Presentation is loading. Please wait.

Presentation is loading. Please wait.

[LAB 1] Getting Start  Introduction  Getting Start  Guiding Materials.

Similar presentations


Presentation on theme: "[LAB 1] Getting Start  Introduction  Getting Start  Guiding Materials."— Presentation transcript:

1 [LAB 1] Getting Start  Introduction  Getting Start  Guiding Materials

2  配件 :  Beagle Bone  USB OTG cable  MicroSD Card  MicroSD Card adaptor BeagleBone Rev A6a

3

4 Getting Start  Connect to PC with Windows7

5 Getting Start  Check Storage device

6 Getting Start  Install the driver: Bone_DRV or Bone_D64  It’s going to pop out an error message  Change the language of system to English.  Change back after installed.

7 Getting Start  Default mode when BeagleBone connect to PC via USB cable is FlashDrive mode.  Switch to Network mode after Driver has been installed by “Eject” function.

8 Getting Start

9

10  Launch Bone101 introduction  Connect to address :80  Launch Cloud9 IDE with Chrome or FireFox  Connect to IP address :3000

11 Getting Start  Bone101

12 Getting Start  Cloud9 IDE

13 Guiding Materials  BeagleBone System Reference Manual  BeagleBone Schematic  

14 Guiding Materials  BeagleBone System Reference Manual

15 Guiding Materials  BeagleBone Schematic

16 Guiding Materials 

17 Guiding Materials 

18 Example 1  Drive LED onBoard USR 2 、 USR 3  Programming in JavaScript  “require (’Bonescript’)” for including Library in need.

19 Example 1  Drive LED onBoard USR 2 、 USR 3  Programming in JavaScript  “require (’Bonescript’)” for including Library in need.

20 Example 1


Download ppt "[LAB 1] Getting Start  Introduction  Getting Start  Guiding Materials."

Similar presentations


Ads by Google