Presentation is loading. Please wait.

Presentation is loading. Please wait.

FCI Product portfolio selection. 1. Backpanel Connectors 1.80 mm (0.071 in.) - ZipLine™ 2.00 mm(0.079 in.) /3.00 mm (0.12 in.) - Airmax VS® 2.00 mm (0.079.

Similar presentations


Presentation on theme: "FCI Product portfolio selection. 1. Backpanel Connectors 1.80 mm (0.071 in.) - ZipLine™ 2.00 mm(0.079 in.) /3.00 mm (0.12 in.) - Airmax VS® 2.00 mm (0.079."— Presentation transcript:

1 FCI Product portfolio selection

2 1. Backpanel Connectors 1.80 mm (0.071 in.) - ZipLine™ 2.00 mm(0.079 in.) /3.00 mm (0.12 in.) - Airmax VS® 2.00 mm (0.079 in.) - Metral® Core 2.00 mm (0.079 in.) - Metral ® High speed 2.00 mm (0.079 in.) - Millipacs® 2.54 mm (0.100 in.) - DIN mm (0.100 in.) - HPC™

3 3 1.80mm (0.071 in.) - ZipLine™ Documentation Brochure: Connector Overview Product documentation: ZiplLine™ Product Documentation: Hard Metric High-Power Connectors Useful link Product Focus: ZipLine™ e-Catalog The Zipline™ connector system addresses customer demand for Maximum signal density – a paramount requirement for future equipment platforms at data up to 12.5 Gb/s. FEATURES Supports backplane and orthogonal midplane applications 72 differential pairs on 1.88mm column pitch deliver 84.6 differential pairs per inch of card edge while allowing a minimum 1-inch card slot pitch Provides maximum signal density available at data rates up to 12.5 Gb/s Use AirMax VS® edge-coupling technology to deliver low insertion loss and crosstalk Allows for a mixed differential (orthogonal or backplane), single- edge or power pin assignments within a connector APPLICATIONS Various Backplane applications Various Orthogonal applications

4 4 With AirMax VS® connector system, FCI is giving backplane system designers the freedom to rethink the way products are designed. Based on a radical design concept, AirMax VS® (Virtual Shield) connectors eliminate the need for interleaving ground shields by using air as highly efficient dielectric. FEATURES A full set of building blocks for backplane, co-planar, mezzanine, and cable-to-board applications in Hard Metric building practices Innovative edge-coupling technology and air dielectric between adjacent conductors deliver lowest insertion loss and crosstalk High-speed serial data rates can scale from 2.5 Gb/s to beyond 12 Gb/s without requiring redesign of a basic platform Opposed dual-beam receptacle contact structure provides high reliability Contains no interleaving shields reducing connector weight, cost and PCB routing complexity. Lead-free and RoHS-compatible options are available APPLICATIONS Servers, Storage IP router, switches & gateways Enterprise routers Base stations ATCA™ zone 3 Medical and test equipment Documentation Brochure: Connector Overview Product Documentation: SBB application Product Documentation: Airmax orthogonal connectors Useful links Product Focus: Airmax VS ® e-Catalog 2.00 mm(0.079 in.) /3.00 mm (0.12 in.) - Airmax VS®

5 5 2.00mm (0.079 in.) - METRAL ® Core METRAL ® connector range is the 2mm standard board-to-board and cable- to-board interconnect system designed in accordance with IEC and performance according to Telcordia ® GR-1217-CORE. FEATURES Low-cost application solutions: Press-Fit termination for backplanes Pin-in-Paste terminations for daughter cards Scalability and flexibility: Mix low and high speed signal modules Mix signal and power modules Power Distribution solutions: Ranging from 3 amps up to 60 amps Straight or inverse solutions Complete I/O solutions: Rear-plug-up or front I/O Shielded or non-shielded APPLICATIONS Transmission & switching equipment for data, telecommunication and medical. Docmentation Brochure: Connector Overview Catalog: Metral Pin-in-Paste Product Documentation: Metral Selector guide Useful links Product Focus: Metral® Core Product Selector e-Catalog

6 6 2.00mm (0.079 in.) - METRAL ® High Speed The METRAL® High Speed Backpanel Connectors series 1000, 2000 and 4000 are designed for a signal performance of 5Gbps and more. FEATURES Architecture according to IEC Performance according to Telcordia* GR1217-CORE Part of the Metral® system to allow performance and cost efficiency 2 mm square pitch for efficient straight vertical and horizontal routing 5 and 8 row APPLICATIONS Servers Data Storage devices Switches Transmission Docmentation Brochure: Connector Overview Brochure: Metral® High Speed Connector Useful links e-Catalog

7 7 2.00mm (0.79 in.) - Millipacs ® The Millipacs® is a metric connector range which is designed in accordance with IEC 917 and IEC FEATURES Modular system with 5+2 row and 8+2 row high density connectors Hard metric board and cable connector offering Extended functionalities: staggered contacts, shielding, keying, guiding, power and coax inserts, shrouds. High density connections. Compact PCI APPLICATIONS Switches Base stations Embedded computers Medical testing equipment PLC’s Docmentation Brochure: Connector Overview Useful links e-Catalog

8 8 2,54mm (0.100 in.) - DIN The DIN connector line is a full interconnect system for board-to-board and I/O solutions in signal and power. FEATURES Standardized per DIN Full interconnect system BTB and I/O solutions Signal and power Low cost application solutions Press-fit termination, receptacle and header IDC cable termination APPLICATION Switching Transmission Radio base stations PBX’s More about : Brochure: Connector Overview Useful link: e-Catalog

9 9 2,54mm (0.100 in.) – HPC ™ Documentation Brochure: Connector Overview Useful link e-Catalog The High Pin Count connector system is a traditional 3-4 row backplane interface which provides rugged mechanical and Electrical performance. FEATURES square posts and formed signal contacts provide rugged mechanical interface and excellent electrical performance Press-fit and solder tail options provide design and PCB assembly flexibility Connector sizes from 30 to 600 circuits to satisfy a variety of applications Beryllium Copper receptacle contacts offer high reliability and low mating forces Custom signal, power or coax configurations are also available APPLICATIONS Various industrial and instrumentation applications

10 2. Flex Cable and Board Connectors mm (0.012 in.) / 2.54mm (0.100 in.) --FFC – FPC

11 mm (0.012 in.) / 2.54mm (0.100 in.) - FFC – FPC The FCI Flex Circuit Connectors are the most innovative and complete range of products in the industry. FEATURES 0.30 – 0.40 – 0.50 – 1.00 – 2.54 mm pitch sizes Highly reliable Gas Tight High pressure (GTH) contact system Zero Insertion Force (ZIF) and Low Insertion Force (LIF) options Straight and right-angle versions Surface mount and through hole Top and bottom contacts APPLICATIONS LC Display to Board connections Interior Automotive electronics Membrane switches DVD / HDD connection Mobile phone and Digital Camera Documentation Brochure: Connectors for Flexible Circuitry Product Documentation: FFC/FPC and Clincher™ Connector Overview Useful links e-Catalog

12 4. Board and Wire connectors 0.80 mm (0.031 in) - BergStak® 1.0 mm (0.039 in.) - Conan® 1.27 mm (0.050 in.) Rib-Cage™ 2.00 mm (0.79 in.) - Minitek™ 2.54 mm (0.100 in.) Dubox™, PV® & BergStik® 2.54 mm (0.100 in.) - Quickie® Card Edge Connectors - PCI Card Edge Connectors - MicroTCA™ Card Edge Connectors - Right Angle Memory Module Connectors Mezzanine Connectors Gig-Array® Mezzanine Connectors Meg-Array®

13 mm (0.031 in.) BergStak ® FCI’s compact BergStak® 0.8mm pitch connector series offers an extensive range of stack heights and circuit sizes to support a wide range of mezzanine, board-stacking applications. The connectors are available in sizes from 40 to 200 positions in increments of 20 positions. The available stack heights range from 5mm to 16mm in increments of 1mm. FEATURES Dual rows of contacts on 0.8mm (0.031 in.) pitch Part sizes span from 40 to 200 contact positions, in increments of 20 positions Connector combinations for 5.0mm (0.197 on.) to 16.0mm (0.630 in.) mated height, in increments of 1.0mm (0.39 in.) to accommodate designs that require wider board spacing to provide clearance for larger components or increased air flow for cooling Blade-on-beam contact design prevents contact damage from the “peeling” during mating or unmating APPLICATIONS Mobile phones, PDA’s, Pagers, digital cameras, scanners Mobile, personal and high end computing Server and routers Measuring equipment & industrial control Documentation Product Documentation: BergStak® Useful links e-Catalog

14 14 The Conan 1.0mm mezzanine connector system provides a mechanically secure, high density electrical interface between parallel printed circuit boards. Conan’s mechanical features and palladium/nickel/gold plated electrical contacts qualify it for high reliability use in portable and mobile electronic equipment. FEATURES SMT mounting with SMT hold-down for increased strength Mating polarization prevents backward connections PCB polarization prevents manufacturing errors Tape and reel packaging supports automated assembly. Ideal for Portable Electronics APPLICATIONS Mobile phones, PDA’s, Pagers Digital cameras, scanners Mobile, personal and high end computing Server and routers Office equipment Measuring equipment Industrial control Documentation Brochure: Connector Overview Product Documentation: Conan® Useful links Product Focus: Conan® e-Catalog 1.00mm (0.039 in.) Conan ®

15 15 Rib-Cage™ connectors optimize reliability in demanding applications. Rib-Cage™ is a versatile family of two-piece, two-row pin-and-socket connectors for right angle and mezzanine connections between printed circuit boards (PCB) or flexible printed circuits (FPC). FEATURES Receptacle Contact has 3 pts of contact for reliable, fault- tolerant connections 100 grams normal force ensures reliable electrical contact especially for shock and vibration applications Tapered lead-in pin design assists with easy mating Surface mount design enables easy PCB assembly Polarized housing design prevents mis-mating APPLICATION Shock resistant and vibration-resistant electronics Medical and instrumentation Handheld testing Electronics subassemblies attached to motor, fans and mechanical devices Documentation Brochure: Connector Overview Product Documentation: Rib-Cage™ Useful links Product Focus: Rib-Cage™ e-Catalog 1.27mm (0.050 in.) Rib-Cage™

16 16 With its Minitek™ range, FCI is one of the leading suppliers of 2.00 mm pitch board-to-board and wire/cable-to-board connectors. As more and more PCB designers are made with this pitch size, FCI continues to expand its extensive range. FEATURES Versatile 2 mm modular system includes board-to-board, wire-to-board and flat cable interconnects, offering complete design flexibility Up to 38% space saving compared to 2.54 mm pitch Range: 2x2 to 2x25 positions Early point-of-contact on low profile receptacles enhances reliability Selective plating is reliable and economical APPLICATION Electronic equipment or devices requiring a parallel, planar or perpendicular board-to-board or wire-to-board connections. Uses span industry segments (e.g. base stations, measuring equipment, industrial control, computers) 2.00mm (0.079 in.) Minitek™ Documentation Brochure: Connector Overview Product Documentation: Minitek™ Unshrouded Vertical Headers Useful links Product Focus: Minitek™ e-Catalog

17 mm (0.100 in.) Dubox™, PV ® & BergStik ® The Dubox™, PV ® & BergStik ® connectors are the proven versatile 2.54 mm modular system includes board-to-board, wire-to-board, offering complete design flexibility. FEATURES Range: 1x2 to 2x36 positions Selective plating is reliable and economical Easy part number selection at FCI Basics+ web site PV ®, superior performance, high reliability contact for shock and vibration applications Dubox™, dual beam box contact Bergstik ® unshrouded headers available in custom configurations APPLICATIONS Electronic equipment or devices requiring a parallel, planar or perpendicular board-to-board or wire-to-board connections. Uses span industry segments (e.g. base stations, measuring equipment, industrial control) Documentation Brochure: connector overview Product Documentation: Dubox™ & BergStik® Useful links Product Focus: Dubox™ Product Focus: PV® Product Focus: BergStik® E-Catalog

18 18 Quickie™ is FCI’s brand for cable-to-board connectors in 2.54mm pitch. The Quickie™ product range includes IDC Receptacles, IDC Board Connectors, Shrouded Low Profile Headers and Shrouded Eject Latch Headers. FEATURES Two-row connectors are available in industry-standard sizes ranging from 10 to 60 total positions Molded header shroud protects pins, assists alignment during mating and provides polarization capability. Headers with pre-installed latches eliminate the need for later hand installation of latches The “Eye-of-Needle” compliant section on pin termination tails reduces the stress on plated-through holes during connector insertion to enable easy installation on lead-free boards APPLICATIONS Electronic equipment or devices requiring flat cable interconnections Uses span industry segments (e.g. base stations, measuring equipment, industrial control) Documentation Product Documentation: Quickie™ Useful link Product Focus: Quickie™ e-Catalog 2.54mm (0.100 in.) Quickie™

19 19 Card Edge Connectors - PCI The 1.0mm pitch vertical Card Edge Connectors are used to implement PCI Express ® architecture in desktop PCs, workstations and servers. FEATURES Range offers 1,4,8 or 16 serial PCI Express links to scale to different bandwidth requirements Options for through-hole solder, press-fit, surface mount or straddle- mount terminations. Straddle-mount connectors feature mounting ears for additional mechanical support and a molded post to assure proper alignment to the host PCB. Options for rugged stand-alone retention mechanisms or a x16 connector with an integrated retention arm to retain graphics cards during shipping and handling. ExpressModule™ versions provide an expanded lead-in window for blind-mate server riser cards. APPLICATION Desktop PCs Servers Workstations SHB Express backplanes per PICMG 1.3 specification Documentation Brochure: connector overview Product Documentation: PCI Express Card Edge Useful links e-Catalog

20 20 Card Edge Connectors - MicroTCA™ The vertical card-edge connectors provide 170 contacts on 0.75mm Pitch and enable AdvancedMC™ modules to be plugged directly to a backplane. FEATURES 170 position card edge interface with 0.75mm contact pitch Options for press-fit or surface mount termination Metal retention clips at ends of SMT connector provide additional mechanical strength after soldering Very low loss and crosstalk for low-voltage differential signaling at data rates up to 12.5 Gb/s per lane. SMT footprint allows for increased flexibility in routing PCB traces APPLICATIONS Radio Base Stations RF antenna units IP gateways Enterprise swithes Customer premises equipment (CPE) Documentation Brochure: connector overview Product Documentation: MicroTCA™ Useful links e-Catalog

21 21 Card Edge Connectors - Right Angle The Card Edge Connectors enable the use of high-speed, hot-pluggable transceiver modules that can easily installed and removed by horizontal front-panel access. FEATURES 0.8mm pitch connectors accept 1.0mm thick PCBs used in MSA- complaint pluggable transceiver modules. Available 20, 30 and 70-position sizes provide interfaces for SFP, XFP,XENPAD, X2 or XPAK modules Surface mount termination Excellent electrical performance to 6 GHz Formed contacts provides smooth contact surfaces for improved reliability APPLICATION Switches Routers Network interface cards (NICs) Host bus adapters (HBAs) Servers Storage systems Storage controller cards Documentation Product Documentation: Right Angle Card Edge Connectors Useful links e-Catalog

22 22 Memory Module Connectors ® The DDR2 Memory module sockets from FCI accept industry standard FB DIMM, DIMM or SO-DIMM assemblies. FEATURES Support of various DDR standard modules: DDR, DDR2, DDR3 0.6mm, 0.8mm, 1.00mm and 1.27mm pitch Multiple pin count and contact pitches available to support most common industry standard form factors; Low Profile and Very Low Profile versions to support applications requiring low seating height; SMT, TMT and PF versions available. APPLICATIONS Servers Workstations Desktop and notebook PC’s Routers and switches Base stations Embedded systems Documentation Brochure: connector overview Product Documentation: DDR2 Memory Module Sockets Useful links e-Catalog

23 23 The GIG-ARRAY ® connector is designed to meet the needs of up to 10Gb/s applications requiring up to 296 signal pins per connector. FCI’s long tradition as a BGA connector innovator assures expertise and reliability in the GIG-ARRAY ® BGA design. FEATURES Ball Grid Array (BGA) termination for process friendly attachment 1mm X 0.65mm BGA grid optimizes routing and electrical performance 100 Ohm differential pair matched impedance assures consistent high speed performance 10 Gb/s differential pair performance supports high speed data rates Polarized design assures proper mating of the connector APPLICATIONS Transmissions, access, switches, optics, networking Servers, storage Industrial controls & equipment Documentation Brochure: connector overview Product Documentation: Gig-Array® Useful links Product Focus: Gig-Array® e-Catalog Mezzanine Connectors GIG-Array ®

24 24 The MEG-Array ® connector is designed to meet the needs of 10Gb/s applications requiring up to 528 signal pins per connector. The combination of multiple stack heights (4mm to 14mm) and multiple sizes (81 signals to 528 signals) allows for optimal design flexibility while yielding less than 1% cross-talk performance when configured differentially. FEATURES Ball Grid Array (BGA) termination for process friendly attachment Stack Heights of 4mm to 14mm Bandwidth of 5Ghz (10Gb/s) for differential pairs Demonstrated solder joint reliability of greater than 22 year (IPC-SM-785) Meets Telcordia GR-1217-CORE and NPS specifications for utilization in telecom applications APPLICATIONS Transmissions, access, switches, optics, networking Servers, storage Industrial controls & equipment Analytical & diagnostic Medical Documentation Brochure: connector overview Product Documentation: Meg-Array® Useful links Product Focus: Meg-Array® E-Catalog Mezzanine Connectors MEG-Array ®

25 5. Input / Output connectors D-Subminiature - Standard D-Subminiature PCB Signal D-Subminiature Cable Signal Connectors & Accessories D-Subminiature Full and mix power Modular Jack Series USB Series + Power Serial ATA (SATA) Series SAS Series DensiShield™ Standard and High Speed Series

26 26 D-Subminiature - Standard The D-Sub connectors are in accordance with the DIN41652 standard and applicable for PCB signal, power and cable connections. FEATURES PCB signal connectors in standard and high density. Cable connectors in standard density. Power: wide range of layouts from 2V2 to 36W4 Available PCb terminations : Solder-to-board, Press-Fit and PIP versions Complies with standard Telecom building practices (IEC and BELLCORE CO GR- 1217) APPLICATIONS Measuring equipment Industrial controller Telecommunication equipments Medical devices Documentation Brochure: Connector Overview Brochure: D-subminiature Pin in Paste Useful links e-Catalog

27 27 D-Subminiature – PCB Signal The Delta D-sub connectors are in accordance with the DIN41652 standard and applicable for PCB signal connections. FEATURES Standard density : Pin-in-Paste Solder-to-board, press-fit and Pin-in-Paste Right angle version – 9 to 37 ways (Europe and US footprints) Straight version – 9 to 50 ways High density Solder-to-board – Right angle socket 15 to 78 ways Press-fit – Straight 62way socket Straight 78 way pin Right angle 78 way socket APPLICATION Measuring equipment Industrial controller Telecommunication Industrial Medical Documentation Brochure: Connector Overview Useful links e-Catalog

28 28 A large choice of connectors and accessories depending on customer applications and needs in terms of robustness and environment. FEATURES Standard application : “economical series” Solder bucket connectors – 9 to 50 ways Plastic hoods, straight and angle exits Demanding application : Vibrating environment : Crimp connectors and contacts– 9 to 50 ways Robust or EMI/RFI functionalities Metalized plastic hood, straight and angle exits Metal hood, straight and angle exits APPLICATIONS Board to cable connections Cable to cable connections D-Subminiature Cable Signal Connectors & Accessories Documentation Brochure: Connector Overview Useful links e-Catalog

29 29 D-Subminiature Full and mix power Documentation Brochure: Connector Overview Useful links e-Catalog A large choice of full or mix power connectors for robust Input/Output connections. FEATURES Standard full and mix power lay-outs Full power : 2V2 (2 contacts, coded), 3W3, 3V3 (3 contacts, coded), 5W5, 8W8 Mix-power : 7W2 (7 contacts of which 2 power), 5W1, 11W1, 21W1, 17W2, 13W3, 9W4, 25W3, 21WA4, 27W2, 47W1, 24W7, 36W4. PCB connectors Straight and right angle versions able to handle 30 or 40 A per power contact. Solder-to-board and press-fit terminations. Cable connectors Pre-inserted signal contacts in solder bucket version Separate solder bucket or crimp power contacts µTCA product range – 48V Single or dual PCB connectors in solder or Pin-in-Paste version Cable connectors and slim hood for dual connections APPLICATIONS Power supply for indoor applications Industrial and Telecom

30 30 Modular Jack Series The Modular Jack connector range can be used to connect telephone sets, data processing systems or any equipment requiring small, versatile interconnection systems. FEATURES Right angle or straight Through mount or SMT Cat3, Cat5 performance category 4, 6, 8 positions, fully or selectively loaded Single to Stacked Multi-ports Inverted latch options Standard, raised or low profile versions Snap or diamond pegs options APPLICATIONS Network servers, hubs, routers Ethernet switches Laptops, modems PBX systems Phone line security systems Telephones ATM machines, Point of sales terminals Medical analysis equipment Documentation Brochure: Connector Overview Useful links e-Catalog

31 31 USB Series + Power The USB + Power interconnect system was developed by FCI to address higher power requirements of devices using USB signaling. USB+Power adds 4 power contacts to the interface providing a total of 5 amps of additional current carrying capability compared to 1 amp for standard USB. FEATURES USB 2.0 compliant, speed to 480 Mb/sec Type A (Host) receptacles, 4 position Through hole and SMT versions PCB mount options: Position, orientation, hold- down. Panel fixing and grounding options Additional sensor contact versions Double deck, 8 position version Type B (peripheral) receptacles, 4 position APPLICATIONS Computers, laptops, servers Printers, external drive units, monitors Digital cameras, TV’s, set-top-box Point-of-sale equipment Documentation Brochure: Connector Overview Useful links e-Catalog

32 32 The 22-position, receptacle and plug connectors enable the implementation of the new high-speed, Serial ATA (SATA) hard disk drive (HDD) interface that is extending the use of low-cost, high capacity SATA drives to low-end enterprise storage applications in servers and storage systems. FEATURES Designed to support differential signaling, initially at speeds of 1.5 Gb/s and evolving to 3.0 Gb/s Connectors meet requirements of Serial ATA Specification 22-position connectors provide 7 contacts for signal port and 15 contacts for power Designed to support hot-plugging and blind-mating of HDDs 7-position signal plugs for internal cable connections APPLICATIONS Notebook and desktop PC’s Servers and storage blades, external storage systems HDD’s and HDD carriers Mezzanine card Embedded system boards Audio and video storage Documentation Brochure: Connector Overview Useful links e-Catalog Serial ATA (SATA) Series

33 33 The 29-position, SAS receptacle and plug connectors enable the implementation of the high-speed, Serial Attached SCSI (SAS) hard disk drive (HDD) interface that is replacing the SCSI drive connection in enterprise storage applications in servers and storage systems. FEATURES 29-position SAS receptacle and plug connectors enable the high-speed, Serial Attached SCSI (SAS) hard disk drive (HDD) interface that is replacing the SCSI initially at speeds of 3 Gb/s and evolving to 6 Gb/s Provide dual signal ports (7 contacts/ port) and 15 contacts for power Designed to support hot-plugging and blind-mating of HDDs Connector retainers provide additional mechanical strength after soldering APPLICATIONS Notebook and desktop PC’s Servers and storage blades, external storage systems HDD’s and HDD carriers Mezzanine card Embedded system boards Audio and video storage SAS Series Documentation Brochure: Connector Overview Useful links e-Catalog

34 34 DensiShield™ Standard and High Speed Series FCI DensiShield™ I/O system is designed to support the transmission of high speed, serial differential signals while taking customer equipment packaging requirements into consideration. FEATURES 8-pair connectors can be mounted side by side on 12.5mm pitch enabling multiple I/O ports along a card edge 4 bi-directional channels working at > 2.5 Gb/s. Robust strain relief with short cable exit enables close spacing between chassis panel and cabinet door or wall Low vertical profile allows use in systems having 15mm pitch card slot spacing Low crosstalk between differential pairs with controlled 100-ohm impedance to match 100-ohm shielded pair cable Crimp ferrule system reliably terminates EMC shield of cable to connector covers Connects EMC shield to chassis panel and provides shielding to PCB level Signal ground is isolated from EMC ground SMT reflow-compatible PCB connector Dual-beam contact system provides redundancy and long term reliability RoHS-compliant APPLICATION Servers and storage systems Switches, routers and base stations Medical, instrumentation and test equipment Documentation Brochure: Connector Overview Product Documentation: DensiShield ™ Useful links e-Catalog

35 6. Power connectors Power Card Edge Connectors PwrBlade® Power Distribution System

36 36 Power Card Edge connectors are a cost-effective system that can be used for DC power output from embedded AC/DC power Supplies or for power distribution between boards within an enclosure. The low profile connector body helps maximize airflow for increased cooling and is well suited for use an 1U rack-mount servers or on power distribution boards inside 1U redundant power supply assemblies. FEATURES One-piece card edge design provides cost-effective power delivery with capacity for up to 7 Amps per power contact at 30°C T-Rise in still air Low profile connector body enables use in 1U servers and power supplies Option for integration of signals and power in a single right-angle connector supports both power control and power distribution Integrated connector design simplifies board assembly Straddle-mount connectors feature mounting ears for secure PCB attachment APPLICATIONS Servers Storage Telecommunication Datacom / Networking Documentation Brochure: Connector Overview Brochure: Power solutions Product Documentation: Power Card Edge Useful links Product Focus: Power Card Edge e-Catalog Power Card Edge Connectors

37 37 The PwrBlade ® Power Distribution System from FCI includes power and signal contacts to provide power distribution and power control in a signal connector. Options for either vertical or right-angle versions of PCB mount headers and receptacles deliver support for coplanar, backplane, mezzanine connections and cable assemblies. FEATURES Provides contacts for power distribution and power control Robust 0.100” (2.54mm) pitch for signal contacts and 0.200”, 0.250”, or 0.300” spacing for power contacts Capability for up to 20 power contacts and 148 signal contacts in up to 8 inches Up to 3 levels of sequential contact: 2 for power and 2 for signals Current Rating 30A per contact with 10 contacts fully energized at 30°C T- Rise in still air 48A per single contact fully energized at 30°C T-Rise in still air UL/CSA listed at 60A per contact with 10 contacts fully energized in still air Board retention devices provided to secure connectors during processing APPLICATIONS Server, storages Uninterruptible power systems (UPS) Fault-tolerant computers Hot-swap redundant N+1 power distribution systems Documentation Brochure: Connector Overview Brochure: Power solutions Brochure: PwrBlade® Useful link Product Focus: PwrBlade® e-Catalog PwrBlade ® Power Distribution System

38 9. Cable Assembly Cable Assembly

39 39 Cable Assembly FCI is a leading supplier of cable assembly interconnect solutions for cable assembly. We offer a wide range of cable products designed to support the transmission of high-speed signals, power as well as fiber optics. Cable assembly portfolio contains the following connectors Densishield™ I/O system Low Profile Subscriber Interface Pwrblade® cable assembly Eyemax™ cable assembly METRAL® cable assembly Pwr Twinblade™ cable assembly Latch-N-Lok™ cable assembly USB Series+Power cable assembly Power D-subminiature cable assembly Fiber optics Features Wide experience and knowledge Dedicated website Custom build Standardized quote request Documentation Brochure: Connector Overview Useful link Product Focus: Cable Assembly e-Catalog

40 10. Media Card System and Sockets Express Card™ Systems PC Card / Header Smart Card

41 41 ExpressCard™ Systems The ExpressCard™ system covers the module card kits and the host connector. FEATURES Meet high-speed electrical requirements as outlined in ExpressCard™ Standard Simple Beam-on –blade contact interface is rated up to 10,000 cycles. Single row, in-line solder tail configuration for easy soldering Longer power and ground contacts on the corresponding module connector provides first-mate and last-disconnect in relation to signal contacts. ExpressCard™ technology will replace Pc Card and CardBus technology in desktop and notebook PCs. APPLICATIONS Wireless and wired cards Storage – SFF optical and magnetic drives Notebooks, portable PCS, industrial PCs, network PCs Set-top boxes, digital TV, home-entertainment devices Security, identity cards and sensors Documentation Brochure: Connector Overview Product Documentation: ExpressCard module connectors and components Product Documentation: ExpressCard Host Connectors and Slots systems Useful links e-Catalog

42 42 The FCI PC Card and header connectors are in accordance with the PCMCIA and Cardbus standard. FEATURES CardBus PC Cards can meet high signal transmission requiring bandwidth (32 bits) and clock rate (33 MHz) Suitable for type I, II, III, 3.3 and 5V Standard and CardBus PC Cards Through Mount, SMT In-Line, SMT Staggered, Flex or patented SMT Vertical Transition Board versions available Optional EMI metal shield cover (CardBus) APPLICATIONS Notebooks, portable PC’s, industrial PC’s, network PC’s Set-top box, digital TV, home entertainment devices Switches, routers, remote access servers Machine control systems Test & measurement devices Medical instrumentation PC Card/Header Documentation Brochure: Connector Overview Useful links e-Catalog

43 43 Smartcard The FCI Smartcard connectors are supplied with a Nickel Hard Surface (NiHS™) which increases the lifetime of the smartcard contact and their resistance to corrosion. FEATURES Through mount, SMT or Flex mounted Sliding or landing contact technology Blade or sealed switch available Vandalism-proof designs Durability: From 10 to cycles Suitable for friendly, harsh, portable or automotive environments EMV, NDS approved SIM, SAM or full size card connectors available APPLICATIONS Analog or digital set-top-box Internet decoder Laptops Mobile and public phones Car radio, GPS, Tachograph Point of sale terminals, E-purse Access control Gas, water, electricity meters Documentation Brochure: Connector Overview Useful links e-Catalog


Download ppt "FCI Product portfolio selection. 1. Backpanel Connectors 1.80 mm (0.071 in.) - ZipLine™ 2.00 mm(0.079 in.) /3.00 mm (0.12 in.) - Airmax VS® 2.00 mm (0.079."

Similar presentations


Ads by Google