1. IECEE CB Scheme – a tool to ensure products access to the Russian market

2. National statutory acts governing participation in IECEE 1. Decree No 963-r of the Government of the Russian Federation dated July 17, 2001 entrusting Gosstandart of Russia with participation in IECEE. 2.Decree No 2236-R of the USSR Council of Ministers dated October 24, 1985 for joining IECEE. 3.Decree No 526-r of the Government of the Russian Federation dated April 17, 2006 entrusting the Federal Agency on Technical Regulation and Metrology with responsibility of ensuring participation of the Russian Federation in IECEE.

3. NCB organization chart THE BOARD OF APPEAL Governing board VNIIS The Executive Board V.Ya.TimkoHead Test Laboratories TLs accepted within the CB Scheme Federal Agency of Technical Regulation and Metrology NCB GOST Re S.V.PugachevHead

4. Level of harmonization of national standards with IEC Standards average level of harmonization of low voltage standards - 35% level of harmonization of low voltage standards belonging to IECEE categories - over 60%

5. New Approach Low Voltage Directive 72/23/EEC Low Voltage Directive Guidelines – official publication of the European Commission IECEE Rules and Procedures ( Russia participates in IECEE since 1985: Decree No 2236-R of the USSR Council of Ministers dated October 24, 1985; Decree No 526-R of the Government of the Russian Federation dated April 17, 2006 Regulatory base – about 300 IEC standards 3 The concept of the Low Voltage Technical Regulation is based on the following international documents:

6. Requirements relating to all technical regulation items Mandatory safety requirements for all types of low voltage equipment 1. The low voltage equipment design must rule out electrical shock in normal operation....................... 19. All moving parts of low voltage equipment which may be a potential cause of injuries must be located, enclosed and safeguarded to ensure the required protection of users from possible injuries To meet the requirements of this clause one may voluntarily use national standards from the list published in the organ of the federal body for technical regulation and in the public information system

7. Correlation between mandatory safety requirements included in the Low Voltage Technical Regulation and national standards as an evidentiary base for attestation Technical regulations 19 19 clauses containing requirements Embedded (reference) standards over 2000 National standards 390 (harmonization level – 75%

8. CB Certificate recognition arrangement NCB GOST Re CB 1 CB n applicant GOST R Certificate Recognitionagreement applicant CB 2 GOST R Certificate GOST R Certificate GOST R Certificate

9. Providing services to exporters of electrical equipment UL Interna- tional Demko A/S, Denmark LCIE, France IMQ S.p.a, Italy Intertek Semko AB, Sweden Underwriters Laboratories Inc., USA Certificates GS, CCA, ENEC, OVAG, Keymark etc. applicant NCB GOST Re CB, СЕ

10. Providing CE marking services CE client Scopes of LVD and EMC Directives IECEE CB Scheme Exhaustive requirements CB Certificate Testing done by notified body Testing done in Russia Is testing in Russia possible? Applying to notified (authorized) body in EC Assisting with execution of CE declaration and technical file, issuing voluntary certificates of conformity to LVD and EMC Directives No No Yes YesYes No

11. Selecting attestation forms Declaration Certification EC Guidelines to Directive 73/23/ЕЕС. published by EC in July 1997 IECEE Article 24. Declaration of conformity Article 25. Mandatory certification Federal Law on Technical Regulation APPLICANT

12. Attestation For attestation purposes hazard ranking of low voltage equipment is used. To attribute low voltage equipment to one of hazard groups the following criteria apply: - amount of safety requirements to be met to ensure safety of low voltage equipment; -number of units of a given type of low voltage equipment put in operation; - minimum qualification level of persons allowed to use this low voltage equipment; - applicability of other forms of conformity assessment as specified in the Federal Law on Technical Regulation. Conformity assessment procedures meeting the criteria valid for each particular product are based on applicable statistics obtained during monitoring of mandatory attestation results.

13. Attestation under Low Voltage Technical Regulation by approved declaration of conformity Sche me No Declaration schemes Validity of declarations Notes Low hazard level Hazard level number 123 1д Declaration based on own proofs 1 year --- 2д Declaration and ATL testing - 1 year 9 mon. 6 mon.. No period specified for production lot 3д Declaration and ATL testing + Quality system (testing) - 3 years Annual surveillance Quality system (testing) 4д Declaration and ATL testing + Quality system (full)- 5 years Annual surveillance Quality system (full)

14. Attestation under Low Voltage Technical Regulation by certification Sche- me No Certification schemes Surveillance conditions PeriodNotes 1с1с1с1сATL Annual surveillance and ATL testing 5 years No period and surveillance specified for production lot 2с2с2с2с ATL + Quality system (testing) Annual surveillance Quality system (testing) 5 years May be recommended to the applicant, provided the applicant has a CB Certificate 3с3с3с3с ATL + Quality system (full) Annual surveillance Quality system (full) 5 years May be recommended to the applicant, provided the applicant has a CB Certificate

15. Relationship between IECEE certification schemes and Low Voltage Technical Regulation certification schemes IECEE CB Scheme IECEE CB FCS CB-FCS 2c or 3c certification schemes TESTINGTESTING IECEE CB-FCS 117 IECEE standard forms GOST R 52549-2006- based assessment of manufacturer’s quality system in accordance with IECEE CB-FCS 101 CERTIFICATE CERTIFICATE REPORT REPORT