Download presentation

Presentation is loading. Please wait.

Published byAnnette Sneary Modified over 2 years ago

1
GBK G EOMETRY Jordan Johnson

2
T ODAY ’ S PLAN Greetings / Objectives Warm-up Lesson: Basic Geometric Terms Assignment / Questions Clean-up

3
W ARM - UP With your compass and straightedge, construct an equilateral triangle with sides 3cm long. If you remember how, continue and construct a regular hexagon with sides 3cm long.

4
T HE N AZCA L INES

8
O BJECTS ( BY DIMENSIONS ) Zero- dimensional One- dimensional Two- dimensional Three- dimensional pointline, line segment planespace “no part”“breadthless length” length and width length, width, and depth

9
D EFINITIONS Zero-dimensional: Point : a location in space. (Represented on paper by a dot, usually, but has no dimensions.) One-dimensional: Line : a straight length that has no breadth (Or, a one-dimensional object extending infinitely in both directions.) Note that lines are defined by two points. Line segment : part of a line, bounded by two endpoints. Two-dimensional: Plane : a flat surface with no boundaries.

10
S KETCHES Sketch examples of lines, points, and planes (to go with your definitions). Note: use arrowheads to indicate infinite extension of lines: Name points with uppercase letters.

11
C LOSED F IGURES Polygons – 2-dimensional, bounded by line segments Examples: triangle rectangle pentagon Polyhedra – 3-dimensional, bounded by polygons Examples: cube pyramid

12
Q UALITIES OF L INES, P LANES, & P OINTS Lines intersect in points; planes intersect in lines. Collinear points lie on a single line. Non-collinear points do not. Coplanar points lie within a single plane. Non-coplanar points do not. Concurrent lines all contain the same point.

13
R EMARKS ON W ORK ; A DVICE FROM P AST S TUDENTS

15
A SSIGNMENT Now: Textbook, p. 10, Chapter 1 Lesson 1, Set I. Work alone or in pairs. Homework due Tuesday: the Set I problems and p. 11, Chapter 1 Lesson 1, Set II. Remember: Neat writing. Show enough to tell what the original problem was.

16
C LEAN - UP / R EMINDERS Pick up all trash / items. Push in chairs (at front and back tables). See you tomorrow!

17
R EMAINING S LIDES : P ERIOD 1 The following slides were used in Period 1’s class.

18
T ODAY ’ S PLAN (P ERIOD 1) Greetings / GBK Today (period 1) Warm-up Objectives Lesson: Basic Geometric Terms Assignment / Questions Clean-up

19
W ARM - UP With your compass and straightedge, construct an equilateral triangle with sides 3cm long. If you remember how, continue and construct a regular hexagon with sides 3cm long.

20
O BJECTIVES Objective tables: The slips of paper you got yesterday. Describe what you have to do to pass. Student progress chart: Page with grids where you will track your progress. 4.0 I have mastered everything in the 3.0 level and can make neat, accurate sketches of all the shapes and intersections involved, including the 3-D shapes. 3.0 I know all the terms listed in the 2.0 level, and I can give their exact definitions, as well as those of collinear, coplanar, and concurrent. I can tell you how many dimensions each of those shapes requires, and I can write point/line/ray/segment names correctly. I can say what happens when lines and planes intersect. 2.0 I have a basic idea of what points, lines, line segments, planes, rays, angles, polygons, and polyhedra are; I could sketch any of those if you ask me to, and I can tell which ones are 3- dimensional and which are 2-dimensional.

21
Q UALITIES OF L INES, P LANES, & P OINTS Lines intersect in points; planes intersect in lines. Collinear points lie on a single line. Non-collinear points do not. Coplanar points lie within a single plane. Non-coplanar points do not. Concurrent lines all contain the same point.

22
C LOSED F IGURES Polygons – 2-dimensional, bounded by line segments Examples: triangle rectangle pentagon Polyhedra – 3-dimensional, bounded by polygons Examples: cube pyramid

23
R EMARKS ON W ORK ; A DVICE FROM P AST S TUDENTS

25
A SSIGNMENT Now: Textbook, p. 10, Chapter 1 Lesson 1, Set I. Work alone or in pairs. Homework due Tuesday: the Set I problems and p. 11, Chapter 1 Lesson 1, Set II. Remember: Neat writing. Show enough to tell what the original problem was.

26
C LEAN - UP / R EMINDERS Pick up all trash / items. Push in chairs (at front and back tables). See you tomorrow!

Similar presentations

Presentation is loading. Please wait....

OK

Geometry 1-1 Understanding Points, Lines, and Planes.

Geometry 1-1 Understanding Points, Lines, and Planes.

© 2017 SlidePlayer.com Inc.

All rights reserved.

Ads by Google

Ppt on power system optimization Ppt on chapter 3 atoms and molecules powerpoint Notebook backgrounds for ppt on social media Ppt on porter's five forces Ppt on balanced diet for adolescent Ppt on power generation in india Ppt on greenhouse effect Ppt on power grid failure Ppt on business etiquette in other countries Ppt on optical packet switching network