructed buildings on landings or roofs with,"— Presentation transcript:
THE GROUND HUG
The Ground HUG allows a Guardrail system to be installed onto metal or conventionally constructed buildings on landings or roofs with, or without, an overhang. The Ground HUG quickly allows Guardrail post to be installed on virtually any structure in minutes. The Ground HUG GH1002 Kit includes 2 each 72” extensions (E72), 1 each 42” post (ST42), 1 each wall arm bracket (WAB1001) 1 each ground mounted bracket (GMB1001), the kit works on heights from 2’ 4”to 14’4”. The Ground HUG can be extended to accommodate two story structures by adding extensions.
T The Edge Mounted Bracket
The roof or deck edge attachment is the (EMB1001) edge mounted bracket. (EMB1001) can be screw mounted over existing roofing, and tear off can begin right up to the bracket. Simply unscrew and reattach to sheathing where it can be roofed over and remain for future use, simply cut off, or unscrewed and reused. On new construction simply attach to sheathing, and roof over it where it can remain for future use. The edge mounted bracket is bent offset so you can slide drip edge metal underneath. The edge mounted bracket is available in galvanized metal or stainless steel. The Ground HUG stands alone in fall prevention.
The Ground Mounted Bracket (GMB1001) is a bracket which can be driven into terra firma. The (GMB1001) is convertible from ground stake to deck, slab or wall mount.
The wall arm bracket (WAB1001), providing extra safety on units taller than one story, rests against, or may be anchored to the wall. The wall arm bracket (WAB1001) is adjustable for different size overhangs. The wall arm bracket can be padded to prevent any damage to the structure.
Hugs One LLC Toll Free: Cell: Fax: Joe Martinez Vice President, Operations