Presentation on theme: "TILA-RESPA INTEGRATED DISCLOSURES BY: MATTHEW R. FILPI ATTORNEY AT LAW."— Presentation transcript:
TILA-RESPA INTEGRATED DISCLOSURES BY: MATTHEW R. FILPI ATTORNEY AT LAW
GENERAL INFORMATION Rule amends Reg. Z (TILA) and Reg. X (RESPA) to create new “integrated disclosures” for most mortgages: – Combines the initial TIL and the GFE into the new Loan Estimate, and the final TIL and the HUD-1 into the new Closing Disclosure; – New timing requirements for disclosures; – New tolerance levels for disclosed estimates; and – New pre-disclosures requirements. Integrated disclosures apply to applications received on or after August 1, 2015 for “closed-end consumer credit transactions secured by real property.”
GENERAL INFORMATION Applies to most closed-end consumer credit transactions secured by real property. – Does not apply to: (1) HELOCS; (2) Reverse Mortgages; or (3) Chattel-dwelling loans (eg. unaffixed mobile home). – Does not apply to loans primarily for a business, commercial, or agricultural purpose. – Some loans that are RESPA-exempt today WILL BE subject to the Rule, including: (1) Construction-only loans; (2) Lot Loans; and (3) Loans secured by 25 acres or more, if consumer purpose.
TIMING OF THE DISCLOSURES Loan Estimate must be delivered or placed in the mail to the consumer within 3 business days of application. – “Application” means submission of: (1) the consumer’s name; (2) the consumer’s income; (3) the consumer’s social security number to obtain a credit report; (4) the property address; (5) an estimate of the value of the property; and (6) the loan amount sought. (§ (a)(3)). The definition of “application” no longer includes catch-all of “any other information deemed necessary by the loan originator.” Once the 6 pieces of information listed above are collected, then there is an application for purposes of the Rule.
TIMING OF THE DISCLOSURES For purpose of when the lender must deliver the LE (ie. within 3 business days of application), “Business day” means a day where the creditor’s offices are open to the public for carrying out substantially all of it’s business functions. (§ (a)(6)) The LE must be delivered or placed in the mail not later than the 7 th business day before loan consummation. For purposes of the seven day waiting period, “Business day” means all calendar days except Sundays and federal legal public holidays.
TIMING OF THE DISCLOSURES Closing Disclosure must be received by the consumer at least 3 business days prior to consummation. For purposes of when the consumer must receive the CD (ie. at least 3 business days prior to consummation), “Business day” means all calendar days except Sundays and federal legal public holidays. The “all calendar days...” definition also applies to other requirements, such as calculating when a lender may impose fees, provision of a revised LE, etc.
TIMING OF THE DISCLOSURES If the LE and/or CD is not provided to the consumer in person, the consumer is presumed to have received it three business days after it is delivered or placed in the mail. This includes electronic delivery. (§ (e)(1)). The creditor may, alternatively, rely on evidence that the consumer received the LE and/or CD earlier than three business days after delivery. – Examples include acknowledging receipt or signing for a Fed Ex package. – Requires E-Sign Act compliance for electronic delivery!!!
PRE-DISCLOSURE RESTRICTIONS No fees may be imposed on the consumer before the consumer has received the LE and indicated to the creditor an intent to proceed: – Exception for bona fide and reasonable fee for obtaining the consumer’s credit report. If a consumer is provided with a written estimate of terms or costs before receiving the LE: – Top of the first page must contain a statement that “Your actual rate, payment, and costs could be higher. Get an official Loan Estimate before choosing a loan.”; – The estimate may not be made with headings, content, and format substantially similar to the LE form and must be in no smaller than 12-point font. The creditor may not require a consumer to submit documents verifying information related to the application before providing the LE.
THE LOAN ESTIMATE Must provide the consumer with a good faith estimate of credit costs and transaction terms, be in writing, and contain the information prescribed in Reg. Z, Section (as shown in Appendix H-24). LE is a 3 page document with the information the CFPB deemed most useful to consumers prominently displayed on page 1. – Certain information removed from the Loan Estimate (e.g. finance charge, approximate cost of funds) or de-emphasized (APR); If a mortgage broker receives the consumer’s application, either the creditor or the mortgage broker may provide the consumer with the LE. (§ (e)(1)).
THE LOAN ESTIMATE (CONTD.) An “alternative” format for the LE may be provided on loans where the transaction does not include a seller. The alternate format includes different tables for “costs at closing” on page 1 of the LE (§ (d)(2)) and for “calculating cash to close” on page 2 (§ (h)(2)). Written List of Service Providers (§ (e)(1)(vi)(C)): If the creditor permits the consumer to shop for a settlement service, then the creditor must provide a written list identifying at least one provider for that service and include a statement that the consumer may choose a different provider for that service.
THE LOAN ESTIMATE (CONTD.) Creditors are bound by the LE. Revisions are only permitted in limited circumstances (§ (e)(3)(iv)): – Changed circumstances that occur: (1) after the LE is provided is provided that cause settlement charges to increase more than permitted; or (2) after the LE is provided that affect the consumer’s eligibility for the loan or the value of the collateral. – Consumer-requested revisions to the loan terms or charges. – Changes in the points or lender credits disclosed on the LE as a result of a subsequent rate lock. – Consumer indicates an intent to proceed more than 10 days after the LE was provided.
THE LOAN ESTIMATE (CONTD.) Tolerance Limitations (§ (e)(3)) – Just like the current GFE/HUD-1, there are “buckets” for zero tolerance, 10% tolerance, and no tolerance. NO TOLERANCE BUCKET (Charges may exceed amount disclosed by any amount): – Prepaid interest; property insurance premiums; amounts placed into an escrow, impound, reserve, or similar account. – Services required by the creditor if the creditor permits the consumer to shop and the consumer selects a third-party service provider not on the creditor’s written list of service providers. – Charges paid to third-party service providers for services not required by the creditor.
THE LOAN ESTIMATE (CONTD.) 10% TOLERANCE BUCKET (Cumulative Tolerance): – Recording fees; – Charges for third-party services where: (1) the charge is not paid to the creditor or an affiliate; and (2) the consumer is permitted to shop, but selects a third- party service provider on the creditor’s written list of service providers. ZERO TOLERANCE BUCKET (Creditor may never charge more than the amount disclosed unless there is a changed circumstance or other triggering event): – Fees paid to the creditor, mortgage broker, or an affiliate of either; – Fees paid to an unaffiliated third party if the creditor did not permit the consumer to shop; – Transfer taxes.
CLOSING DISCLOSURE CD delivery requirements (§ (f)): – A creditor is generally responsible for ensuring that the consumer receives the CD no later than 3 business days before consummation. May contract with a settlement agent to provide the CD on the creditor’s behalf. – The settlement agent must provide the Seller with the CD in purchase transactions. – If the CD is not provided to the consumer in person, the consumer is considered to have received it 3 business days after it is delivered or placed in the mail (including electronic delivery). Creditor may rely on alternative evidence of receipt.
CLOSING DISCLSOURE (C0NTD.) Revisions and corrections to CD before consummation (§ (f)(2)) – Three categories of changes require a corrected CD containing all changed terms: Changes before consummation that require a new three-business-day waiting period; – If disclosed APR becomes inaccurate – If the loan product changes – If a prepayment penalty is added Changes before consummation that do not require a new three-business-day waiting period; – Other changes that are not one of the above. – Consumer has the right to inspect the revised CD during the business day before consummation.
CLOSING DISCLOSURE (CONTD.) Revisions and corrections to CD after consummation (§ (f)(2)) – A corrected CD is required after consummation: When an event in connection with the settlement that causes the CD to become inaccurate and that results in a change to an amount paid by the consumer or seller occurs within the 30-day period after consummation; To document refunds for tolerance violations; To correct non-numerical clerical errors – An error is “clerical” if it does not affect a numerical disclosure or the timing, delivery, or other requirements imposed by § (e) or (f).
Curing Tolerance Violations Tolerance violations must be cured with appropriate refunds to the consumer (§ (f)(2)(v)): – If amounts paid by the consumer at closing exceed the amounts disclosed on the LE beyond the applicable tolerance threshold then: The creditor must refund the excess to the consumer no later than 60 days after consummation; and The creditor must deliver or place in the mail a corrected CD that reflects the refund no later than 60 days after consummation.
FINAL THOUGHTS/WARNINGS The new rule presents challenges well beyond simply re-formatting the GFE/HUD-1/TIL. – The rule includes many substantive requirements beyond the disclosures themselves: including timing of transactions, dealing with third-party settlement service providers (especially settlement agents!) – Creditor is required to effective guarantee prices for certain third-party fees that the Creditor does not control. – MUST ASSUME TILA LIABILITY!!! (STATUTORY PENALTIES, PRIVATE CAUSE OF ACTION, ASSIGNEE LIABILITY, ETC.)
Matthew R. Filpi Attorney - PeirsonPatterson, LLP * Licensed in Texas, North Carolina, and D.C.