Presentation is loading. Please wait.

Presentation is loading. Please wait.

Plasfit - plastic push-in fittings For the drinks dispense and brewing industries.

Similar presentations


Presentation on theme: "Plasfit - plastic push-in fittings For the drinks dispense and brewing industries."— Presentation transcript:

1 Plasfit - plastic push-in fittings For the drinks dispense and brewing industries

2 Plasfit plastic push-in fittings Designed for use in drinks dispense and brewing industries Quick simple connection Highly resistant to accidental tube removal Use with food grade plastic tube and annealed stainless steel tube Hygienic materials Body acetal/M Kematal. Grab ring stainless steel 301S21 ‘O’ Ring food grade nitrile

3 Plasfit component parts Release sleeve Grab ring Backing washer ‘O’ Ring Tube stop Fitting body

4 Range of tube sizes Tube sizes metric 5 mm o/d 6 mm o/d 8 mm o/d 10 mm o/d 12 mm o/d Tube sizes inch 3 / 16 inch o/d 1 / 4 inch o/d 5 / 16 inch o/d 3 / 8 inch o/d 1 / 2 inch o/d

5 Range of thread sizes Taper thread sizes R 1 / 8 R 1 / 4 R 3 / 8 R 1 / 2 Parallel thread sizes G 1 / 8 G 1 / 4

6 Tube and Fitting assembly

7 Tube preparation For plastic tube use a standard tube cutter to give a square end Ensure that the tube end is clean and free from surface damage For metal tube use correct cutting equipment and ensure the tube end is free from burrs 90 0

8 Connecting the tube

9 Push the tube through the release sleeve into the fitting Continue pushing firmly through the teeth of the grab ring and through the ‘O’Ring up to the tube stop Pressure can then be applied

10 Connecting the tube Push the tube through the release sleeve into the fitting Continue pushing firmly through the teeth of the grab ring and through the ‘O’Ring up to the tube stop Pressure can then be applied

11 Connecting the tube Push the tube through the release sleeve into the fitting Continue pushing firmly through the teeth of the grab ring and through the ‘O’Ring up to the tube stop Pressure can then be applied

12 Connecting the tube Push the tube through the release sleeve into the fitting Continue pushing firmly through the teeth of the grab ring and through the ‘O’Ring up to the tube stop Pressure can then be applied

13 Disconnecting the tube

14 Turn off and exhaust the pressure To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there Pull out the tube then release the sleeve

15 Disconnecting the tube Turn off and exhaust the pressure To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there Pull out the tube then release the sleeve

16 Disconnecting the tube Turn off and exhaust the pressure To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there Pull out the tube then release the sleeve

17 Disconnecting the tube Turn off and exhaust the pressure To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there Pull out the tube then release the sleeve

18 Disconnecting the tube Turn off and exhaust the pressure To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there Pull out the tube then release the sleeve

19 Plasfit range of fittings forms

20 Plasfit adaptors Straight adaptors Internal adaptors Straight stem adaptors Swivel elbow adaptors Swivel side tee adaptors Swivel tee adaptors

21 Plasfit tubing connectors Straight connectors Reducing connectors Elbow connectors Sweep elbow connectors Stem elbow connectors Tee connectors Two way splitters Three way splitters Parallel splitters

22 Plasfit fittings Bulkhead connectors Nippled stem connectors Straight nippled adaptors Tailpiece stem adaptors Straight stem connectors Plugs Sleeve depression tool for poor access areas Snap-on cover place over the tube make the joint snap the cover over the fitting body to increase the tamper resistance

23 Plasfit fittings Bulkhead connectors Nippled stem connectors Straight nippled adaptors Tailpiece stem adaptors Straight stem connectors Plugs Sleeve depression tool for poor access areas Snap-on cover place over the tube make the joint snap the cover over the fitting body to increase the tamper resistance

24 End


Download ppt "Plasfit - plastic push-in fittings For the drinks dispense and brewing industries."

Similar presentations


Ads by Google