2. Company Profile CFO: Seinosuke Mizuno President: Mr. Akiara Mizuno Established: May, 1973 Location: Tokyo (Head-Quarter) Nagoya Wire Products Addcoat wire Indent wire Alcoat Film Products JB8 / JB7 / JBB02 JBright (HT-C) JFlex (JFC-B)

3. 90% of passenger vehicles use Nippon-Ply Addcoat wires in Japan Productivity is increased. Since Addcoat wire has an effect of shrinkage inhibitors for resin, the annealing process after the production can be skipped. The parts can be shipped immediately. Most effective shrinkage inhibitor for extrusions. In the extrusion process, it helps prevent the molded parts from being distorted due to the effect of anti- shrinkage of plastic resin.

4. Addcoat Wires Products Line-up Wire Size: 0.25mm & 0.40mm Application: ＰＶＣ (AD-R-S) Olefin (AD-O) Synthetic Rubber 《 EPDM 》 (SP AD- EN) Wire type ・ AD ・・ Brass Wire ・ SPAD ・・ Brass Plated Steel Wire

5. Enables to cut the molded parts precisely during the extrusion. Prevent the molded parts from shrinking or expanding. Linear Stabilizer Design Flexibility Cost Reduction Pre-coated for adhesion to olefin, vinyl, and rubber (EPDM) extrusion. Since the coefficient of linear thermal expansion of molded parts is closed to the metal materials, the size of parts can be adjusted for the elasticity of body size Patented

6. Indent Steel Flat Wire with Zincification Indent wire prevents the molded resin parts from shrinking due to the anchor effect of indent. Apply to a variety of resins. Since the coefficient of linear thermal expansion of molded parts is almost the same as the one of the steel, the size of parts can be adjusted for the body size elasticity. Environmentally Friendly

7. Coated both sides of Rigid Aluminum with adhisive ・ PVC Type （ A150W/A72W) ・ Olefin Type （ A150W-O) Shrinkage inhibitor for molded parts Improve the ease of assembling molded parts It is possible to cut the molded parts precisely during the extrusion. To prevent the extrusion molded parts from winding It is possible to produce uniformly molded parts Since the coefficient of linear thermal expansion of molded parts is closed to the metal material, the size of parts can be adjusted for the body size elasticity.

8. New Development Indentwire 47WZ 0.47mm indentwire AD-F-55WZ 0.55mm flat wire with adhesive F-55WZ 0.55mm flat wire with zinc coating SP-AD-70-O 0.70mm Diameter / steel wire w/ adhesive *All samples are available

9. J-Bright Films Market Share in Japan is more than 90 ％ Meets the quality requirement from parts suppliers in Japan. Over 15 years experience in Japanese market Less Steel / Reduce the weight of molded parts Pass Chemical Resistance requirements in Japan Pass Xeon Arc(5000kj) and 2 years outside exposure tests in AZ and FL Since the high resistance stretching PET is used for the top layer, the continuous extrusion feeding is possible. Since the transparent PET is used for the top later, the film can maintain the high gloss appearance. PVC/ Olefin Type Film is available. （ Other resin type will be negotiable ） High Gloss/Matte Finish /Hairline Type is available. Free from the certain Environmental hazardous substances

10. J-Bright Films - Development History JBright (HT-C) Film Many Japanese Parts Suppliers have already used this product The demand from overseas customers are increased. JB7 Improve JBright (HT-C) in terms of flexibility and elasticity Chrome/Matte/Hariline/Black types are developed. Coat Type JB7 Improve the weatherability and MAR resistance by coat layer Replacement of stainless Introduce new film types; matte finish and satin type JB8 /JB8B02 JB8 is used by vacuum forming JB8B02 ---- Gloss 90

11. Target Applications: ProductsApplications HTC-A 150S-RBumper Molding, Side Molding, Belt Molding, Window Upper Molding HTC-A 150S-SBumper Molding, Side Molding, Belt Molding, Window Upper Molding HT-A-RBumper Molding, Side Molding HT-B02Sash Molding, Belt Molding FE-C150T-O Bumper Molding, Side Molding, Flush Mount Molding, Door Edge Molding JBMC150-RRoof Molding, Tire Cover Molding, Belt Molding

12. J-Bright Series / Applications

13. JBright Series Used for LEXUS Model Non-Metallic Solution superior corrosion resistance Environmentally Friendly Back Layer Resin ・ PVC/PP （ Other resin is also negotiable. ） Gloss Type （ HT-C) Black Type （ HT-B)

14. JFlex (JFC-B) Series Hot press can be used Vacuum forming and injection molding Superior transparency of the surface layer providing high-quality brightness, design properties, weather resistance and chemical resistance The backing resin is colored black so that one layer has the function of both coloring and backing, providing a highly-lustrous black sheen. PVC and PP types are available

15. JB7/8 Series (Chrome/Black) BMW / 2011 Mini Countryman / Belt molding Superior scratch resistance Superior weather resistance Superior brightness Superior corrosion resistance Replaceable stainless steel/plating Two types: PVC and PP Superior design properties

16. Film Products Features （ JB7/8 - HTC/JFLEX) Gloss Value JB7/8 (Gloss Type) 459 ～ 461 HT-C (High Gloss Type)449 ～ 456 JFlex (Black) 90 ～ 91 High Gloss Weatherability Anti-Corrosion Environment – JBright does NOT contain Lead, Hexavalent Chromium, Mercury, or Cadmium

17. Nippon Ply Official Distributor in North America Sankyo America, Inc. --- Inventory Stock Point in North America Address: 6101 West 80 th Street, Indianapolis, IN 46278 Phone:317-824-0003 Fax: 317-824-0882 Contact: Yoshiaki Kurihara kurihara@sankyo-america.com Sales Rep in Michigan Jeff Saint Ph: (269) 209-1516 Fax: (269) 841-4076 jeffsaint@mac.com