Presentation is loading. Please wait.

Presentation is loading. Please wait.

Geotechnical properties and stress-strain-time behavior evaluation of industrial waste deposits in Bulgaria by Prof. D-r Eng. Trifon Germanov Department.

Similar presentations


Presentation on theme: "Geotechnical properties and stress-strain-time behavior evaluation of industrial waste deposits in Bulgaria by Prof. D-r Eng. Trifon Germanov Department."— Presentation transcript:

1 Geotechnical properties and stress-strain-time behavior evaluation of industrial waste deposits in Bulgaria by Prof. D-r Eng. Trifon Germanov Department of Geotechnics

2 This report presents the results from some recent studies elaborated under supervision of the author. Part of the results under consideration are reported on the Main Session 1 - “Man Made deposits - recent and ancient” of the13 th European Conference on Soil Mechanics and Geotechnical Engineering, Prague, 2003 This report presents the results from some recent studies elaborated under supervision of the author. Part of the results under consideration are reported on the Main Session 1 - “Man Made deposits - recent and ancient” of the 13 th European Conference on Soil Mechanics and Geotechnical Engineering, Prague, The results presented in this report are published in the Proceedings of the Conference as followed: The results presented in this report are published in the Proceedings of the Conference as followed: Germanov, T. (2003). “Geotechnical properties of industrial waste deposits in Bulgaria”. Proceeding XIII th European conference on SMGE, Prague, Vol.1, pp Germanov, T. (2003). “Geotechnical properties of industrial waste deposits in Bulgaria”. Proceeding XIII th European conference on SMGE, Prague, Vol.1, pp Germanov, T. (2003). “Limit states (Stability, deformation, erosion….)”. Proceeding XIII th European conference on SMGE, Prague, Vol.3, pp Germanov, T. (2003). “Limit states (Stability, deformation, erosion….)”. Proceeding XIII th European conference on SMGE, Prague, Vol.3, pp

3 Basic consideration The stability of waste deposits, such as tailings dam, landfill, waste banks and other depends on the mechanical properties of the waste materials and the shape of the deposit’s body. The stability of waste deposits, such as tailings dam, landfill, waste banks and other depends on the mechanical properties of the waste materials and the shape of the deposit’s body. The basic principles of soil mechanics are usually used for the purpose. On the other hand, the materials included in the waste deposits often have an unusual behavior, different from natural soils. The basic principles of soil mechanics are usually used for the purpose. On the other hand, the materials included in the waste deposits often have an unusual behavior, different from natural soils. This circumstance requires a comprehensive program for laboratory and in situ study for determination of the real mechanical properties of the waste materials This circumstance requires a comprehensive program for laboratory and in situ study for determination of the real mechanical properties of the waste materials Summarizing the problems, related to the stability of waste deposits, the following limit states could be considered: Summarizing the problems, related to the stability of waste deposits, the following limit states could be considered:  slope stability analysis,  bearing capacity,  subgrade settlement and differential surface settlement,  erosion (internal and surface).

4 Basic consideration The slope stability analysisis very important problem, mainly for the tailings dams and landfills, where a slope failure under gravity and filtration efforts is possible. Depending on the type of the project, different design methods are used. If the type of the slip surface is accepted, conventional (based on the Bishop, Jnbu or Spencer principles) methods could be applied. The slope stability analysis is very important problem, mainly for the tailings dams and landfills, where a slope failure under gravity and filtration efforts is possible. Depending on the type of the project, different design methods are used. If the type of the slip surface is accepted, conventional (based on the Bishop, Jnbu or Spencer principles) methods could be applied. Erosion Erosion is important problem in the case of tailings, ash or other dams built up of fine-grained materials where, after raining, a surface slope failure is possible. pore water pressure The most parts of the industrial waste deposits are in water- saturated conditions. By this reason, the effect of the pore water pressure should be taken into account evaluating the deposit stability.

5 Part 1. Geotechnical Properties of some industrial waste deposits in Bulgaria

6 Introduction The design of geotechnical works related to encapsulation and stability analysis of industrial waste deposits requires the determination of real physical and mechanical properties of the waste material. The design of geotechnical works related to encapsulation and stability analysis of industrial waste deposits requires the determination of real physical and mechanical properties of the waste material. The Soil Mechanics principles are usually used for this purpose. The Soil Mechanics principles are usually used for this purpose. However, taking into account the specific features of the waste materials (short time of deposit, usually uniformly grain size distribution, great ability for deformation), some deviations from the standard methods for soils testing are possible. However, taking into account the specific features of the waste materials (short time of deposit, usually uniformly grain size distribution, great ability for deformation), some deviations from the standard methods for soils testing are possible. During the last years an intensive program for construction works related to the environmental protection in Bulgaria has started. During the last years an intensive program for construction works related to the environmental protection in Bulgaria has started.

7 Part of this program is related to designing of equipment with the purpose to encapsulation and remediation of industrial waste deposits. Part of this program is related to designing of equipment with the purpose to encapsulation and remediation of industrial waste deposits. The laboratory of Soil and Rock Mechanics at the University of Architecture, Civil Engineering and Geodesy took part in these programs, mainly conducting laboratory testing for determination of geotechnical properties of waste materials. The laboratory of Soil and Rock Mechanics at the University of Architecture, Civil Engineering and Geodesy took part in these programs, mainly conducting laboratory testing for determination of geotechnical properties of waste materials. Introduction

8 Introduction Only part of the results from laboratory testing is presented in the here. Only part of the results from laboratory testing is presented in the here. Three projects, developed under supervision of the author are considered: Three projects, developed under supervision of the author are considered: Three projects Three projects Encapsulation of “Blue lagoon”; Encapsulation of “Blue lagoon”; Encapsulation of the oxidative pond near the town of Burgas; Encapsulation of the oxidative pond near the town of Burgas; Stability analysis of “Liuliakovitsa” tailings dam. Stability analysis of “Liuliakovitsa” tailings dam. The waste deposits, under consideration, are situated in different part in Bulgaria. The waste deposits, under consideration, are situated in different part in Bulgaria.

9 Encapsulation of “Blue Lagoon” The slime pond (called “Blue Lagoon”) is situated on the territory of the Pirdop Copper Metallurgical Plant located some 70 km to the east of Sofia. Industrial activities on this site started in the late 1950’s. The slime pond (called “Blue Lagoon”) is situated on the territory of the Pirdop Copper Metallurgical Plant located some 70 km to the east of Sofia. Industrial activities on this site started in the late 1950’s.Blue LagoonBlue Lagoon The Blue Lagoon designates the settling pond, which contains the calcium arsenic precipitate (slime) coming from the copper metallurgical plant. The Blue Lagoon designates the settling pond, which contains the calcium arsenic precipitate (slime) coming from the copper metallurgical plant. The northern edge of the Blue Lagoon is rather close to the Sofia- Burgas railway. The northern edge of the Blue Lagoon is rather close to the Sofia- Burgas railway. The initial slime pond was constructed in 1956, mostly on the original sloping (~ 3.5%) ground surface of alluvial soil with a high clay content which is underlain by gneiss bedrock. The initial slime pond was constructed in 1956, mostly on the original sloping (~ 3.5%) ground surface of alluvial soil with a high clay content which is underlain by gneiss bedrock. The elevation of the bedrock surface is variable. The elevation of the bedrock surface is variable.

10 Drill holes advanced to either establish the depth to be more than 20 m below the ground surface. Drill holes advanced to either establish the depth to be more than 20 m below the ground surface. The slime surface has an area of about 9.6 ha and the greatest depth, in 1997 was m below the slime surface. The slime surface has an area of about 9.6 ha and the greatest depth, in 1997 was m below the slime surface. The estimated total volume of the stored sediments (slime) was about m 3. The estimated total volume of the stored sediments (slime) was about m 3. Encapsulation of “Blue Lagoon”

11 Encapsulation of the oxidative pond near Burgas The oxidative pond is situated near the quarter “Meden Rudnik” (Cooper mine) in the town of Burgas. The oxidative pond is situated near the quarter “Meden Rudnik” (Cooper mine) in the town of Burgas.oxidative pond oxidative pond To the west the pond is bounded by “Mandra” dam. At first, the pond had been used as a settling basin for water supply. To the west the pond is bounded by “Mandra” dam. At first, the pond had been used as a settling basin for water supply. During 1984 it was taken out from the scheme of the water treatment and had been used as a site for deposit of floating refuse products from cleaning of the other oxidative ponds. During 1984 it was taken out from the scheme of the water treatment and had been used as a site for deposit of floating refuse products from cleaning of the other oxidative ponds. During 1991 the free filling of the pond by mixture of constructions refuses, sediments and ash from the ovens for burning of petroleum and biological sediments began. As a result of this, an area of 298 ha was filled. During 1991 the free filling of the pond by mixture of constructions refuses, sediments and ash from the ovens for burning of petroleum and biological sediments began. As a result of this, an area of 298 ha was filled. Thus, the oxidative pond was formed of three parts: filled body (swamp), settled lake, and slime field. Thus, the oxidative pond was formed of three parts: filled body (swamp), settled lake, and slime field.

12 “Liuliakovitsa” tailings dam stability analysis The tailings dam “Liuliakovitsa” is a part of the Assarel cooper flotation plant, designed with an improved construction. The tailings dam “Liuliakovitsa” is a part of the Assarel cooper flotation plant, designed with an improved construction. Its final height will be 190 m. The starter dam, built of draining rock fill, has a tongue-shaped projecting lower upstream part. The length of this part is equal to the distance from the starter dam to the decant pond at the initial stage. It is calculated to ensure stability of the tailings dam at its final height. Its final height will be 190 m. The starter dam, built of draining rock fill, has a tongue-shaped projecting lower upstream part. The length of this part is equal to the distance from the starter dam to the decant pond at the initial stage. It is calculated to ensure stability of the tailings dam at its final height. The coarser fractions are laid off in the supporting part over the tongue, and the finer material is washed off into the pond. The coarser fractions are laid off in the supporting part over the tongue, and the finer material is washed off into the pond. This kind of sorting makes it possible to use the good strength of the coarse tailings deposited over the tong, as a substitute of the rockfill. This kind of sorting makes it possible to use the good strength of the coarse tailings deposited over the tong, as a substitute of the rockfill.

13 The construction of the starter dam began late in 1984, and the deposition of the tailings started in The construction of the starter dam began late in 1984, and the deposition of the tailings started in Preliminary study for determination of consolidation characteristics of the tailings, obtained in laboratory, was carried out in Preliminary study for determination of consolidation characteristics of the tailings, obtained in laboratory, was carried out in Nowadays, the height of tailings dam reaches to 130 m Nowadays, the height of tailings dam reaches to 130 m Thus, supporting starter dam of rockfill with a lower-than-usual height is used. Thus, supporting starter dam of rockfill with a lower-than-usual height is used. “Liuliakovitsa” tailings dam stability analysis

14 Methodology of the laboratory testing Waste materials sampling Waste materials sampling The aim of sampling is to obtain samples for identification of the waste materials as well as to perform laboratory testing for determination of the geotechnical properties. The aim of sampling is to obtain samples for identification of the waste materials as well as to perform laboratory testing for determination of the geotechnical properties. The techniques used for sampling depend on the in-situ conditions of the settled waste materials. The techniques used for sampling depend on the in-situ conditions of the settled waste materials. Different methods for sampling are applied. Different methods for sampling are applied. The drilling works in the Blue Lagoon were done according to preliminary elaborated pattern of borehole net, consisting of 32 drillings, with dimensions of gird 50m to 50 m. The drilling works in the Blue Lagoon were done according to preliminary elaborated pattern of borehole net, consisting of 32 drillings, with dimensions of gird 50m to 50 m.Blue Lagoon Blue Lagoon A floating caisson/pontoon was used. A floating caisson/pontoon was used. Sampling was done through an opening in the center of the pontoon by means of a pipe-drilling device of 2.5 inches, internal diameter, with jointed sections of 100 cm each. Sampling was done through an opening in the center of the pontoon by means of a pipe-drilling device of 2.5 inches, internal diameter, with jointed sections of 100 cm each.

15 Waste materials sampling During the process a total of 220 m have been drilled and 225 samples were taken. During the process a total of 220 m have been drilled and 225 samples were taken. The samples for laboratory study were delivered in liquid condition using plastic bottles. The samples for laboratory study were delivered in liquid condition using plastic bottles. Before the beginning of the official program of laboratory geotechnical study, several methodological compression tests were carried out. Before the beginning of the official program of laboratory geotechnical study, several methodological compression tests were carried out. has been applied for sampling of the refuse materials from the oxidative pond. A similar methodology has been applied for sampling of the refuse materials from the oxidative pond.

16 Preliminary methodological compression tests of the slime from “Blue Lagoon” Two bottles with slime, taken from 0,5m and 4,5m depth were used for the purpose. Both samples have approximately uniform initial density and water content. Two bottles with slime, taken from 0,5m and 4,5m depth were used for the purpose. Both samples have approximately uniform initial density and water content. The following initial characteristics for the sample from 4,5m depth are determined: The following initial characteristics for the sample from 4,5m depth are determined:  water content W n0 =205,6%;  wet density  n0 =1,185 g/cm 3 ;  dry density  d0 =0,397 g/cm 3 ;  void ratio e 0 =5,73; degree of saturation S r =1,00. degree of saturation S r =1,00.

17 Initial identification characteristics of the refused materials form the oxidative pond The refuse materials have a large quantity of petroleum products. The refuse materials have a large quantity of petroleum products. To decrease the effect of these products on the geotechnical properties, a special procedure was applied. To decrease the effect of these products on the geotechnical properties, a special procedure was applied. At first, the refuse materials have been laid on a filter paper and rest one day to free drying. At first, the refuse materials have been laid on a filter paper and rest one day to free drying. After drying in the oven at a temperature of С 0 and after free settling, the refuse materials showed approximately 70% soil particles and 30% organic contents. After drying in the oven at a temperature of С 0 and after free settling, the refuse materials showed approximately 70% soil particles and 30% organic contents.

18 The identification geotechnical characteristics in “natural conditions” are evaluated according to standard methods as follows: The identification geotechnical characteristics in “natural conditions” are evaluated according to standard methods as follows: the bulk density in by means of direct filling of the refuse materials in the oedometers; the water content - drying the samples at a temperature of С 0 ; the bulk density in by means of direct filling of the refuse materials in the oedometers; the water content - drying the samples at a temperature of С 0 ; grain size distribution – by sieve and areometric analysis. grain size distribution – by sieve and areometric analysis. The average characteristics are given in Table 1. The average characteristics are given in Table 1.Table 1Table 1 Initial identification characteristics of the refused materials form the oxidative pond

19 Basic physical characteristics of the refuse materials from the oxidative pond oxidative pondoxidative pond

20 Basic physical characteristics of tailings materials tailings materialstailings materials

21 Determination of the mechanical properties Oedometric tests Oedometric tests Two types of oedometer have been used for compression tests: Two types of oedometer have been used for compression tests:  Oedometer without friction along the circular area of the sample for long term consolidation tests with one side vertical drainage. without friction without friction  ELE Rowe type consolidation cells for compression tests with radial inwards drainage The oedometric tests of the tailings were carried out directly by using undisturbed samples. The oedometric tests of the tailings were carried out directly by using undisturbed samples.

22 Oedometric tests - “Blue Lagoon” Taking into account that it is impossible to take undisturbed samples of the slime and refused material from pond “Blue Lagoon” and “Oxidative pond” and after the conclusion that there is not great variation of the unit weight with depth, a non-standard procedure was applied for preparation of samples for all oedometric tests.Blue LagoonOxidative pond According to the approximate evaluation of density of samples, measuring the cell volume, the required mass of the natural slime and refused materials (mixture from 3-4 bottles) was measured. This mass is put into the cell, compacted uniformly, on layers

23 Oedometric tests - results Time - deformation properties are determined by using time- deformation curves in “log scale” mainly. The coefficients of consolidation C v are computed applying Casagrande’s method. Time - deformation properties are determined by using time- deformation curves in “log scale” mainly. The coefficients of consolidation C v are computed applying Casagrande’s method. The creep indexes C ae (coefficients of secondary consolidation) are computed by using formula: The creep indexes C ae (coefficients of secondary consolidation) are computed by using formula: C ae = (1 + e 0 )e a, where: e 0 - initial void ration; e a - coefficient of secondary compression. C ae = (1 + e 0 )e a, where: e 0 - initial void ration; e a - coefficient of secondary compression. Initial times of creeping, t 0, are computed from the log-time- settlement curves. Initial times of creeping, t 0, are computed from the log-time- settlement curves. The coefficients of radial consolidation C ri are computed by using square-root time curves according to BS The coefficients of radial consolidation C ri are computed by using square-root time curves according to BS The average compression and consolidation characteristics are presented in Table 3. The average compression and consolidation characteristics are presented in Table 3.Table 3Table 3

24 Triaxial tests - results Triaxial shear tests were carried out only with slimes and tailings samples. Triaxial shear tests were carried out only with slimes and tailings samples. The following types of triaxial shear tests are performed: undrained-unconsolidated (UU) and consolidated undrained (CU) tests, with pore pressure measurement. The following types of triaxial shear tests are performed: undrained-unconsolidated (UU) and consolidated undrained (CU) tests, with pore pressure measurement. After preparation of the specimen, each triaxial shear test is carried out following the standard procedures according to standards (ASTM D and NF P , October 1994). Each shear strength parameter is determined using four Mohr circles. After preparation of the specimen, each triaxial shear test is carried out following the standard procedures according to standards (ASTM D and NF P , October 1994). Each shear strength parameter is determined using four Mohr circles. The results from UU and CU tests are presented by following relationships: deviator stress-axial strain, pore pressure increment – axial strain and relations t = f(s) and t’ = f(s’) [t’=(  1 -  3 )/2; s=(  1 +  3 )/2; s’=(  ' 1 +  ' 3 )/2]. Average results from triaxial shear tests are presented in Table 3. The results from UU and CU tests are presented by following relationships: deviator stress-axial strain, pore pressure increment – axial strain and relations t = f(s) and t’ = f(s’) [t’=(  1 -  3 )/2; s=(  1 +  3 )/2; s’=(  ' 1 +  ' 3 )/2]. Average results from triaxial shear tests are presented in Table 3.Table 3Table 3

25 Basic deformation and strength characteristics

26 Part 2. Stress-strain-time behavior evaluation

27 The effect of the pore water pressure on the stress-strain behavior

28 Basic constitutive equations for the pore water pressure evaluation Following Germanov (2000), the massifs of saturated waste materials could be considered as multi-phase medium and their stress-strain behavior being accompanied by two simultaneous, rheological processes: filtration and creeping. Following Germanov (2000), the massifs of saturated waste materials could be considered as multi-phase medium and their stress-strain behavior being accompanied by two simultaneous, rheological processes: filtration and creeping. It is assumed that the deformation of the soil skeleton could be presented according to the theory of linear creep by the equation: It is assumed that the deformation of the soil skeleton could be presented according to the theory of linear creep by the equation: where: e 0 and e(t) are the initial and variable over time void ratios;  (t) is the sum of normal effective stresses at a fixed point of the soil massifs; K 0 is the coefficient of the lateral pressure at rest; m v (t,  ) is the generalized coefficient of volume strain.

29 Basic constitutive equations for the pore water pressure evaluation m 0 (  ) is the coefficient of instantaneous strain (linear compressibility);  (  ) is the function of ageing (tixotropic strengthening) of the soil skeleton  (  ) is the function of ageing (tixotropic strengthening) of the soil skeleton. m l is the coefficient of volume creep strain (secondary compression);  - the parameter of creeping speed; m h - the coefficient of "ageing" strain of the soil skeleton;  1 - the parameter of the soil skeleton age (the previous stressed condition). The methods for determining the coefficients of volume strains and the creep parameters are developed by theauthor (see Germanov 2000). The methods for determining the coefficients of volume strains and the creep parameters are developed by the author (see Germanov 2000).

30 Basic constitutive equations for the pore water pressure evaluation Assuming that the fluid filtration is according to Darcy's law, the function u w (t,x,y) for two-dimensional consolidation, is determined by the solution of the following differential equation: Assuming that the fluid filtration is according to Darcy's law, the function u w (t,x,y) for two-dimensional consolidation, is determined by the solution of the following differential equation: where:  1 (t) =  y (t) +  z (t);  y (t) and  z (t) are the total normal stresses which would be accepted: constant, when the period of operation is considered; variation with a constant velocity for the construction period; variation under cyclic loads (machine foundations or earthquake motions).

31 The other coefficients and functions depend on the soil properties. The other coefficients and functions depend on the soil properties. The author has received an exact solution of the one-dimensional consolidation, under corresponding initials and boundaries conditions, according to equation (Germanov, 1988). Using the finite element method, the two- dimensional consolidation has been solved (Germanov, 2000). The author has received an exact solution of the one-dimensional consolidation, under corresponding initials and boundaries conditions, according to equation (Germanov, 1988). Using the finite element method, the two- dimensional consolidation has been solved (Germanov, 2000). Basic constitutive equations for the pore water pressure evaluation

32 Liquefaction potential evaluation of a tailings dam

33 The increasing of the pore water pressure under static and dynamic (seismic) excitation loads may lead to decrease the effective stresses to zero. The increasing of the pore water pressure under static and dynamic (seismic) excitation loads may lead to decrease the effective stresses to zero. This phenomenon, known as liquefaction, may provoke a loss of the bearing capacity and failure of the soil massifs. This phenomenon, known as liquefaction, may provoke a loss of the bearing capacity and failure of the soil massifs. Evaluation of the exceed pore water pressure under static loading is performed by using the solutions developed by the author (Germanov, 2000), based on the theory of the two-dimensional consolidation, taking into account the rheological properties of the materials. Evaluation of the exceed pore water pressure under static loading is performed by using the solutions developed by the author (Germanov, 2000), based on the theory of the two-dimensional consolidation, taking into account the rheological properties of the materials.

34 Liquefaction potential evaluation of a tailings dam Liquefaction is a phenomenon in which the strength and stiffness of a soil is reduced by earthquake shaking or other rapid loading. Liquefaction is a phenomenon in which the strength and stiffness of a soil is reduced by earthquake shaking or other rapid loading. The phenomenon is only generally considered for sandy soils and usually for loose sands. The phenomenon is only generally considered for sandy soils and usually for loose sands. However, the increase of the pore pressure could reduce the effective pressure, not only in fine-grained soils and coarse- grained soils. However, the increase of the pore pressure could reduce the effective pressure, not only in fine-grained soils and coarse- grained soils. It was established that clay or silt with low plasticity index, such as tailings material, has been found to be as vulnerable to liquefaction (Ishihara, 1985). It was established that clay or silt with low plasticity index, such as tailings material, has been found to be as vulnerable to liquefaction (Ishihara, 1985). One of the criteria for liquefaction potential evaluation is the grain size distribution. One of the criteria for liquefaction potential evaluation is the grain size distribution. The results of the laboratory investigation of the tailings materials from “Liuliakowitsa” tailings dam shows that the investigated tailings could be classified as fine silty sand. The results of the laboratory investigation of the tailings materials from “Liuliakowitsa” tailings dam shows that the investigated tailings could be classified as fine silty sand.

35 The representative grain-size distribution curves are shown below. It can be seen that the grain size curves belong to the boundaries of the most liquefable soils (Ishihara, 1985). This means that in some conditions, tailings could reach to a state of liquefaction.

36 Liquefaction potential evaluation of a tailings dam An approximate method based on theoretical evaluation of the increase of pore water pressure in tailings dam’s body during an earthquake is applied herein. An approximate method based on theoretical evaluation of the increase of pore water pressure in tailings dam’s body during an earthquake is applied herein. Following Martin & Seed (1978), the basic assumption for pore pressure generation and dissipation analysis is that the excess pore water pressure, u w, in a soil element, could be presented as the sum of the pore water pressure under static loading, u w,st, and pore water pressure increment generated under dynamic excitation - u w,d. Following Martin & Seed (1978), the basic assumption for pore pressure generation and dissipation analysis is that the excess pore water pressure, u w, in a soil element, could be presented as the sum of the pore water pressure under static loading, u w,st, and pore water pressure increment generated under dynamic excitation - u w,d. The static pore water pressure u w,st could be computed by using a computer program, developed by the author (Germanov, 2000) based on the constitutive equations given in the paper. The static pore water pressure u w,st could be computed by using a computer program, developed by the author (Germanov, 2000) based on the constitutive equations given in the paper.

37 The computations are performed, applying nonlinear experimental relations of the physical and consolidation characteristics and expressing their variation with the dam height. The computations are performed, applying nonlinear experimental relations of the physical and consolidation characteristics and expressing their variation with the dam height.nonlinear experimental relations nonlinear experimental relations A cross section of the tailings dam and in situ measured pore water pressure are presented below (Kalchev, 2003). A cross section of the tailings dam and in situ measured pore water pressure are presented below (Kalchev, 2003). The computations for static conditions show that there are no differences between theoretical and in-situ measured values of the pore water pressure. The computations for static conditions show that there are no differences between theoretical and in-situ measured values of the pore water pressure.

38 Nonlinear linear characteristics of tailings dam for static analysis

39 Liquefaction potential evaluation of a tailings dam The dynamic pore water pressure (u w,d ) is computed, considering the tailings dam, under cycling loading, in undrained conditions, by using the expression (Martin & Seed 1978): The dynamic pore water pressure (u w,d ) is computed, considering the tailings dam, under cycling loading, in undrained conditions, by using the expression (Martin & Seed 1978): where:  ' 0 is the effective overburden pressure; N – the number of uniform stress cycles undergone by the soil element; N l – the number of cycles at the same levels required to reach initial liquefaction.

40 Liquefaction potential evaluation of a tailings dam The number of cycles are accepted: N = 12 for an earthquake with magnitude equal to 7; N l =50, according to Germanov & Kostov (1994). The distribution of the pore water pressure at the dam height is presented below. The maximum value of pore pressure ratio u w /  ' 0 reaches to 0.8. It is obviously, under the stress strain conditions, that there is no area in tailings dam, which would be susceptible to liquefaction. u w,st u w,d

41 Evaluation of the ultimate stress- strain state of the slime pond before encapsulation

42 Situation of the “Blue Lagoon” before Encapsulation

43 Evaluation of the ultimate stress strain state of the slime pond during encapsulation One of the variants of the project for encapsulation of the slime pond “Blue Lagoon” considers establishment of drainage wells and filling the pond with granular materials as well as construction of embankment 8 m high. One of the variants of the project for encapsulation of the slime pond “Blue Lagoon” considers establishment of drainage wells and filling the pond with granular materials as well as construction of embankment 8 m high. Another variant without vertical drainage is considered as well. It is supposed that after dewatering the filling will be made approximate by constant speed. Another variant without vertical drainage is considered as well. It is supposed that after dewatering the filling will be made approximate by constant speed. For evaluation of ultimate stress-strain state the Mohr-Coulomb equation for ultimate equilibrium could be used (Germanov, 1986, 2000). For evaluation of ultimate stress-strain state the Mohr-Coulomb equation for ultimate equilibrium could be used (Germanov, 1986, 2000). Considering the slime pond in unconsolidated conditions under embankment’s loads, the dimensions of the so-called "plastic zones" could be evaluated by using the expression: Considering the slime pond in unconsolidated conditions under embankment’s loads, the dimensions of the so-called "plastic zones" could be evaluated by using the expression:

44 Evaluation of the ultimate stress strain state of the slime pond during encapsulation where,  z,  y and  zy, are effective normal and tangential stresses in a given point of the slime pond. The zones of ultimate equilibrium are defined by the condition  cr >  ' (  '- effective angle of internal friction). If these zones are relatively large, the subgrade (slime pond) will lost its overall stability. A computer program for ultimate stress-strain behavior evaluation of saturated soil massifs, taking into account of the pore water pressure generation and dissipation during construction and operation has been developed by the author (Germanov, 1986).

45 Evaluation of the ultimate stress strain state of the slime pond during encapsulation Some results from computations are given in Table 4. Two loading steps are considered: q=80 kPa and q=160kPa, corresponding to 4.0 m and 8.0 m embankment fill respectively. All computations are performed by using input data (geotechnical characteristics), according to Germanov (2003). Some results from computations are given in Table 4. Two loading steps are considered: q=80 kPa and q=160kPa, corresponding to 4.0 m and 8.0 m embankment fill respectively. All computations are performed by using input data (geotechnical characteristics), according to Germanov (2003). Table 4.  cr values for different depts Table 4.  cr values for different depts. For this case (  '   ),the plastic zone could be formed to 6.0m depth at the final stage of loading. For this case (  '   ), the plastic zone could be formed to 6.0m depth at the final stage of loading.

46 Determination of the time- depending settlement of the Oxidative pond

47 The first stage of the project for encapsulation and remediation of the oxidative pond near the town of Burgas, proposes a filling the pond by granular material over geotextile. The first stage of the project for encapsulation and remediation of the oxidative pond near the town of Burgas, proposes a filling the pond by granular material over geotextile. The results of the consolidation tests (Germanov, 2003) show some specific features of the petroleum refuses which considerably distinguish them from natural soils. The results of the consolidation tests (Germanov, 2003) show some specific features of the petroleum refuses which considerably distinguish them from natural soils. First of all, the test results show a very low value of densities and very large porosity (  n  1.0 g/cm 3 ; e = 8.0  10.0). First of all, the test results show a very low value of densities and very large porosity (  n  1.0 g/cm 3 ; e = 8.0  10.0). Water content reaches 500 – 600%. Water content reaches 500 – 600%. On the other hand, during the consolidation tests, the settlements are developing very slowly over time under small loading. On the other hand, during the consolidation tests, the settlements are developing very slowly over time under small loading. The great part of the secondary consolidation presumes the presence of rheological processes. The great part of the secondary consolidation presumes the presence of rheological processes.

48 In order то receive a preliminary prognosis of time- depending settlement, a computation was performed for the subgrade (i.e. petroleum refuses) under loading from embankment 2.0m high. In order то receive a preliminary prognosis of time- depending settlement, a computation was performed for the subgrade (i.e. petroleum refuses) under loading from embankment 2.0m high. It is accepted that the construction works (time of filling) will last six months. It is accepted that the construction works (time of filling) will last six months. The degree of consolidation at the end of construction period and during “operation” after one, two and five years is computed. The degree of consolidation at the end of construction period and during “operation” after one, two and five years is computed. Determination of the time-depending settlement of the Oxidative pond

49 Situation of the oxidative pond, slime field and swamp

50 Time-depending settlement of the Oxidative pond Table 5. Final settlement and degree of consolidation

51 Determination of the time-depending settlement of the oxidative pond The results presented in Table 5 show a low value of the degree of consolidation at the end of filling. The results presented in Table 5 show a low value of the degree of consolidation at the end of filling.Table 5Table 5 With respect to the homogeneous composition of the petroleum refuses, the computations showed an approximately equal degree of consolidation at the end of the different periods. With respect to the homogeneous composition of the petroleum refuses, the computations showed an approximately equal degree of consolidation at the end of the different periods. An increase of the degree of consolidation could be reached by increasing the construction period (time of filling). An increase of the degree of consolidation could be reached by increasing the construction period (time of filling). On the other hand, under this loading, in spite of the low values of the deformation modulus, the final settlements are comparatively small – from 25cm to 78 cm. On the other hand, under this loading, in spite of the low values of the deformation modulus, the final settlements are comparatively small – from 25cm to 78 cm.

52 Increasing the final settlements could be possible by means of additional loads, which, after reaching the predicted settlement, should be removed. Increasing the final settlements could be possible by means of additional loads, which, after reaching the predicted settlement, should be removed. The great value of water content supposed compression under static loading only. The great value of water content supposed compression under static loading only. The influence of the dynamic loading (for example vibrations) on such type of refuse materials needs an additional study. The influence of the dynamic loading (for example vibrations) on such type of refuse materials needs an additional study. Determination of the time-depending settlement of the oxidative pond

53 Conclusion The results presented in the presentation underline the considerable influence of the pore water pressure on the stress-strain behavior of waste deposits which reached a limit state. The results presented in the presentation underline the considerable influence of the pore water pressure on the stress-strain behavior of waste deposits which reached a limit state. Besides the conventional methods for stability analysis of the saturated waste deposits, additional analyse, such as liquefaction, bearing capacity and time depending settlements should be made. Besides the conventional methods for stability analysis of the saturated waste deposits, additional analyse, such as liquefaction, bearing capacity and time depending settlements should be made.

54 References Germanov, T.(1988). Creep and ageing effects on stresses and deformations of saturated clayey soils”. Proc. Int. conf. on rheology and soil mechanics, Coventry, pp Germanov, T.(1988). Creep and ageing effects on stresses and deformations of saturated clayey soils”. Proc. Int. conf. on rheology and soil mechanics, Coventry, pp Kaltchev (1998). Instrumentation system for Assarel Tailings dam. Proc. Green 2. Krakow, pp Kaltchev (1998). Instrumentation system for Assarel Tailings dam. Proc. Green 2. Krakow, pp Abadjiev, Germanov, Markov. (1987).Determination of tailings consolidation for a high spigotted tailings dam. Proc. 9 th ECSMGE, Dublin, vol.4.1, pp Abadjiev, Germanov, Markov. (1987).Determination of tailings consolidation for a high spigotted tailings dam. Proc. 9 th ECSMGE, Dublin, vol.4.1, pp Germanov,T. (1986). Special problems in analyzing embankments). Proc.8-th Danube-European Conference on SMFE, Bericht zu Sitzung E, Nurnberg, vol.II, pp Germanov,T. (1986). Special problems in analyzing embankments). Proc.8-th Danube-European Conference on SMFE, Bericht zu Sitzung E, Nurnberg, vol.II, pp Germanov, T.(1988). Creep and ageing effects on stresses and deformations of saturated clayey soils”. Proc. Int. conf. on rheology and soil mechanics, Coventry, pp Germanov, T.(1988). Creep and ageing effects on stresses and deformations of saturated clayey soils”. Proc. Int. conf. on rheology and soil mechanics, Coventry, pp Germanov, T. & V.Kostov (1994). Determination of Tailings Properties for Seismic Response Analysis of a Tailings Dam. Proc., 1 st International Conference on Environmental Geotechnics, Edmonton, pp Germanov, T. & V.Kostov (1994). Determination of Tailings Properties for Seismic Response Analysis of a Tailings Dam. Proc., 1 st International Conference on Environmental Geotechnics, Edmonton, pp

55 References Germanov, T. (2000). Effect of the Pore Water Pressure on the Stress- Strain behavior of Earth Dams. Proc. of the GEOTECH - Year 2000 Development in Geotechnical Engineering, AIT, Bangkok, pp Germanov, T. (2000). Effect of the Pore Water Pressure on the Stress- Strain behavior of Earth Dams. Proc. of the GEOTECH - Year 2000 Development in Geotechnical Engineering, AIT, Bangkok, pp Isihara, K. (1985). Stability of natural deposits during earthquakes; Proc. 11 th International Conf. On SMFE, San Francisco, Vol 2, pp Isihara, K. (1985). Stability of natural deposits during earthquakes; Proc. 11 th International Conf. On SMFE, San Francisco, Vol 2, pp Jessberger, H.L. & R. Kockel (1995). Determination and assessment of the mechanical properties of waste. Proc. Symposium Green 93,.Balkema, pp.313 – 322. Jessberger, H.L. & R. Kockel (1995). Determination and assessment of the mechanical properties of waste. Proc. Symposium Green 93,.Balkema, pp.313 – 322. Kaltchev I.(2003). Investigation and testing of pore pressure, phreatic surface location and hydrodynamic pressure in “Asarel – Medet” tailings dam. Proc. 13 th ECSMGE, Prague. Kaltchev I.(2003). Investigation and testing of pore pressure, phreatic surface location and hydrodynamic pressure in “Asarel – Medet” tailings dam. Proc. 13 th ECSMGE, Prague. Martin P., H.B.Seed (1978. Apollo, a computer program for the analysis of pressure generation and dissipation on horizontal sand layers during cyclic or earthquake loading.. UCB/EEC-78/21 Martin P., H.B.Seed (1978. Apollo, a computer program for the analysis of pressure generation and dissipation on horizontal sand layers during cyclic or earthquake loading.. UCB/EEC-78/21 Vanicek, I. (1998). Talings dams for flying ash – some experiences gained in CR. Proc. 3 th International Conference on environmental geotechnics, Lisbon. Vanicek, I. (1998). Talings dams for flying ash – some experiences gained in CR. Proc. 3 th International Conference on environmental geotechnics, Lisbon.

56 Situation of the projects “Liuliakovitsa” tailings dam Blue Lagoon Oxidativepond

57 View of the slime pond “Blue Lagoon” before encapsulation

58 Overview of all oxidative ponds near Burgas

59 A borehole net consisting of 40 drillings, was elaborated for sampling from tailings dam. By using a standard drive sampling method, more than 50 undisturbed samples were taken at different depths through 5 m. A representative sample is shown below. A borehole net consisting of 40 drillings, was elaborated for sampling from tailings dam. By using a standard drive sampling method, more than 50 undisturbed samples were taken at different depths through 5 m. A representative sample is shown below. Sampling of Tailings Materials

60 Oedometric tests apparatus

61 Oedometric tests - “Blue Lagoon”

62 Oedometric tests - “Oxidative pond”


Download ppt "Geotechnical properties and stress-strain-time behavior evaluation of industrial waste deposits in Bulgaria by Prof. D-r Eng. Trifon Germanov Department."

Similar presentations


Ads by Google