1. 3D Machine Control Systems
GCS900 for Dozers
GCS900 for Graders
GCS900 for Excavators
CCS900 for Compactors

2. Station Content Guide the presenter of the sub-stations should
cover the following content at the different machines (sub-stations)
cover the points listed per machine (sub-station) and repeat constantly the points from the next slide
show the configuration which we have installed and on display so that the customer understands the parts of the system
show flexibility in terms of AccuGrade or GCS900 depending on what is installed on the machines (sub-stations)

3. Grade Control Systems GCS900 & Compaction Control Systems CCS900
3D Machine Control Systems
Flexible and interchangeable from machine to machine and machine type to machine type
Supported from one Control Box with one onboard software
Full support of 2D functionality also on the CB430
Multilingual support
Wide range of configurations in hard- and software
Support of the base-station free use of satellite based augmentation services (SBAS)
Available for all machine manufacturer and also as factory fitted Trimble Ready pre-installation

4. GCS900 – Grade Control System for Dozers
3D machine control system for dozers
Indicating or fully automatic controlled
Multiple configurations
Dual GPS/GLONASS antenna
Single GPS/GLONASS antenna & Cross Slope Sensor
GPS/GLONASS antenna plus Laser Augmentation
UTS Total Station
Laser Receiver
Blate Rotation (6-way-blade) and Blade Rolling (mast leaning) is supported
Provides fine grading accuracies
<2-3cm with GPS/GLONASS
<3-5mm with UTS

5. Trimble GCS900: 3D Dozer – UTS & Cross-slope
CB430
LB400
MT900
SNR
SNM930 or
Harness
Power Module
PM400
Valve Module
VM4X0
Crossfall Sensor
AS400
Mainfall Sensor
AS400 (optional
for blade rolling)
Rotation Sensor
RS400 (optional for
blade rotation)

6. Trimble GCS900: 3D Dozer – GNSS & Cross-slope
CB430
LB400
MS9X0
SNR
SNM930 or
Harness
Power Module
PM400
Valve Module
VM4X0
Crossfall Sensor
AS400
Mainfall Sensor
AS400 (optional
for blade rolling)
Rotation Sensor
RS400 (optional for
blade rotation)

7. Trimble GCS900: 3D Dozer – Dual GNSS
CB430
LB400
Dual MS9X0
SNR
SNM930 or
Harness
Power Module
PM400
Valve Module
VM4X0
Mainfall Sensor
AS400 (optional
for blade rolling)

8. GCS900 – Grade Control System for Graders
3D machine control system for dozers
indicating or fully automatic controlled
multiple configurations
Dual GPS/GLONASS antenna
Single GPS/GLONASS antenna & Cross Slope Sensor
GPS/GLONASS antenna plus Laser Augmentation
UTS Total Station
Laser Receiver
Blade Rolling (mast leaning) is supported
Provides fine grading accuracies
<2-3cm with GPS/GLONASS
<3-5mm with UTS

9. Trimble GCS900: 3D Grader – UTS & Cross-slope
CB430
LB400
MT900
SNR
SNM930 or
ST400
(opt)
Harness
Power Module
PM400
Valve Module
VM4X0
Mainfall Sensor
AS400
Mainfall Sensor
AS400 (optional
for blade rolling)
Crossfall Sensor
AS400
Rotation Sensor
RS400

10. Trimble GCS900: 3D Grader – GNSS & Cross-slope
CB430
LB400
MS9X0
SNR
SNM930 or
ST400
(opt)
Harness
Power Module
PM400
Valve Module
VM4X0
Mainfall Sensor
AS400
Mainfall Sensor
AS400 (optional
for blade rolling)
Crossfall Sensor
AS400
Rotation Sensor
RS400

11. Trimble GCS900: 3D Grader - Dual GNSS
CB430
LB400
Dual MS9X0
SNR
SNM930 or
Harness
Power Module
PM400
Valve Module
VM4X0
Mainfall Sensor
AS400 (optional
for blade rolling)

12. GCS900 – Grade Control System for Excavators
3D machine control system for the excavator bucket
Configurations:
Dual antenna GPS/GLONASS system
Single antenna GPS/GLONASS system
UTS Single system
Multiple language support
Multiple bucket support
Tilt bucket support
VA boom support
Indication system
Available for all machine manufacturers and sizes
Provides fine grading accuracies
<2-3cm with GPS/GLONASS or UTS

13. Trimble GCS900: 3D Excavator - UTS
CB430
LB400
MT900
SNR
SNM930 or
Harness
Rototilt
AS455
(optional)
Platform
AS21-2
Boom
AS450
Stick
AS450
Bucket
AS450
Tilt-bucket
AS450
(optional)

14. Trimble GCS900: 3D Excavator - Single GNSS
CB430
LB400
MS9X0
SNR
SNM930 or
Harness
Rototilt
AS455
(optional)
Platform
AS21-2
Boom
AS450
Stick
AS450
Bucket
AS450
Tilt-bucket
AS450
(optional)

15. Trimble GCS900: 3D Excavator - Dual GNSS
Dual MS9X0
SNR
CB430
LB400
SNM930 or
Harness
Rototilt
AS455
(optional)
Platform
AS21-2
Boom
AS450
Stick
AS450
Bucket
AS450
Tilt-bucket
AS450
(optional)

16. CCS900 - Compaction Control System for Rollers
3D Compaction Control System for Soil Compactors
In-cab QA/QC indicating system
Configurations:
GPS/GLONASS Single roof or drum mounted with Cross-Slope Sensor AS400
GPS/GLONASS Dual drum mounted
UTS configuration drum mounted with Cross-Slope Sensor AS400
Compaction Sensor CM310 as an option
Provides compaction information over the entire job
CMV mapping, on-screen graphical indication and map inspection
RMV on-screen indication
Cut/Fill mapping
Proofing mode
Trimble SiteVision® Office Compaction Module for analysis and reporting and documentation

17. Trimble CCS900: 3D Soil Compactor – UTS
CB430
LB400
MT900
SNR
SNM930 or
Harness
Power Module
PM400
Crossfall Sensor
AS400 (opt)
Compaction Sensor
CM310 (opt)

18. Trimble CCS900: 3D Soil Compactor – Single GNSS
SNR
MS9X0
CB430
LB400
SNM930 or
Harness
Power Module
PM400
Crossfall Sensor
AS400 (opt)
Compaction Sensor
CM310 (opt)

19. Trimble GCS900: 3D Soil Compactor – Dual GNSS
Dual MS9X0
SNR
CB430
LB400
SNM930 or
Harness
Power Module
PM400
Compaction Sensor
CM310 (opt)

20. Trimble MCS Family Summary
With the Trimble GCS family upgrading is easy
MCS = Common parts
MCS = Upgradeable
MCS = A system that grows with you
GCS Grade Control Systems
+ CCS Compaction Control Systems
= Productivity from one single provider
You have a choice of technologies and configurations
Select the one most suited to your job site and accuracy requirements
The product grows with you!!