Presentation is loading. Please wait.

Presentation is loading. Please wait.

Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up www.easyguides.com.au How to use this presentation.

Similar presentations


Presentation on theme: "Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up www.easyguides.com.au How to use this presentation."— Presentation transcript:

1 Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up How to use this presentation Home Plan job Question 3. What sorts of hazards do you need to plan for? Click for answer marker Tripping hazards Ground stability Wind, lightning or rain Radio interferenceSlinging hazards

2 Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up How to use this presentation Home Select and inspect equipment Question 24. What personal protective equipment (PPE) must a dogger wear? Click for answer marker Safety glasses to protect your eyes Safety shoes/boots Safety helmet to protect your head Hi-vis vests

3 Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up How to use this presentation Home Prepare site and equipment Question 27. You will use a two-legged Grade T (80) chain in a choke hitch on a square load at an angle of 60 degrees. The weight of the load is 1750kg. What’s the smallest diameter slings you need to use? First, calculate the WLL. WLL = load ÷ angle factor ÷ reeve factor WLL = 1750 ÷ 1.73 x 0.75 WLL = kg Now we can work out the diameter of the chain sling. Use the reverse “rule of thumb” formula for Grade T (80). Diameter = √(WLL ÷ 32) D = √( ÷ 32) D = √42.14 D = 6.49mm (round up) D = 7mm marker Click for answer

4 Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up How to use this presentation Home Perform task Question 37. When choosing the lifting/slinging points, what do you need to think about? Click for answer Reeve and angles Strength and security of the slings Load balance and centre of load distribution marker

5 Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up How to use this presentation Home Shut down and clean up Question 49. What should you do with hazard controls when the job is finished? Click for answer Take down signs marker Take down safety netsPut away safety barriers and witches hats


Download ppt "Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up www.easyguides.com.au How to use this presentation."

Similar presentations


Ads by Google