Presentation on theme: "Technical Drawing UMAMS Design and Engineering B-211 – Tech Lab Mr. Cullen."— Presentation transcript:
Technical Drawing UMAMS Design and Engineering B-211 – Tech Lab Mr. Cullen
Introduction The entire world depends upon technical drawings to convey the ideas that feed today’s industrialized society. Architectural, structural, electric, electronic, machine, plumbing, and piping drawings are all forms of mechanical/technical drawings. When rendering technical drawings, accuracy, neatness, technique, and speed in execution are essential. Inaccurate drawings could be worthless or lead to costly errors.
Technical Drawing Technical drawing is a necessarily broad term that applies to any drawing used to express technical ideas. Technical drawings are usually mechanically sketches refined by using straightedges, triangles, and drafting instruments. Drawings are now often completed used Computer Aided Drafting software. Many of these drawings begin as a form of sketching.
Technical Sketching Technical sketching is a freehand sketch. The only equipment required to execute technical sketches are soft pencils, paper, and eraser. The novice sketcher may find paper that is cross sectioned with ruled lines beneficial in establishing and maintaining scale. There are gridded papers, isometric papers for isometric sketches, and perspective papers for sketches requiring perspective available. When selecting an eraser, chose a soft or artgum eraser.
Types of Sketches Types of sketches Since technical sketches and drawings represent three- dimensional objects, your sketches should conform to one of the four standard types of projection. The four major types of projection are (1) multiview – 3 view 2-D drawing (2) axonometric – pictorial 3-D drawing (3) oblique – pictorial 3-D drawing (4) perspective – pictorial 3-D drawing