Presentation is loading. Please wait.

Presentation is loading. Please wait.

9000 Series Digital Matrix Mixer/Amplifiers. Outline Overview Hardware Modules Remote Control Operation Modes Applications Q&A.

Similar presentations


Presentation on theme: "9000 Series Digital Matrix Mixer/Amplifiers. Outline Overview Hardware Modules Remote Control Operation Modes Applications Q&A."— Presentation transcript:

1 9000 Series Digital Matrix Mixer/Amplifiers

2 Outline Overview Hardware Modules Remote Control Operation Modes Applications Q&A

3 Overview

4 Industry FIRST! All-in-one: Matrix mixer Digital signal processor 70V Amplifiers Three models: A-9060DH (2x60W) A-9120DH (2x120W) M-9000 (mixer)

5 Digital Matrix Mixer/Amplifiers A-9060DH & A-9120DH Up to 8 Mic/Line Inputs Up to 6 Line Outputs 8x8 Matrix Dual Channel Digital Signal Processor Dual 70V Amplifiers: A-9060DH: 60W x 2 A-9120DH: 120W x 2

6 Digital Matrix Mixer M-9000 Up to 8 Mic/Line Inputs 8x8 Matrix Dual Channel Digital Signal Processor 2 Balanced Line Outputs Add up to 6 Additional Line Outputs

7 Key Features Modular Design Superior Audio Quality 24-bit A/D and D/A, 48 kHz sampling Ultra-Low Distortion – % Versatile Operation Includes two operation modes to suit both zone paging matrix and conventional mixing applications Telephone Zone Paging DTMF dial access up to eight zones

8 Key Features Multi-function Display Allows programming and operation without a PC Flexible Remote Control Two remote volume control ports, assignable to any input or output; programmable trigger inputs and outputs (four each, expandable to twelve); and an RS-232 serial port Rack Kit Included (2RU) Five Year Warranty

9 Digital Signal Processing Dual Channel Digital Signal Processor (DSP): Auto-mixing (Mixer mode) 10-Band Parametric EQ High and Low Pass Filters Bass and Treble TOA Speaker EQ Presets Loudness Compressor Delay (Mixer mode) Additional DSP included on D-001T and T-001T modules

10 Front Panel Input select switches Input volume Input On/Off Output channel select Output On/Off Output volume

11 Front Panel Enter Parameter Esc/Back Memory Utility Navigation Power On/Off

12 A-9060DH & A-9120DH Rear Panel Dual 70.7V outputs RS-232 port Matrix/Mix Mode switch Control I/O Dual patching loops Dual remote volume controls

13 M-9000 Rear Panel RS-232 port Matrix/Mix Mode switch Control I/O Dual line outputs Dual remote volume controls

14 Block Diagram D-001T ZP-001T T-001T Dual Channel Digital Signal Processor 8x8 Matrix Dual 70V Amplifiers

15 Matrix Block Diagram

16 Built-in DSP - Block Diagram

17 Amplifiers - Block Diagram

18 9000 Series Modules

19 D-001T Dual Mic/Line Input Module with DSP Two Balanced Mic / Line Inputs Digital Signal Processing 10-Band Parametric EQ Bass / Treble Loudness High and Low Pass Filters Compressor Adjustable Sensitivity (-60 to -10 dBV) Phantom Power (24 VDC) Removable Terminal Block Maximum four per chassis Req’d for VOX (Voice-Operated Switch) function & input level metering

20 D-001T - Block Diagram

21 T-001T Dual Line Output Module with DSP Two Balanced Line Outputs Digital Signal Processing 10-Band Parametric EQ Bass / Treble Loudness High and Low Pass Filters Compressor Delay TOA Speaker EQ presets Removable Terminal Block Maximum three per chassis

22 T-001T - Block Diagram

23 ZP-001T Telephone Zone Paging Module Telephone Access Paging to up to eight zones Uses DTMF dialing to access amplifier and/or line outputs Dial up to eight output zones in one operation Analog extension or page port compatible Page port operation requires contact closure activation RJ-11 Telephone Jack and Removable Terminal Blocks Maximum one per chassis

24 ZP-001T Telephone Zone Paging Module Two Operation Modes: Ring (Analog extension port) Paging Port (DTMF and contact-closure required) Minimal programming required; simply dial to access individual or multiple outputs Requires busy tone from telephone system for disconnect If telephone system does not provide busy tone, dial “00#” to terminate the zone paging function Fixed 30 second paging time-out (automatic disconnect)

25 C-001T Input/Output Control Module Eight assignable control inputs for activating: Event Volume Up/Down (Input or Output) Mute (Input or Output) Power On/Off Emergency Mute Synch On/Off Eight assignable control outputs Removable Terminal Block Maximum one per chassis

26 Module Compatibility All existing 900 Series modules are compatible with new 9000 Series models A-9060DH, A-9120DH and M-9000 module ports New 9000 modules are not compatible with module ports in existing 900 Series, 700 Series or BG-M Series mixer/amplifiers 9000 input and output modules offer 2 channels in one module, more features, and are more cost-effective than separate 900 modules

27 Input and Output Metering Input metering requires D-001T input modules Output metering is provided for the two built- in output channels and included with each T- 001T output module 900 Series input and output modules do not include input or output metering

28 Module Capacity 1 8

29 D-001T and T-001T Module Installation D-001T Input modules must be installed in module slots #1-4 T-001T Output modules must be installed in module slots #5-7

30 ZP-001T Module Installation ZP-001T Zone Paging module must be installed after any D-001T input modules in the next available slots #1-4 If no D-001T input modules are used, install the ZP-001T module in slot #1

31 900 Series Module Installation 900 Series modules may be installed in any available slot not occupied by 9000 Series modules

32 C-001T Module Installation The C-001T Control I/O Expansion module may be installed in any available slot not occupied by other 9000 Series modules.

33 Module Configuration Examples

34 Remote Control

35 Remote Control Options Built-in: Two Remote Volume Control Terminals Four Control Inputs Four Control Outputs C-001T Control I/O Module RS-232

36 Rear Panel Remote Control Two Remote Volume Control Terminals, assignable to any input or output (10k ohm linear potentiometer or 0-10 VDC) Four Control Inputs, assignable to activate: Event Volume Up/Down (Input or Output) Mute (Input or Output) Power On/Off Emergency Mute Synch On/Off Four Control Outputs (open collector) for activating external relays

37 Rear Panel Remote Control Remote Volume Control (2) (10k ohm pot. or 0-10VDC) Control Inputs (4) (switch closure, dry contact) Control Outputs (4) (open collector)

38 C-001T Input/Output Control Module Eight assignable control inputs for activating: Event Volume Up/Down (Input or Output) Mute (Input or Output) Power On/Off Emergency Mute Synch On/Off Eight assignable control outputs Removable Terminal Block Maximum one per chassis

39 C-001T Module Remote Control Control Inputs (8) (switch closure, dry contact) Control Outputs (8) (open collector)

40 Remote Control Protocol AMX and Crestron modules available soon! Protocol document available on web Controllable parameters Fader gain Cross-point gain (Mixer mode) Preset recall

41 Software

42 CD-ROM with software included with each model Functions: Firmware Update Download and Save Settings from unit to PC Upload Settings from PC to unit Monitor Operation Status Activate Control I/O

43 PC Connection

44 Communication Modes Firmware Update Power on pressing channel #8 and Esc/Back keys simultaneously and press power button to turn ON Download/Upload Settings Power on pressing channel #8 and Enter keys simultaneously and press power button to turn ON

45 Matrix and Mixer Modes

46 Operation Modes Matrix Mode 1 input to up to 8 outputs Paging matrix applications Simultaneous “Event” (memory) activation Mixer Mode Up to eight inputs to up to eight outputs Mixing applications Single “Scene” (memory) activation

47 Operation Mode Switch

48 Changing Modes Power cable must be removed before changing operation modes When power is reapplied, all previously stored settings are lost Save settings before changing modes

49 Matrix Mode Zone Paging Matrix Allows multiple simultaneous Event activation for paging and BGM distribution Eight Level Ducker Assignable priority levels and mute depth attenuates all other lower priority input signals Voice Operated (VOX) Event Activation 32 Programmable Events Activate via front panel, control input, or RS-232 Multiple Events can be active simultaneously

50 Mixer Mode Auto-mixing Automatically adjusts the open microphone's output channel gain depending on the number of open microphones (NOM) Two Level Ducker Assignable priority levels and mute depth attenuates all other lower priority input signals Voice Operated (VOX) Paging 32 Programmable Scenes Activate via front panel, control input, or RS-232 Only one Scene can be active at a time

51 Mode Comparison FEATUREMATRIXMIXER Memories32 Events32 Scenes Memory Activation SimultaneousSingle Routing per Memory One input to up to eight outputs Up to eight inputs to up to eight outputs Ducker8 Level2 Level Othern/aAuto-mixing (gating), Cross-point Gain, Delay

52 VOX Function The VOX function activates the set Event (Matrix mode) or Page (Mixer mode) when an audio signal at the assigned input If the audio signal drops below a preset level after the VOX function begins operation, the set Event or Page is terminated after approximately 5 seconds

53 Ducker Function The Ducker function automatically attenuates input signals with lower priority when two or more audio signals are simultaneously received Matrix mode: 8-Level Ducker Mixer mode: 2-Level

54 Matrix Mode

55 Matrix Mode - Menus INPUT OUTPUT EVENT UITILITY ADJUST KEYLOCK

56 Matrix Mode - INPUT Menu Input Channel Name D-001T Specific: Input Sensitivity Phantom Power VOX ZP-001T Specific Pre-Page Tone Mode Priority Ducker

57 Matrix Mode - OUTPUT Menu Output Channel Name

58 Matrix Mode – EVENT Menu Route Input Outputs Trigger (Control-In, VOX, None) Synch Interlock Base Route Event (4) Trigger (Control-In, None) BGM End Trigger (Control-In) None

59 Route Event Sets the routing path one input to one or more outputs Activated by Trigger "None" (BGM) "VOX" (D-001T only) "Control Input" (1 – 12) Priority level 8 is considered to be Background Music

60 BGM End Event Defines the method of stopping BGM broadcasts Only "Control Input" (1 – 12) can be selected for Trigger All current BGM broadcasts are stopped

61 Base Event Combination of up to four “Route” type events, each routing an input set to priority level #8 Allows multiple BGM (Route) Events to be simultaneously activated with a single activation signal For Trigger, select "None" or "Control Input" (1 - 12)

62 Event Example The following example includes two BGM sources, each routed to a separate amplifier zone and a Paging source routed to both amplifier zones When the Page occurs, both BGM sources will mute

63 Event Example Event 1: Type: ROUTE Input 1 (BGM #1) set to Priority #8 Input 1 routed to Output 1 Trigger set to NONE Event 2: Type: ROUTE Input 2 (BGM #2) set to Priority #8 Input 2 routed to Output 2 Trigger set to NONE

64 Event Example Event 3: Type: ROUTE Input 3 (Page) set to Priority #1 Input 3 routed to Outputs 1 and 2 Trigger set to VOX Event 4: Type: BASE Events 1 and 2: ON Trigger set to NONE

65 Event Example Event 3 (Base Event): a group of up to 4 ROUTE Events, each with a Priority 8 input channel Event 1 (BGM ROUTE Event): Type: ROUTE Input 1 (BGM #1) set to Priority #8 Event 2: (BGM ROUTE Event) Type: ROUTE Input 2 (BGM #2) set to Priority #8

66 Matrix Mode - UTILITY Menu Control Inputs Volume Up/Down Mute Power Emergency Mute Control Outputs Power Power Off Delete Save

67 Matrix Mode - UTILITY Menu RS232C Sets serial port baud rate Module Displays installed modules Priority Sets paging priority mode (FIFO, LIFO, MIX)

68 Matrix Mode – Priority Modes Multiple Input Priority Modes sets priority order when multiple inputs with the same priority level are broadcast First-In-First-Out (FIFO): input that occurs first is broadcast Last-In-First-Out (LIFO): the most recent input is broadcast MIX: all inputs are simultaneously mixed and broadcast

69 Matrix Mode - UTILITY Menu Remote Volume (2) Assignable to any input or output channel Event Sets the Event that activates at Power-On Version Displays firmware version Memory Initializes all current settings to default

70 Matrix Mode - ADJUST Menu Event (On/Off) Input Gain D-001T Bass/Treble Loudness EQ HPF/LPF Compressor VOX Sensitivity Ducker Depth

71 Matrix Mode - ADJUST Menu Output Gain Bass/Treble Loudness Speaker EQ Parametric EQ HPF/LPF Compressor

72 Matrix Mode – KEYLOCK Menu All Locks all keys simultaneously Input Locks the Input channel selection keys, Input volume control, and Input channel ON/OFF key Output Locks the Output channel selection key, Output volume control, and Output channel ON/OFF key Utility Locks the Utility menu key, Memory key, Enter key, Escape/Back key, and Parameter setting knob Power Locks the Power switch

73 Key Lock Menu Access can be restricted from each of the above enclosed groups of keys

74 Mixer Mode

75 Mixer Mode - Menus INPUT OUTPUT UTILITY MEMORY

76 Mixer Mode – INPUT Menu Input Channel Name D-001T Specific: Phantom Power (On/Off) NOM Input Sensitivity Bass/Treble Loudness EQ HPF/LPF Compressor Gate

77 Mixer Mode - INPUT Menu ZP-001T Specific Pre-Page Tone (On/Off) Mode (Page Port/Ring) Ducker Cross-point Gain

78 Mixer Mode - OUTPUT Menu Output Channel Name Bass/Treble Loudness Speaker EQ EQ HPF/LPF Compressor Delay

79 TOA Speaker EQ Presets ALL FLAT (default) F-122 H-1 H-2 H-3 HB-1 FB-100 SR-S4 HX-5 FB-120

80 Mixer Mode - UTILITY Menu Stereo Link Paging Trigger Zone Synch Disable NOM Attenuation

81 Mixer Mode - UTILITY Menu Control Input Scene Selection Volume Up/Down Channel On/Off Emergency Mute Power Remote Volume Control Control Output

82 Mixer Mode - UTILITY Menu Keylock Password Serial Speed Slot Firmware Initialize

83 Mixer Mode - MEMORY Menu Save Erase Power On Memory Scene Memory Name

84 Display Error Indication

85 Applications

86 Application Guide

87 Office/retail store: Telephone paging and Music-On-Hold

88 Office/retail store/factory: Multi-zone paging

89 Retail store: Multi-zone paging w/ night ringer & MOH

90 Restaurant/Bar: Multiple sources, jukebox and zone paging

91 Fitness club: Multiple sources, zone paging & digital message repeater

92 Hotel/banquet: Room combining

93 Conference room: 4 microphone conference w/ teleconferencing

94 9000 Series Tools Spec Sheet Manuals Web A&E Guide CAD Pricelist PowerPoint RS-232 Protocol

95 TOA Product Support :00am – 4:30pm PST

96 9000 Series Digital Matrix Mixer/Amplifiers

97


Download ppt "9000 Series Digital Matrix Mixer/Amplifiers. Outline Overview Hardware Modules Remote Control Operation Modes Applications Q&A."

Similar presentations


Ads by Google