We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byMadisen Bevens
Modified about 1 year ago
Warning! All information contained herein are the properties of Tim Nash. Do not duplicate or distribute this side show with my permission!
Start-up Screens First Start-up Screen
Start-up Screens Second Start-up Screen
Start-up Screens Fourth Screen. You can see the LED’s are flashing. (I missed the third screen)
Start-up Select Screen After the start-up screens, the controller waits for an input from the operator for 5 seconds. If no input, the controller loads the last settings by default.
OEM Settings load The factory settings are: V-Boost on – 6000 rpm V-Boost full rpm Shift Light – 9000 rpm Rev Limit – rpm
New Settings Screen Three button menu selects the new settings for v-boost, rev limit, and shift.
V-Boost On Screen Adjust to set when the v-boost starts to open the servo.
V-Boost Wide Open Adjust to set RPM where the V-Boost is wide open.
Rev Limit Screen Adjust to set the Rev Limit RPM.
Shift Light Screen Adjust to set the shift RPM
Saving Screen This is displayed when any setting has been modified.
Smoking Screen This is displayed after an adjustment to the v- boost settings.
Key on, bike off screen
Yee-Ha Button Fully opens v-boost at 1800 RPM with out going threw all the screens (just in case a v-rod happens by on a Sunday).
Wide Open % Controller is indicating V-Boost output. Output is scaled and indicated in 10% increments.
The Basic Sharing Screen Here is the basic Adobe Connect display screen. The Pod arrangement may differ but your controls will be the same. Pods are the.
Enterprise Portal Training Creating Portal Pages Click on arrow to go forward or back.
©2005 Genworth Financial, Inc. All rights reserved. Company Confidential Winflex LTCI Illustration Software February, 2006 ©2006 Genworth Financial, Inc.
First Grade Sight Words a in I and is it for.
Online Leave Request Employee Training June 2010 Press the F5 key to see this presentation in full-screen mode.
3 Dashboard and immobilizer new features 4 2 Dashboard Dashboard User interface User interface LCD LCD 1 Tuono 1000.
Introduction to Eclipse. Start Eclipse Click and then click Eclipse from the menu: Or open a shell and type eclipse after the prompt.
JQuery MessageBoard. Lets use jQuery and AJAX in combination with a database to update and retrieve information without refreshing the page. Here we will.
Turn LCD Projector on by pushing Projector on button Projector buttons will flash for a few seconds until fully on and on button will be lit.
MATRIX REPORTER HYPACK & DREDGEPACK Purpose of the MATRIX REPORTER To provide a quick report of progress in any dredging environment. To allow the.
Using the AiM® Customer Request Module Follow the red arrows as we go through the presentation. Your screen will look similar to this one when you first.
Working with Tables for Page Design – Lesson 41 Working with Tables for Page Design Lesson 4.
Value Control with Variables Joe Long Robofest Student Assistant Lawrence Tech Computer Science Major April 12, 2007.
Inspiration. Copyright Acadia Institute for Teaching and Technology Acadia University, Wolfville, NS, Canada, B0P 1X0 Tel. (902) , Fax (902)
Creating and Submitting Orders Remy Order Management System.
It is expected that this training will take about 20 minutes to complete. It is aimed at users who are unfamiliar with Gemini, and is intended to give.
MS Access 2003 Tutorial By: Juan GUANTENG!!! Y7. Step 1 Launch the Microsoft Access 2003 program. This can be done by clicking an icon on the desktop.
Compose Workflow. Home page To compose a workflow navigate to the “Workflow Editor” page.
Office of Program Development and Funding Electronic Grants Management System Tutorial #5: Creating a Property Report (Equipment Inventory and Receiving.
Introducing The IP550 IP Telephone. Things you should know about an IP Telephone system The IPitomy system has many of the same features of traditional.
Introduction to the Mac user-interface The Mac user interface is subtly different from the Microsoft Windows interface So we will spend a few minutes pointing.
Managing Your Site – Lesson 61 Managing Your Site Lesson 6.
Support.ebsco.com EBSCOhost Collection Manager Selector Account Functions Tutorial.
Intro to Computers!. The Desktop When you turn the computer on the screen that appears is called the Desktop Icons Date/Time Task Bar Start Button: Open.
The. of and a to in is you that it he for.
Tandberg MXP Training Version 1.1, By David Anstee, First Connections Ltd.
Configuration Review Score My Team. Configuration Review Employees or Configuration Reviewers will review other employees’ Configurations You will not.
Support.ebsco.com EBSCOadmin Multilingual Options Tutorial.
Ordering of pages Screen Shots When you create your links, you order the pages as you would like them to display.
© 2016 SlidePlayer.com Inc. All rights reserved.