Presentation on theme: "Classroom Technology Training for Eno Board, Epson Document Camera, Dell Dock, and Sanyo Projector Presented by Chris Walsh August 9 th, 2011 Goodridge."— Presentation transcript:
Classroom Technology Training for Eno Board, Epson Document Camera, Dell Dock, and Sanyo Projector Presented by Chris Walsh August 9 th, 2011 Goodridge Elementary
Objectives 1. Install Software 2. Hardware Overview a. Projector b. Dock c. Document Camera d. Eno Board – Interactive White Board 3. System Set-up Procedures a. Document Camera b. Eno Board – Interactive White Board 4. Software Overview a. Polyvision b. RMEasiTeach c. Microsoft Office (Word, PowerPoint) d. Think Central (website) e. KET Online Resources (website) f. RMEasiLearn (website) 5. Resources/Questions/Explore
Install Software O Eno Polyvision O RMEasiteach ** These will be a one time install.
Hardware - Projector O Power on and off O Adjustments O Zoom O Focus O Foot O Auto Keystone O Remote O Power on and off O Freeze O Keystone O No Show O Auto Set O Location Recommendations O Filter Warnings
Sanyo Projector Top Button Layout Power Auto Setup
Sanyo Projector Remote Auto Set Power Keystone Freeze No Show
Hardware - Dock O Buttons O Lock O Eject O Guide O Ports O USB O VGA O Audio Out O Inserting Computer O Power Supply
Dell Docking Station Ethernet Port Usb Speaker Microphone Lock/Unlock Eject Guide
Hardware - Document Camera O Flexibility O Adjustable Lens O Guide Arrows O Buttons O Power O Source O Zoom (in/out) O Focus O Freeze O Light
Epson Document Camera Freeze Zoom Power Source Focus
Hardware – Eno Board O Eno Board O Interactive White Board O You CAN write on it with Dry Erase Markers O Magnetic O Always line projector up with Eno Board O Pen O Requires Bluetooth Dongle O Powers on and off when lid is removed O Always have extra batteries (AAA)
System Set-up – Document Camera 1. Power on projector. 2. Power on Document Camera. 3. Select “Document Camera”. 4. Align projector to Eno Board. 5. Begin using Document Camera.
System Set-Up – Eno Board 1. Insert computer in dock. 2. Insert Bluetooth dongle into USB port on dock. 3. Power on projector. 4. Power on computer. 5. Do NOT power on document camera. 6. Computer image should appear on screen, if not push the “Fn” and “F8” and select “Duplicate” 7. Change your resolution to 1024X768 by right clicking on the desktop, select “Properties”, then the “Settings” tab, and then change the resolution slider and click “Apply” 8. Align projector to Eno Board. 9. Orientate board using pen by tapping the “+” sign on the magnetic strip. 10. Begin using board.
Eno Pen Set-up - Pairing 1. Turn on Computer 2. Plug in the Bluetooth Dongle 3. Click the Polyvision Driver in the system tray (by the clock). 4. Choose “Configure Polyvision Drive”. 5. Select the “Hardware” tab. 6. Turn on the stylus by removing the cap, then click “Pair Stylus”. Pairing proceeds automatically for most computers. **This should only have to be done one time.**
Software - Polyvision O Use the System Tray Icon for pairing. O All other functions use the magnetic strip.