1. Pre Check In - Auto Shipment = OFF final

2. We start making a PreCheckIn with pickup.

3. Pre Check In - Auto Shipment = OFF final Step 1 Klik op de knop Exit.

4. Pre Check In - Auto Shipment = OFF final Step 2 Klik op de knop Exit.

5. Pre Check In - Auto Shipment = OFF final Step 3 Klik op de knop Exit.

6. Pre Check In - Auto Shipment = OFF final Step 4 Email is sent and mail is received. Houd de linkermuisknop ingedrukt en sleep de muis naar de gewenste locatie.

7. Pre Check In - Auto Shipment = OFF final Step 5 BUG: Here we have a bug. 1: Agreement - In should be at 777 (agreement in) branch 2: Shipment -EST should be at 658 (serving Branch) That is were the car is going to. The green part is good. Bugs are in the red areas. Laat de muisknop los.

8. Pre Check In - Auto Shipment = OFF final Step 6 BUG: 1: H.O. is showing shipment number now, this should be the Agreement number 2: Shipment NO is empty, should be shipment number. 3: AAN: is showing check in branch from agreement. This should be the t Transporter from the Shipment. Extra requirement: 1: Destination branch data is missing, can the be included? Klik op het lijstitem AAccepted.

9. Pre Check In - Auto Shipment = OFF final Step 7 Klik op de knop Proceed.

10. Pre Check In - Auto Shipment = OFF final Step 8 BUG: After accepting the shipment manualy via Rentpro CS email is sent according Rentpro. But we do not receive it. It should be send with the same mailserver as the automatic shipment - Pre check in mails. Klik op de knop Ja.

11. Pre Check In - Auto Shipment = OFF final Step 9 End of Procedure.