1. Cessna Winch Drive Motor Winch Power Cord Tow Rope Remote Control Cord

2. Instructions When taxiing back from a flight, turn the aircraft west to align with the yellow tow stripe Move the drive pulley to the right to set the winch to the Unwind position (if not already in that position) Pull the rope out and attach to the aircraft tail tie down ring Go back in the hanger and move the drive pulley to the left to change the winch to the Tow Position. Take the remote control out to the plane Push down on the remote control button to tow the plane back into the hanger (it may take some time for the plane to start moving until all the rope slack in the winch is taken up) Use the tow bar to steer the plane into the hanger Chock the main wheel tire(s) Move the drive pulley to the right to adjust the winch to the unwind position to get slack in the rope and then remove the tow hook from the aircraft tie down ring

3. Rope Unwind Position Drive Pulley In right most position Drive Pulley In right most position Drive Pulley in idle (right most position) Drive Pulley in idle (right most position) Lock Lever in 2 nd Groove If rope doesn’t unwind, this lever may need to be moved to unlock winch

4. Aircraft Tow Position Drive Pulley In left most position Drive Pulley In left most position Lock Lever In 3 rd groove (lift to move drive shaft to tow or unwind position Lock Lever In 3 rd groove (lift to move drive shaft to tow or unwind position Mesh Lever (Helps mesh gears when moving drive pulley from unwind to tow position Mesh Lever (Helps mesh gears when moving drive pulley from unwind to tow position Drive Gear