1. Maintenance & Fluids Mixer Seminar Presented By: Rich Gochenour

2. Section 2 (Maintenance) Page 3 Continuous Monitoring Check from wet appearance on gears, tire and support roller Monitor unusual or irregular sound while mixer is operating

3. Section 2 Page 3 Daily Maintenance Check oil distribution on ring gear, tire and support roller Check auto oilier and fill 80w90 Gear Lube or 85w140 Gear Lube Check hydraulic fluid level in sight glass of reservoir

4. Section 2 Page 3 Weekly Maintenance Grease Support Roller Bearings (4 zerks) Grease Tilt Cylinder Pins (4 zerks) Grease Tilt Pins (4 zerks) Grease Mixer Drive Reducers (2 zerks) Bearings and Pins-high quality extreme pressure bearing grease

5. Section 2 Page 5 Grease Locations

6. Section 2 Page 3 Monthly Maintenance File the “Monthly Inspection” Check Oil Level in the Gear Reducer Replace Hydraulic Filters Replace quarterly or as needed 10 micron absolute

7. Section 2 Page 7

8. Section 2 Page 4

9. Section 2 Page 3 Annual Maintenance Drain and Replace Gear Reducer Oil Oil-API-GL-5, No.80 or 90-capacity 80 oz. Drain and Replace Hydraulic Fluid. Replace the hydraulic filters and clean tank. 120-140 Gallon See list of recommended fluids.