We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byBraydon Paskey
Modified over 5 years ago
1.0 Basic Handtools By Category Screwdriver types Pliers variations Wrenches classified Hammers
Screwdriver Types Standard or Slotted Tip Phillips Hex or Allen head Offset Torx Ratcheting
Phillips seven sizes: 000,00,0,1,2,3,4
Pliers think of as “super-fingers”; never on bolts/nuts
Pliers Combination or Slip Joint Arc Joint or Water Pump or Channel Lock or Tongue and groove Side Cutting or Diagonal Cutting Needle Nose Locking or Vice Grip others (electrical crimps...)
Water Pump or Arc Joint or Channel Lock
Wrenches Hand tool used for turning threaded fasteners by use of gripping jaws. There are a number of different types of wrenches.
Wrenches Open End Box End Combination Adjustable or Crescent Obstruction Ratcheting Box Offset Box Flare Nut Socket or Ratchet
Drive Size ¼ 3/8 ½ ¾ 1
Sockets Four descriptors for every socket 1. Size (dia.) (Metric or SAE) 2. Depth 3. Drive 4. Point Style
Sockets Size, or Dia. Always written on side
Sockets (Deep Vs. Short)
Hammers Ball Peen Dead Blow Drilling / Engineer / Mini Sledge Claw
Objective Define tools and materials used in agricultural engineering careers.
2 Chapter Hand Tools. 2 Chapter Hand Tools Objectives Identify the various types of hand tools. Describe the advantages and disadvantages of each type.
Tools and Functions R7AxwS3BnU.
Basic Hand Tools ELT COLLISION REPAIR.
TECHNICAL THEATRE I STAGECRAFT
Combination Wrench Imperial (Inch Increments) Domestic Vehicles. 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, 11/16”, ¾”, 7/8”, 13/16”, 1” Box/open End.
Produced by, Joe Wintermute ASE Certified Master Automobile Technician
Tool Identification Tool Identification and Use as Photographed and Prepared by Doug Best.
BASIC HAND TOOLS OPEN END WRENCH BOX END WRENCH.
By:Gord Darling Construction Technology
Section 2 Safety, Tools and Equipment, Shop Practices
Basic hand tools Tools. Basic hand tools Tools.
Tool Identification He who dies with the most tools; wins.
Tool Identification Ag Structures.
LAB TOOLS Identification and Function. POUNDING TOOLS HAMMERS- TO USE TO STRIKE AN OBJECT AND WILL LEAVE SURFACE MARRING AND DENTS ON THE OBJECT HAMMERS-
Hand Tool Identification Agriscience Technology Mr. Gibson.
Tool Identification Woodworking Hand Tools Manufacturing Tech 8 th Grade.
½ inch ratchet. Adjustable wrench/Crescent wrench.
A guide to the identification of Hand Tools
© 2020 SlidePlayer.com Inc. All rights reserved.