Presentation is loading. Please wait.

Presentation is loading. Please wait.

1 1 AUTOMOTIVE NEW PRODUCTS 2013 “STEP IV” AUTO NEWS #2 INTERNALLY: EXTERNALLY:  CREEPERS AND STOOLS  HYDRAULICS  AIR TOOLS  PRESSES  PLASTIC REPAIR.

Similar presentations


Presentation on theme: "1 1 AUTOMOTIVE NEW PRODUCTS 2013 “STEP IV” AUTO NEWS #2 INTERNALLY: EXTERNALLY:  CREEPERS AND STOOLS  HYDRAULICS  AIR TOOLS  PRESSES  PLASTIC REPAIR."— Presentation transcript:

1 1 1 AUTOMOTIVE NEW PRODUCTS 2013 “STEP IV” AUTO NEWS #2 INTERNALLY: EXTERNALLY:  CREEPERS AND STOOLS  HYDRAULICS  AIR TOOLS  PRESSES  PLASTIC REPAIR SET  INJECTOR PULLER SET  OIL TRANSMISSION FILLER  DIGITAL TORQUE ADAPTORS  ROLL CARTS, TROLLEY ACCESSORIES  ERGO HEAVY DUTY SIDE CUTTING PLIERS BRAND NEW RE- LAUNCH  TIE ROD TOOL

2 2 2 Auto News #2 Hydraulics Presses Creepers and stools Injector puller set Oil transmission filler Tie rod tool Air tools Plastic repair kit Digital torque adaptors Roll carts Trolley accessories ERGO side cutters Step I Step IIStep III Step IV

3 3 3 HYDRAULICS LIFTING EQUIPMENT

4 Product features:  The stand raises automatically when pulling the lever upwards.  No efforts to raise the stand thanks to a spring inside the pole.  Allows the user to have one free hand.  Exclusivity in Europe.  Three different capacities: 3, 5 and 10 ton.  BS & TÜV approved.  Sold in pairs. AUTO RISING PAIR OF JACK STANDS NEW Product code EAN codeCapacity (kg) Minimum height (mm) Maximum height (mm) Frame length (mm) Weight (kg) BH3A3000 BH3A5000 BH3A ,000 5,000 10, x 188 x x 248 x x 327 x Maxi height Mini height

5 Product features:  Wider base surface in order to reduce the pressure on the ground and to allow supporting weights on sand or similar.  Strong safety pins with rubber grip.  The base has a place where you can put the pin vertically. The pin is attached to the base with a small cable to prevent it from getting lost when not in use.  Two different capacities: 7 and 15 ton.  BS & TÜV approved. JACK STANDS WITH SQUARE BASE NEW Product code Capacity (kg) Minimum height (mm) Maximum height (mm) Frame length (mm)Weight (kg) BH3SQ7000 BH3SQ ,000 15, x 220 x x 250 x

6 6 Product features:  Foldable body and four fixed positions of the lifting arm: 2,000, 1,500, 1,000, 500 kg.  Dual pump cylinder which decreases the number of necessary strokes by 50% (compared to Irimo version).  Extreme flexibility and wide area of usage;  Minimum legs entry height: 130 mm  Maximum arm hook height: 2,640 mm  Steel and PU (polyurethane) covered wheels ensures both excellent durability and silent handling.  Swiveling PU covered lever for easy and comfortable pumping from all positions.  Increased safety thanks to:  ”Dead man” safety mechanism.  Overload valve.  Swivel safety hook.  CE certified. FOLDABLE CRANE, 2 TON NEW Product codeEAN Code Pcs DimensionsWeight (mm)(kg) BH6FC ,950 x 580 x Dimensions on next slide!

7 7 FOLDABLE CRANE, 2 TON NEW 7

8 8 Product features:  Very compact and easy to store thanks to the foldable legs system.  Foldable body and three fixed positions of the lifting arm: 200, 400 and 600 kg.  Dual pump cylinder which decreases the number of necessary strokes by 50%.  Extreme flexibility and wide area of usage:  Minimum legs entry height: 100 mm.  Maximum arm hook height: 2,135 mm.  Steel and PU (polyurethane) covered wheels ensure both excellent durability and silent handling.  Swiveling PU covered lever for easy and comfortable pumping from all positions.  Increased safety thanks to:  ”Dead man” safety mechanism.  Overload valve.  Swivel safety hook.  CE certified. FOLDABLE EUROPALLET CRANE, 600 KG NEW Product code EAN Code Pcs DimensionsWeight mmkg BH6PC x490x Dimensions on next slide!

9 9 FOLDABLE EUROPALLET CRANE, 600 KG NEW 9

10 10 Product features:  Multi purpose jack to be used with cars, ATV/ Quads and motorcycles.  It has two functions: works both as a trolley jack (lift up) and as a jack stand (keeps the vehicle lifted).  Extra large round shaped foot pedal for increased access from any position.  Dual pistons which decreases the number of necessary strokes with 50% (compared to single piston unit).  Rubber saddle included protecting all surfaces and prevents slipping.  Steel and PU (polyurethane) covered wheels ensures both excellent durability and silent handling.  Curved handle for increased comfort and accessibility.  Useful tray located at the bottom of the lever for easy storage of for example tools, screws and nuts.  Safety pressure valve preventing overloading.  Safety lowering valve ensures safe lowering even at maximum load.  Clicking / ratcheting system blocks the arm and acts as a jack stand with four positions.  CE certified and in accordance with BS EN1494 compliance. MULTI PURPOSE JACK, 1.0 TON NEW 10 Product code Capacity (kg) Minimum height (mm) Maximum height (mm) Frame length (mm) Weight (kg) BH1M x480x

11 Product features:  Double plunge for quick lifting (7 strokes).  Protected handle to avoid damaging the car.  Rubber saddle included.  PU wheels.  CE and EN1494 certified. ENTRY LEVEL FLOOR JACK, 3 TON NEW Product code Capacity (kg) Minimum height (mm) Maximum height (mm) Frame length (mm) Weight (kg) BH1EU x395x16031

12 12 OTHER GARAGE EQUIPMENT CREEPERS AND STOOLS

13 13 Product features:  Adjustable header with three positions.  Capacity: 136 kg.  Low height: 120 mm.  High density foam pad for higher resistance with good comfort.  Hanger at the back for easy storage in the garage.  Four PVC wheels, with 75 mm diameter, 25 mm width and steerable 360º. LOW PROFILE CREEPER NEW 13 Product code EAN code Foam width (mm) Creeper outer dimension (mm) Creeper height (mm) Wheel dimensions (mm) Weight (kg) BLE ,020 x x

14 14 Product features:  Three working positions: creeper, seat and stool.  Capacity: 136 kg.  Low height: 135 mm.  High density foam pad for higher resistance with good comfort.  Six PP (polypropylene) wheels, with 60 mm diameter, 10 mm width and steerable 360º. CREEPER AND STOOL COMBI NEW 14 Product code EAN code Foam width (mm) Creeper outer dimension (mm) Creeper height (mm) Wheel dimensions (mm) New weight (kg) BLE ,010 x x Position 1: creeper Position 2: seat Position 2: stool

15 15 Product features:  Flexible height with easy-to-use adjustment system.  Capacity:136 kg.  Three drawer storage plus a tray for storage of tools, fasteners, accessories or any type of object.  Rotatable high density foam pad for higher resistance with good comfort.  Four PVC wheels, with 75 mm diameter, 25 mm width and steerable 360º. STOOL WITH STORAGE NEW Product code EAN code Seat diameter (mm) Storage outer dimension (mm) Seat heights (mm) Wheel dimensions (mm) New weight (kg) BLE x 380 x x

16 16 OTHER GARAGE EQUIPMENT PRESSES

17 17 Product features:  Robust welded frame with exclusive design thanks to the rounded shapes.  Large pressure gauge for easy reading at convenient eyes level.  Sliding and chromed piston.  Rulers to facilitate centring the piston with the item to extract or insert.  Two V-blocks included usable on V or flat side depending on the need.  Auto-centering pins for the table.  Double speed pump with built-in safety overload valve.  Quick approach.  Pressing pins set with six pins and a punch plate included.  All handles and knobs are isolated.  Tool tray at the bottom. Robust and stable feet. BENCHPRESS, 15 TON NEW 17 Product code EAN code Capacity (ton) Pedal HandleWinchPressing pins set Weight (kg) BH NoYesNoYes80.0 Dimensions on next slide!

18 18 Dimensions: BENCHPRESS, 15 TON NEW 18

19 19 Product features:  Robust welded frame with exclusive design with rounded shapes.  Large pressure gauge for easy reading at convenient eyes level.  Sliding and chromed piston.  Rulers to facilitate centring the piston with the item to extract.  Two V-blocks included usable on V or flat side depending on the need.  Auto-centering pins for the table.  Double speed pump with built-in safety overload valve.  Easy raising and lowering of the press table thanks to the winch with swiveling handle.  Quick approach thanks to the pedal or the handle.  Pedal with anti-slip rubber pad.  Pressing pins set with eight pins and a punch plate included.  All handles are isolated.  Tool tray at the bottom. Robust and stable feet. PRESSES 20, 30 AND 50 TON NEW 19 Product code EAN code Capacity (ton) PedalHandleWinchPressing pins set Weight (kg) BH720 BH730 BH Yes Dimensions on next slide!

20 20 NEW 20 PRESSES 20, 30 AND 50 TON Dimensions:

21 21 Product features:  Safety guard to protect the user against projections of components during pressing.  Easy to install with just four screws.  The guard can be easily adjusted vertically according to the position of the table by just sliding the guard in the lateral guides, see picture. SAFETY GUARD FOR 20, 30 AND 50 TON PRESSES NEW 21 Product codeEAN CodeDescriptionFrame length (mm) BH720SG BH730SG BH750SG Safety guard press 20T Safety guard press 30T Safety guard press 50T 220 x 188 x x 248 x x 327 x 502

22 22 BODY REPAIRING PLASTIC REPAIR

23 23 HOT STAPLER / PLASTIC REPAIRING SET Product Features:  Application: allows the user to repair broken plastic through electric heating.  Application areas:  Car body repair shops  All kinds of maintenance departments  Electricians  Contents:  Electric heating device including pen and cable with EU plug.  U-shaped Staplers Ø 0.6 mm (100 units in a plastic box).  U -shaped Staplers Ø 0.8 mm x [(00 units in a plastic box).  V –shaped Staplers Ø 0.6 mm x (100 units in a plastic box).  Small electric device, enabling a very quick and strong repair.  Place the stapler in the pen, heat it up and you can easily put together broken pieces of plastic.  Heat control with three different positions, choose the level that suits the strength of the plastic to be worked on.  Several stapler shapes and sizes available, in total six different types offered individually (see next page).  Lateral TPR cover for protection of the device and a professional design.  Supplied in a foam inlay in blow mould case with user manual.  Check out our application video on YouTube: 23 Product codeEAN CodePcsBox dimensions (mm)Weight (kg) BBS x 357 x

24 24 ACCESSORIES FOR HOT STAPLER / PLASTIC REPAIRING SET  Boxes of staples,100 pcs. 24 CodeØ (mm)ShapePicture BBS210V060.6V BBS210U060.6U BBS210UA060.6U and Angled BBS210W060.6W BBS210V080.8V BBS210U080.8U BBS210UA080.8U and Angled BBS210W080.8W

25 25 ENGINE AND PLUG TOOLS INJECTION

26 26 Product features: The kit includes: Puller with 4 kg sliding hammer. 10 various sockets and adaptors for removing Siemens, Bosch, Delphi and Denso injectors. 1 ball joint to facilitate the pulling in different positions. INJECTORS PULLER SET NEW 26 Product code EAN code Number of adaptors and sockets Weight kg BE1311P

27 27 OIL CHANGE, GREASING & LUBRICATION OIL CHANGE TOOLS

28 28 Product features:  Oil transmission filler, by using pressure.  Tank in polypropylene with 8 liters capacity.  Comprehensive set of 11 hose adaptors covering the majority of the car brands. OIL TRANSMISSION FILLER NEW 28 Product code EAN code Nber adaptors and sockets Weight kg BOD6080P

29 29 TRANSMISSION AND WHEEL TOOLS WHEEL ALIGNMENT

30 30 TIE ROD REMOVAL/INSTALLATION TOOL Product features:  This tool makes it possible to install and remove steering knuckles from Ø 28 up to Ø 35 mm.  Completing our range of tie rods (our current BS50 covers Ø 35 up to Ø 45 mm).  The tool includes a head, a tube and a hexagon drive.  The head is composed of a body, a cage and 3 runners.  The rotation of the tool enables the self-locking of the runners between the body and the knuckle to screw or to unscrew.  New user manual available on the Intranet for BS50 and BS51.  Two repair sets available: BS5001 for BS50 and BS5101 for BS51. Product codeEAN code Pcs Box dimensions (mm)Weight (kg) BS x 460 x BS x 460 x BS x 100 x BS x 100 x

31 31 AIR TOOLS TOP LINE

32 32 ICON INDEX Strikes per minute

33 33 Product features:  Magnesium housing.  Twin hammer mechanism with eight vanes rotor.  Rubber grip.  One-hand operation power regulator.  Fast forward/reverse valve.  Air exhaust in handle.  Rubber boot included.  Muffler kit included to choose the preferred power and sound combination.  The difference vs. BPM916 is that BPM916P is equipped with a pinned anvil for keeping the socket safely attached. 3/8" IMPACT WRENCH WITH PINNED ANVIL NEW 33 BPM916P /8”6.21/4” ,700 1, BPM /8”6.21/4” ,700 1,

34 34 Product features:  Magnesium housing.  Twin hammer mechanism with eight vanes rotor.  Rubber grip.  One-hand operation power regulator.  Fast forward/reverse valve.  Air exhaust in handle.  Rubber boot included.  Muffler kit included to choose the preferred power and sound combination.  The difference vs. BPM914 is that BPM914P is equipped with a pinned anvil for keeping the socket safely attached and BPM914L has a long anvil for better accessibility. 1/2" MINI IMPACT WRENCH WITH PINNED ANVIL NEW 34 BPM914P /2”6.21/4” ,700 1, BPM914L /2”6.21/4” ,700 1, BPM /2”6.21/4” ,700 1, /2" MINI IMPACT WRENCH WITH LONG ANVIL

35 35 Product features:  Magnesium housing.  Twin hammer mechanism with eight vanes rotor.  Rubber grip.  One-hand operation power regulator.  Fast forward/reverse valve.  Air exhaust in handle.  Rubber boot included.  Muffler kit included to choose the preferred power and sound combination.  The difference vs. BPM915 is that BPM915P is equipped with a pinned anvil for keeping the socket safely attached and BPM915L has a long anvil for better accessibility. 1/2" IMPACT WRENCH WITH PINNED ANVIL NEW 35 BPM915P /2”6.21/4” ,8001, BPM915L /2”6.21/4” ,8001, BPM /2”6.21/4” ,8001, /2" IMPACT WRENCH WITH LONG ANVIL

36 36 Product features:  Die grinder 6 mm.  Includes 3 mm collet.  Rubber grip.  Safety trigger.  Balanced lightweight housing.  All ball bearing construction and high strength alloy steel gear system.  Hard coated motor plates. STRAIGHT DIE GRINDER, 6 MM NEW 36 BP /4” ,

37 37 Product features:  Angle die grinder 6 mm.  3 mm collet included.  Rubber grip.  Safety trigger.  Balanced lightweight housing.  All ball bearing construction and high strength alloy steel gear system.  Hard coated motor plates. ANGLE DIE GRINDER, 6 MM NEW 37 BP922A /4” ,

38 38 Product features and benefits:  Drill 10 mm with keyless chuck enabling the user to change drills fast and smoothly.  The difference vs. BP925 is that BP925KL is that BP925 has a key chuck.  Rubber grip.  Variable speed trigger.  Fast forward/reverse lever.  mm chuck runout. DRILL WITH AUTOMATIC CHUCK, 10 MM NEW 38 BP925KL /4” ,50080< BP /4” ,50080<

39 39 Product features and benefits:  Drill 13 mm with keyless chuck enabling the user to change drills fast and smoothly.  The difference vs. BP926 is that BP926KL is that BP926 has a key chuck.  Rubber grip.  Variable speed trigger.  Fast forward/reverse lever.  mm chuck runout.  Support handle included. DRILL WITH AUTOMATIC CHUCK, 13 MM NEW 39 BP926KL /4” < BP /4” <

40 40 AIR TOOLS BASE LINE

41 41 ICON INDEX Strikes per minute

42 42 Product features:  7" angle polisher.  Rubber grip.  Power regulator.  Safety trigger.  Spindle lock. 7" ANGLE POLISHER NEW 42 BP /4”101082,50090<

43 43 Product features:  7" vertical polisher.  Rubber grips.  Power regulator.  Air exhaust in support handle. 7" VERTICAL POLISHER NEW 43 BP /4”101772,

44 44 Product features:  Air shears.  Cutting capacity: 1.6 mm Aluminum/1.2 mm steel.  Rubber grip.  Power regulator.  Safety trigger. METAL SHEARS NEW 44 BP /4”10852,

45 45 Product features:  Extended cut off tool 4"/102 mm.  Rubber grip.  Power regulator.  Safety trigger.  Spindle lock. EXTENDED CUT OFF TOOL NEW 45 BP111E /4” , <

46 46 Product features:  Low revolution grinder/tyre buffer with keyed chuck.  Rubber grip.  Power regulator.  Safety trigger.  Swivel connection. LOW REVOLUTIONS GRINDER NEW 46 BP /4”101132,50079<

47 47 Product features:  Short version:  Air blow gun.  Brass inlet.  Long version:  Air blow gun with long nozzle, nozzle length 330 mm  Brass inlet. BLOW GUN NON OSHA NEW 47 BP /4”68< BP219L /4”340<

48 48 TORQUE TOOLS DIGITAL TORQUE ADAPTORS

49 49 ELECTRONIC TORQUE AND ANGLE ADAPTOR 49 Product features:  Enables easy and precise torque and angle tightening – all in one device!  Simple operation with a regular ratchet and socket.  Easy to follow the tightening in real time thanks to the 12 LED indicators and an audible signal.  Precise! Accuracy of ± 4% enables exact and accurate tightening.  Memory for up to 50 operations.  Possible to perform tightening in Nm, Lb.ft and Lb.in.  Angle tightening from 0-999º.  Possible to pre-set 9 different values for standardized tightening.  Small size enables torque tightening in confined and restricted areas.  Delivered in a protective pouch with foam inlay for maximum tool protection. Product codeDrive Torque range Nm Torque range Lb.ft Torque range Lb.in Box dimensions (mm) Packaging weight (g) TAM14301/41, x110x TAM381353/86, X110X TAM121351/26, X110X TAM122001/ ,4-147,588, X110X TAM123401/ , , X110X120450

50 50 DIGITAL ANGLE METER 50 Product features:  Enables precise and easy angle tightening with digital precision!  Strong magnet on the back – can be clicked onto any ratchet, wrench, adjustable etc.  Easy to follow the tightening in real time thanks to the 6 LED indicators and an audible signal.  Precise! Accuracy of ± 2% enables exact and accurate tightening.  Memory for up to 50 operations.  Angle tightening from 0-999º.  Possible to pre-set 9 different values for standardized tightening.  Small size makes it ideal for confined spaces.  Automatic shut-off for longer battery life.  Delivered in a protective pouch with foam inlay for maximum tool protection. Product codeEAN codeAngle range (º)Box dimensions Packaging weight (g) MAM50M x110x120280

51 51 TOOL STORAGE ROLL CARTS

52 52 TWO AND THREE TRAYS ROLL CARTS 52 Product features:  Three and two trays roll carts.  1470KC2 has two trays.  1470KC3 has three trays.  Large capacity trays for storing both small and bulky objects.  Manufactured and designed for easy and quick assembly.  Aluminum U shape structure.  Wheels of 25 x 100 mm with ball bearings and non-marking TPR on the surface.  2 swiveling.  2 swiveling with brake.  Internal dimensions of the trays: 750 x 425 x 77 mm.  Color: orange. Product codeEAN codeBox dimensions (mm)Weight (kg) 1470KC x 1,200 x KC x 960 x KCTRAY x 960 x

53 53 MULTIFUNCTIONAL ROLL CARTS 53 Product features:  Three drawers & two trays roll carts; one orange (1470KC5) and one black (1470KC5PC.)  Large foldable tray included: 435 x 425 mm.  Pry bar / screwdriver key locked box included: 23 holes of various diameters.  Manufactured and designed for easy and quick assembly.  Black painted aluminum U shape.  Strong and secure round type key and locking mechanism with same combination in roll cart and pry bar/ screwdrivers box.  Wheels of 100 x 25 mm with ball bearings and non-marking TPR on the surface: two swiveling and two swiveling with brake.  Large capacity drawers with click/detent system and 100% opening ball bearings.  Drawers can be locked from the upper tray.  Drawers internal dimensions:  (2 x) 675 x 375 x 50 mm  (1 x) 675 x 375 x 110 mm  Upper tray providing a large working surface of 700 x 440 mm, with two gas springs in the lid making the opening very smooth and comfortable.  Upper and bottom trays´ internal dimensions:(2x) 755 x 425 x 77 mm. Product codeEAN codeBox dimensions (mm)Weight (kg) 1470KC x 1,040 x KC5PC x 1,040 x

54 54 TOOL STORAGE ACCESSORIES

55 55 Product features:  Robust foldable metallic tray for extending the working surface when necessary.  Suitable for both the 1470 and 1475 series.  Easy to assemble (with a hanging system and 2 screws) in any of both laterals of the trolleys.  Load capacity: 35 kg.  Working surface: 455x460 mm. FOLDABLE TRAY NEW 55 Product codeEAN codeBox dimensions (mm)Weight (kg) 1470K-AC x 615 x

56 56 Product features:  Metallic box with 23 holes for storing pry bars and screwdrivers.  Suitable for both the 1470 and 1475 series.  The box is secured with the round type key lock already used in our trolleys.  Easy to assemble (with a hanging system and two screws) in any of the two lateral sides of the trolleys. TOOL HOLDER NEW 56 Product codeEAN codeBox dimensions (mm)Weight (kg) 1470K-AC x 435 x

57 57 Product features:  Robust can holder that can store several cans and sprays.  Suitable for both the 1470 and 1475 series.  Easy to assemble (with a hanging system and two screws) in any of the two lateral sides of the trolleys.  Space for cans: 455 x 85 x 140 mm. CAN HOLDER NEW 57 Product codeEAN codeBox dimensions (mm)Weight (kg) 1470K-AC x 483 x

58 58 Product features:  Robust document holder that can store documents and other objects.  Suitable for both the 1470 and 1475 series.  Easy to assemble (with a hanging system and two screws) in any of the two lateral sides of the trolleys.  Storage space: 355 x 80 x 180 mm. DOCUMENT HOLDER NEW 58 Product codeEAN codeBox dimensions (mm)Weight (kg) 1470K-AC x 386 x

59 59 Product features:  Metallic panel with slots and dots for hooks where you can hang the most used tools.  Easy to assemble with four screws in any of the two lateral sides of the trolleys.  Dimensions: 822 x 429 mm. SLOTS AND DOTS SIDE PANEL NEW 59 Product codeEAN codeBox dimensions (mm)Weight (kg) 1470K-ACSIDE x 849 x

60 60 Product features:  Set of drawer sheets, 7 pcs.  Ideal for protecting the drawers.  Prevents tools from moving inside the drawers.  Dimensions: 453 x 445 mm.  Fits all 1470K/1480K and 1475K and series drawers. DRAWER SHEET NEW 60 Product codeEAN codeBox dimensions (mm)Weight (kg) 1470KAC x 550 x

61 61 TROLLEY TOPS 61 Product features  Wooden tops for 1470K and 1475K trolleys:  SSNAWT1475: 40” for XL trolleys.  SNAWT1470: 26” for small trolleys.  Stainless steel tops for 1470K and 1475K trolleys:  1470KXL-AC5: 40“ for XL trolleys.  1470K-AC5 : 26“ for small trolleys.  Install the top by simply putting it on top of the trolley (the weight of the top is enough for keeping it stable) or by fastening it through the four holes in the top of the trolley (removing two or three upper drawers will make the job easier). Product codeEAN codeBox dimensions (mm)Weight (kg) SSNAWT x 1,050 x SNAWT x 600 x K-AC x 600 x KXL-AC x 1,050 x SSNAWT KXL-AC5 SNAWT1470

62 62 ERGO HAND TOOLS ERGO SIDE CUTTING PLIERS SEE SEPARATE LAUNCH INFORMATION


Download ppt "1 1 AUTOMOTIVE NEW PRODUCTS 2013 “STEP IV” AUTO NEWS #2 INTERNALLY: EXTERNALLY:  CREEPERS AND STOOLS  HYDRAULICS  AIR TOOLS  PRESSES  PLASTIC REPAIR."

Similar presentations


Ads by Google