We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byChasity Mance
Modified about 1 year ago
NOVA Extrusion Test Results ─ Prototype Test Device
NOVA Extrusion Test Results ─ Test Device Gasket Detail Fill Holes for Cells Test Sample Holes for 1/2” All-thread Rod
NOVA Extrusion Test Results ─
Types of Failures
NOVA Extrusion Test Results ─ Types of Failures Side Wall
NOVA Extrusion Test Results ─ Types of Failures Side Wall Root
NOVA Extrusion Test Results ─ Types of Failures Side Wall Root Web
NOVA Extrusion Test Results ─ Types of Failures Side Wall Root Web Combination
NOVA Extrusion Test Results ─ ►Sample 1. ●Material: Nova 27 ●Failure pressure: 180 psi ●Failure type: Side wall
NOVA Extrusion Test Results ─ ►Sample 2. ●Material: Nova 27 ●Failure pressure: 100 psi ●Failure type: Root and side wall
NOVA Extrusion Test Results ─ ►Sample 3. ●Material: Nova 27 ●Failure pressure: 130 psi ●Failure type: Root and side wall
NOVA Extrusion Test Results ─ ►Sample 4. ●Material: Nova 27 ●Failure pressure: 110 psi ●Failure type: Root and side wall
NOVA Extrusion Test Results ─ ►Sample 5. ●Material: Nova 27 ●Failure pressure: 160 psi ●Failure type:Side wall
NOVA Extrusion Test Results ─ ►Sample 6. ●Material: Nova 27 ●Failure pressure: 160 psi ●Failure type:Root and side wall
NOVA Extrusion Test Results ─ ►Sample 7. ●Material: Nova 22 ●Failure pressure: 45 psi ●Failure type:Root
NOVA Extrusion Test Results ─ ►Sample 8. ●Material: 1085/1029A ●Failure pressure: 185 psi ●Failure type:Web
NOVA Extrusion Test Results ─ ►Sample 9. ●Material: 1085/1029A ●Failure pressure: 200 psi ●Failure type: Web
NOVA Extrusion Test Results ─ ►Sample 10. ●Material: Nova 19 ●Failure pressure: 60 psi ●Failure type:Root
NOVA Extrusion Test Results ─ ►Sample 11. ●Material: Nova 19 ●Failure pressure: 85 psi ●Failure type:Root
RPVC Extrusion Test Results ─ Lee and Jostlein, 2005
NOVA Extrusion Test Results ─ Next phase:
NOVA Extrusion Test Results ─ Next phase: ● Completion of a hazard analysis.
NOVA Extrusion Test Results ─ Next phase: ● Completion of a hazard analysis. ● Construction of a more efficient test device.
NOVA Extrusion Test Results ─
Next phase: ● Completion of a hazard analysis. ● Construction of a more efficient test device. ● Testing more samples.
Grouts and Grout tests for NOVA The NOVA extrusions, when filled, will exert an average pressure of 19 psi (2736 psf) on the floor. The pressure is not.
Phase Difference = Phase Difference = 0.05.
PVC Extrusion Quality Control WBS 2.4.2,2.4.3 June 5, 2007 Chuck Grozis.
Mechanical Tests on Structure Mechanical Tests are being started using real extrusions. Purpose of the tests are to evaluate the accuracy and validity.
Epoxy for Microboone Cradle Attachment The Microboone detector tank will be supported by two cradles, made from dense poly-urethane (PU) foam. The cradles.
Tendency of water to favor one side more than another. Predicts which way water diffuses in PLANT tissues using the Greek letter Psi. (Ψ) Plants use water.
Status Report #2 Walking Charger By: Carlos Benitez, Meryem Fennich, Srinath Kota, Jacksario Rosario September 15 st 2010 Description: Battery charger.
Mechanical AST5300 is a wet / wet differential pressure transmitter Compatible with liquids or gases on both the high pressure and low pressure process.
Hydraulic Motors. Objectives 1. Explain the difference in a motor and a pump. 2.Explain the difference in a fixed displacement and a variable displacement.
AFC Module Meeting Friday - May 21, 2004 Report on the Window burst test Edgar Black IIT.
Status Report #3 Walking Charger By: Carlos Benitez, Meryem Fennich, Srinath Kota, Jackseario Rosario September 22 st 2010 Description: Battery charger.
Alternative Energy Cell Phone Charger Team #6: Jack Boylan Jake Kapoosuzian Rahul George Pennsylvania State University EDSGN 100.
Typical phases of a project: 1.Schematic Design 2.Design Development 3.Construction Documents 4.Construction Administration.
Sarah Phan-Budd, TIPP Construction of PVC Extrusions for NO A Near and Far Detectors Sarah Phan-Budd Argonne National Lab On Behalf of the NO A.
Overview of Phase 4 Performance Validation Methods and Techniques.
Status Report #4 Walking Charger By: Carlos Benitez, Meryem Fennich, Srinath Kota, Jackseario Rosario September 29 th 2010 Description: Battery charger.
Carmen Cohn Resistance form in endodontics. Carmen Cohn When a GP root filling is being condensed, there is a tendency to be pushed through the apex.
Problem Statement There are over 25 million children under the age of 5 in the United States, many of these children are taken out to restaurants to eat.
Composite Materials Manufacturing Composite Materials Manufacturing 정분방.
Start with your equation Move the # term to the other side, and leave a space Determine what HALF of the coefficient of X is Factor the left side Write.
Cost Efficient Off-Board Tank Storage for Compressed Hydrogen Gas Kevin L. Klug (CTC) Michael Olson (HyPerComp Engineering, Inc.) NHA Annual Hydrogen Conference.
Pressure and Temperature William Thomson “Lord Kelvin”
UNIT 5: GASES & ATMOSPHERIC CHEMISTRY 11.1, 11.2 – The Basics of KMT and Pressure.
You can predict how pressure, volume, temperature, and number of gas particles are related to each other based on the molecular model of a gas.
In what phase is cell #1?. Name this part of the microscope.
The NOvA Experiment Ji Liu On behalf of the NOvA collaboration College of William and Mary APS April Meeting April 1, 2012.
The bird IPPB machine The Bird is pneumatically powered & controlled. it can be triggered  by negative pressure  by time or  manually. It is pressure.
GASES Unit 10. KINETIC-MOLECULAR THEORY OF GASES 1.Gases consist of tiny atoms or molecules that are in constant random motion. 2.The space between gas.
CIS 825 Lecture 8. Leader Election Aim is to elect exactly one node as the leader.
Tutorial: Engineering technology Topic: Volume forging – Extrusion Prepared by: Ing. Elena Nová Projekt Anglicky v odborných předmětech, CZ.1.07/1.3.09/
Investigation of fluid- fluid phase transition of hydrogen under high pressure and high temperature 2014/11/26 Shimizu laboratory SHO Kawaguchi 1.
UNIVERSAL M. ENTP. www. affordablehousing. ug AFFORDABLE HOUSING & MUCH MORE JAN 01 – JAN 15.
ERT352 FARM STRUCTURES It doesn’t matter what the subject is; once you’ve learnt how to study, you can do anything you want.
Brandon Chaffins Jonathan Fonseca Cherian Jacob Animesh Aga Philip Kang Benson Lee Week 16: Final Presentation 12/03/2008.
Electric Current. The rate at which electrical charges flow through a wire or conductor is called electric current.The rate at which electrical charges.
Extrusion Modules – The Active Detector Ken Heller University of Minnesota Talks by: Tom Chase – Progress on End Seals and Leak Detection QA Alex Smith.
Plants and Light and Water transport. The Leaf Leaves are specialised structures for photosynthesis. They have several adaptation that suit them.
Nanofocus AG 2012/07/19 Optical process tools for automotive Technical surface characterization to fulfill today’s customer demands 1.
© 2009 Factory Strategies Group LLC. All rights reserved. Safety Series (Sample Slides) Lockout - Tagout.
TH-57 Fuel System Review. The two electrical boost pumps installed inside the fuel cell are interconnected by a hose so that they can furnish pressurized.
GAS LAWS. Properties of Gases Composed of randomly scattered particles No definite _________ or ___________ Spread out to fill the space of their.
UNIVERSAL M. ENTP. www. affordablehousing. ug AFFORDABLE HOUSING & MUCH MORE JAN 16 – JAN 31.
IS BEAM PUMPING RIGHT FOR YOUR PRODUCTION Rugged, simple - easy to understand Forgiving Good diagnostics exist Possible to pump the well down to low bottom.
2 “AIR COOLER” Heat Exchanger General Assembly view Structure Stationary Header Floating Header Plug Tubes Electric motor Fan Conveyor Inlet Outlet Scaffold.
Job Performance Requirement 7-13 Servicing an SCBA Cylinder Using a Cascade System.
POLYNOMIALS – Product of Polynomials Binomial times a binomial METHOD 1 : F.O.I.L. FOIL is an acronym for First, Outside, Inside, Last when multiplying.
You Should Know Bulletin No. 135 © ACPA All Rights Reserved.
Blood Gas Analysis and Analyzer (BME Lab 2) Palestine Polytechnic University Engineering & Technology Collage Electrical &Computer Department Biomedical.
Energy Performance and Moisture Control of Ceilings and Roofs 1.
© 2017 SlidePlayer.com Inc. All rights reserved.