Presentation is loading. Please wait.

Presentation is loading. Please wait.

Representor: Yoo D. Moon Date : November 25, 2008.

Similar presentations


Presentation on theme: "Representor: Yoo D. Moon Date : November 25, 2008."— Presentation transcript:

1 Representor: Yoo D. Moon Date : November 25, 2008

2  What you will need  Process  Tips and warning

3  Jack  Lug wrench  Spare tire  Tire blocks (Optional)  Gloves (Optional)  Flashlight (Optional)

4  Step 1 : Choose your spot well  Put the car in park in a level area  Apply parking break  Put manual transmissions in gear  Turn Engine off/ turn on hazard light  Open the hood

5  Step 2 : Remove tools from vehicle  Wedge wheel using a solid object  Get a spare tire, lug nut wrench, and jack.  Step 3 : Loosen the lug huts  Remove the hubcap, if necessary  Using the lug wrench, begin to loosen the lug nuts  Do not remove the lug nuts, only loosen them

6  Step 4 : Jack up the vehicle  Position the jack under the car, and raise until it contacts the frame Position the jack on the right position Contacts the car at a small plate on the frame of the car The plate is located just in front of the rear tires, and just behind the from tires.  Extend the jack about 6 inches off the ground

7  Step 5 : Remove the flat tire  Remove the lug nuts from the bolts, and put them aside  Grab the wheel Easy way : grab the tire at the “nine o’clock” and “three o’clock” position  Pull the wheel straight toward you, and off the car

8  Step 6 : Put on the spare tire  Position the spare tire directly in front of the wheel well  Align the holes in the center of the spare tire with the bolts on the car  Lift the spare tire and position it on the threaded bolts  Push the tire onto the car until it cannot go any father  Replace the lug nuts on the bolts and tighten them, but not too tight

9  Step 7 : Lower the vehicle  Lower the car with the jack until the car is again resting on all four tires  Tighten the lug nuts with one, then moving to the one opposite it, and so on

10  Step 8 : Put the tools away  Place the tools and the flat tire back to the original place  Carefully inspect your work area and make sure that you are not leaving anything

11  Put them all together

12  Squirt oil on the base of stuck lug nuts  Keep equipment ready  Never get under car with only a jack for support  Pull lug nuts (Don’t push)  Use knees (Not back) when using wrench

13  Caillouet, Corey. "How to change a tire." December Louisiana Tech University. 22 Nov  "Jack." Northrn Tool + Equipment. Northern Tool + Equipment. 22 Nov  Faulkner, Brandon. "Tire-Changing Instruction." Bandonfaulkner. 22 Nov 2008.

14  Any Questions???


Download ppt "Representor: Yoo D. Moon Date : November 25, 2008."

Similar presentations


Ads by Google