We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byMalia Potvin
Modified over 2 years ago
used with FILTERS Copyright © 2013 by The S.E.A. Group
CHECK: Correct filter(s) Filter(s) correctly fitted Respirator clean, complete, correctly assembled Fit the SR200
Loosen the side straps of the head harness. Twist the strap holders forward and pull on the strap. Copyright © 2013 by The S.E.A. Group Fit the SR200
Sling the neck strap around your neck Lift the head harness up over the mask and away from your face Place your chin in the chin cup Copyright © 2013 by The S.E.A. Group Fit the SR200
Pull the head harness backwards towards your neck Copyright © 2013 by The S.E.A. Group Fit the SR200
Tighten the side straps in pairs by pulling the loose ends Copyright © 2013 by The S.E.A. Group Fit the SR200
If necessary, adjust the two top straps. Undo buckles and pull loose ends forwards Fasten the buckles Copyright © 2013 by The S.E.A. Group Fit the SR200
Loose ends can be hooked to the head harness Copyright © 2013 by The S.E.A. Group Fit the SR200
Thank you for watching Copyright © 2013 by The S.E.A. Group
Used with FILTERS Copyright © 2013 by The S.E.A. Group.
Adjustable Head Strap Instructions Step 1: To adjust the head strap hold goggle as above.
Menu Copyright © 2005 by The SEA Group negative pressure respirators.
Supplied-air hood Copyright © 2013 by The S.E.A. Group.
Used with FILTERS Copyright © 2013 by The S.E.A. Group Full face respirator.
Copyright © 2013 by The S.E.A. Group. A particle filter can be fitted to the front of a gas filter. Copyright © 2013 by The S.E.A. Group Make a combination.
1 Fire Fighter Qualifications and Safety Skill Drills 2.
Protect Yourself From Chemical/Biological Contamination Using Your Assigned Protective Mask.
2 Fire Fighter Qualifications and Safety Skill Drills.
Supplied-air regulator Copyright © 2013 by The S.E.A. Group.
CERVICAL COLLARS. 2 The Collar 3 Neutral Position The patient must be supine, sitting or standing, with the head in a neutral position eyes are forward.
A AN NIGHT VISION DEVICES
The JTC Claw Sling Kit, Assembly Sling Kit includes: One “Quick Release” Sling 2 – 4” adhesive backed Velcro “Loop Tape” 2 – 7” Double Sided Velcro straps.
Properly Securing the SCBA in Stowage Bracket Clips 1. Insert SCBA into walk-away bracket clips, ensuring the stowage strap is not trapped within the bracket.
Job Performance Requirement 7-1 Donning SCBA Over the Head Method.
CPS MILITARY SOLO SYSTEM DONNING AND ADJUSTING. TLO Given a CPS Military Solo System and combat equipment prepare the CPS Military Solo System for parachuting.
Radiation Protection Technology Respiratory Protection Air Sampling Radiological Safety and Response RPT-243-PE-6.
M40 FIELD PROTECTIVE MASK
Job Performance Requirement 7-3 Donning SCBA Seat- Mounted Apparatus.
1 Skill Drill 2-7 Donning a Face Piece Step 1: Fully extend the straps on the face piece. Step 2: Place your chin in the chin pocket. 2 Step 3: Fit the.
Application and Fit Checking of a P2/N95 Mask. OBJECTIVES Gain skills to effectively don a P2/N95 mask Techniques to ensure a correct fit check of the.
Personal Protective Equipment (PPE)
XR621 Drive Hose Update Kit. Removal Turn off Battery dis Drain hydraulic tank Remove both rubber lines under chassis and discard. Remove and discard.
Powered Air-Purifying PARTICLE Respirator (PAPR) Copyright © 2013 by The S.E.A. Group.
Unit 7.2. Respirator fit testing TB Infection Control Training for Managers at National and Subnational Level.
Lookout For Your Health Topic: GROWING UP BUCKLED UP IN NORTH CAROLINA Guest: Bill Hall, Manager Occupant Protection Program UNC Highway Research Center,
Place nozzle on hose and fold over about 4 to 6 inches past each end of pack. High-rise Pack Loading.
Full Face Masks w/Plug-In Connector Instructions for Use March O2 TNG, MRT Trainee - POM 1 Panorama Nova RP.
ER1000 ESCAPE RESPIRATOR ONLINE TRAINING Hunterdon County Homeland Security & Hunterdon County Office of Emergency Management May 2004 Made possible through.
Head jig usage procedure RKC London Office. Set the head jig 2) Put two screws with loose condition 3) Lock the plate 4) Tighten two head jig screws 5)
Stretching Stretching will make you feel better. Prevents many computer related problems before they start and if an injury has occurred, can help with.
PPE Use in Healthcare Settings: How to Safely Don, Use, and Remove PPE
Western Tacking Certification written portion. Vocabulary-Western Cinch A piece of equipment that is used to hold the saddle on the horses back. Latigo.
Tack up a Horse ( English version)
Knots, Harnesses, Belaying and the 6 point Check
Prescription Swim Goggle Goggle Parts Adjustable Head Strap Instructions Adjustable Bridge Instructions Rx Instructions Goggle Specs Care and Use Instructions.
Powered Air-Purifying Respirator (PAPR) Copyright © 2015 by The S.E.A. Group.
Copyright © 2013 by The S.E.A. Group Supplied-air hood.
MC11000 Kit Replacement 1 1. Open the face plate and remove the 2 screws. Remove and discard the original face plate. 3. Remove the 2 white caps on the.
Narration/Sound: Shot No. 1 Music fade in Narration/Sound: Shot No. 2 Music continues Narration/Sound: Shot No. 3 Music continues and fades out Narration/Sound:
MAINTAIN YOUR M-40 SERIES PROTECTIVE MASK WITH HOOD
Blackwood Fire Company Stihl Chainsaw Maintenance.
Safe Kids Presentation
MyLock 644D Service Seminar.
INSTALLATION MANUAL FATL Machine Installing: ACTIVITY CHECK POINT 1. Minimum two persons required for opening the Machine. 2. Cut the straps & tape. 3.
Model 12 Intek Horizontal OHV Governor Operation Lab #4.
© 2017 SlidePlayer.com Inc. All rights reserved.