Presentation is loading. Please wait.

Presentation is loading. Please wait.

Goodson Tools and Supplies for Engine Builders Keeper-Eeze Tools.

Similar presentations


Presentation on theme: "Goodson Tools and Supplies for Engine Builders Keeper-Eeze Tools."— Presentation transcript:

1 Goodson Tools and Supplies for Engine Builders Keeper-Eeze Tools

2 Toll Free: Phone: : Web site: Keeper- Eeze Tools KE-6802 KE-6901 KE-6903 KE-6940 KE-6902 KE-6804

3 Toll Free: Phone: : Web site: Keeper-Eeze Demonstrated on Honda CRF-250R

4 Toll Free: Phone: : Web site: Valve Support Selection: A Shot-Bag or Chamber Plug must be used to hold up the valves while removing the valve locks. The Shot-Bags will conform to the combustion chamber. They should not protrude too far from the deck surface when installed. Choose from the different size bags for the correct fit. Multiple bags can be used for large chambers.

5 Toll Free: Phone: : Web site: Sleeve Selection Determine the correct protective guide Sleeve. Pick the Sleeve that fits closest to the bucket bore dia. And the spring/ retainer assembly. Some engines require the valve spring clearance relief to be used as a guide. ID always fits tool

6 Toll Free: Phone: : Web site: Installing Sleeve Fits in around spring & retainer Install the correct size sleeve over the spring & retainer assembly. The sleeve will maintain the proper fit for removal and assembly of the spring & retainer.

7 Toll Free: Phone: : Web site: This shows the proper sleeve installed around the spring and retainer.

8 Toll Free: Phone: : Web site: T-Handle Assembly Hold the T-handle portion of the Keeper- Eeze tool with the tube down between the fingers. Remove any Loader Modules from the tool by gently pulling on the plunger at the end to overcome the magnetic force. Retract the Adjuster by loosening the knob on the side and pulling it back.

9 Toll Free: Phone: : Web site: Insert the Remover attachment (Order No. KE-6803) into the end of the Keeper-Eeze tool. Push it in with a twisting action until it is fully seated.

10 Toll Free: Phone: : Web site: Push tool down Insert “T” Handle in sleeve installed in step 3. Hold tool down with one hand and firmly strike the T-Handle with palm of the opposite hand. This will release keepers. (Do not strike Keeper-Eeze with a hammer)

11 Toll Free: Phone: : Web site: Lock and retainer held by remover Pull the tool away from the cylinder head. The valve locks and retainer will be held safe by the Remover. Store the components for later assembly.

12 Toll Free: Phone: : Web site: Remove valve lock & Retainer off of the magnet with your hand Remove Spring

13 Toll Free: Phone: : Web site: Remove valve

14 Toll Free: Phone: : Web site: To Reassemble Install valve spring Install retainer on top of valve spring

15 Toll Free: Phone: : Web site: Spring Assembly in place Install Sleeve

16 Toll Free: Phone: : Web site: Insert the installation attachment into the T-handle Now the installation attachment is ready to have the correct keeper loader installed into the end of the installation attachment

17 Toll Free: Phone: : Web site: Assembly Insert the correct size loader module with the correct loader that matches the valve stem diameter until it seats up against the magnet

18 Toll Free: Phone: : Web site: Fully Assembled Loosen adjustment knob on side of T- handle. Then adjust loader module pin to approximately the same depth the keepers are located down on the valve stem.

19 Toll Free: Phone: : Web site: Place the valve locks (keepers) on the Loader Plunger Keepers are in position to be installed in the retainer and valve stem

20 Toll Free: Phone: : Web site: Now insert into the top of the sleeve and push into the retainer Same as removal, push down on T-handle Until an audible “click” is heard and felt in the handle and snaps in place and then remove T-handle

21 Toll Free: Phone: : Web site: Remove outer sleeve and you have a finished product

22 Toll Free: Phone: : Web site: Keeper- Eeze Tools KE-6802 KE-6901 KE-6903 KE-6940 KE-6902 KE-6804

23 Goodson Tools and Supplies for Engine Builders Keeper-Eeze Tools Any questions on the Keeper- Eeze please contact us Toll Free: Phone: Website:


Download ppt "Goodson Tools and Supplies for Engine Builders Keeper-Eeze Tools."

Similar presentations


Ads by Google