Presentation is loading. Please wait.

Presentation is loading. Please wait.

Accreditation of party for undertaking third party Disaster Management Inspection Mrutunjay Jena Deputy Director (NABCB) QUALITY COUNCIL OF INDIA New Delhi.

Similar presentations


Presentation on theme: "Accreditation of party for undertaking third party Disaster Management Inspection Mrutunjay Jena Deputy Director (NABCB) QUALITY COUNCIL OF INDIA New Delhi."— Presentation transcript:

1 Accreditation of party for undertaking third party Disaster Management Inspection Mrutunjay Jena Deputy Director (NABCB) QUALITY COUNCIL OF INDIA New Delhi (National Seminar, DMI,Bhopal on 28 Feb & 1 Mar 2011)

2 INTRODUCTION International scenario – increasing use of standards – for products, services, systems, processes Regulatory and Voluntary regimes Regulations on grounds of national security, deceptive trade practices, health, safety, environment Compliance with requirements to be established by inspection, testing or certification – Conformity assessment - “demonstration that specified requirements relating to a product, process, system, person or body are fulfilled” Confidence in conformity assessment – international acceptance to facilitate trade - accreditation

3 PROVISION IN TBT AGREEMENT “Members shall ensure, whenever possible, that results of conformity assessment procedures in other Members are accepted…adequate and enduring technical competence of the relevant conformity assessment bodies in the exporting Member, so that confidence in the continued reliability of their conformity assessment results can exist; in this regard, verified compliance, for instance through accreditation, with relevant guides or recommendations issued by international standardizing bodies shall be taken into account as an indication of adequate technical competence” Article 6

4 ACCREDITATION Third-party attestation related to a conformity assessment body conveying formal demonstration of its competence to carry out specific conformity assessment tasks – ISO Conformity assessment bodies – Certification bodies/ Inspection bodies/Labs QCI – responsible for national accreditation structure International Accreditation Forum (IAF) – Pacific Accreditation Cooperation (PAC) - NABCB member from India International Laboratory Accreditation Cooperation (ILAC) – Asia Pacific Laboratory Accreditation Cooperation (APLAC) - NABL member from India Basis of accreditation – generally international standards on conformity assessment developed by ISO/ IAF or ILAC guidance documents

5 INTERNATIONAL EQUIVALENCE Accreditation Bodies to comply with ISO – Peer Assessment – signatory to MRAs NABCB - Signed PAC MLA for QMS – Aug 2002;IAF MLA for QMS – Sept Signed PAC MLA for EMS – July IAF MLA for EMS – Oct 2007 NABCB accreditation equivalent worldwide and certificates with NABCB logo acceptable internationally To work for MLA in Inspection and Product certification NABL – signatory to ILAC/APLAC MRAs for Testing and Calibration Labs since 2000; APLAC MRA for medical labs in Dec 2008

6 ACCREDITATION STANDARDS ISO CASCO - ISO's policy development committee on conformity assessment  ISO Requirements for Management Systems CBs  ISO Requirements for CBs for FSMS - basis for operation of CBs as well as their accreditation – cross refers to ISO  ISO Requirements for Testing labs  ISO Guide 65 Requirements for Product CBs – covers Products, Process or Service certification  ISO Requirements for Inspection Bodies

7 Accreditation Standards Accreditation Body for Certification Bodies/ Inspection Bodies ISO/IEC Guide Accreditation Body for Laboratories ISO/IEC Certification Body for Products ISO/IEC Guide 65 Certification Body for Management Systems ISO Certification Body for Personnel ISO/IEC Certification of Products Certification of Management Systems Certification of Personnel Testing and Calibration Laboratories ISO/IEC & ISO Testing and Calibration Consumers receiving certified products/services Inspection Bodies ISO/IEC IAF / ILAC

8 BENEFITS OF ACCREDITATION Recognition of certification/inspection/ testing by Indian conformity assessment bodies in other countries – certificates/test reports issued by accredited CABs accepted worldwide – basis for G to G MRAs Reduces risk for government, business and customers - ensures through regular surveillance that Conformity assessment bodies are both independent and competent Lower cost of accreditation – in turn lower cost of certification/inspection/testing for industry – enhances competitiveness

9 EMERGING STRUCTURE Government (to enact legislation) Regulatory Bodies – may be sector specific like Food, Drugs (to enforce the law) Accreditation Body (technical competence of CABs) Conformity Assessment Bodies (CABs) (support regulation – voluntary certification/quality assurance) Manufacturers and Service providers Common man – recipient of goods and services

10 Supply Chain in Conformity Assessment International Accreditation Forum Accreditation Body Certification Body / Inspection Body “The organization” (Your Supplier) “The Customer”

11 INTERNATIONAL TRENDS Regulatory standards – Regulatory bodies increasingly seeking accredited CABs – example - EC Regulations for CE marking – India Singapore MRA – electrical/electronics/ telecom products – accreditation prerequisite Voluntary standards – market driven – ISO 9001/ISO 14001/OHSAS/ISMS - accreditation to international standards is market driven need – almost compulsion EC Regulation – legislation on accreditation in July 2008 – wef 1 Jan 2010 – single national accreditation body – public body, non profit, non competition – accreditation moving from private activity to governance – poised to impact worldwide

12 PNGRB regim PNGRB – using 3 rd party inspection bodies as a policy – MoU with QCI – accreditation services for organizations for developing standards as well as checking compliance to the notified standards the entities regulated by PNGRB – 16 Inspection bodies provisionally recommended to PNGRB - this would include design verification, monitoring during construction and laying stage and post commissioning stage 3 IBs already accredited and 10 are in the process of NABCB accreditation

13 Support to Govt. India-Singapore MRA – use of NABCB accredited bodies for certification of electrical/electronics/telecom products prescribed under the Schemes of DGFT, EIC and TEC – this is in line with international practice that inspection/testing/certification in one country is accepted by the other based on accreditation India-EC Agreement - similar provision is being made in the India-EC agreement which is under negotiation PNGRB – using 3 rd party inspection bodies as a policy – MoU with QCI – the entities regulated by PNGRB would have to use accredited inspection bodies to check compliance with regulations – 16 Inspection bodies provisionally recommended to PNGRB - this would include design verification, monitoring during construction and laying stage and post commissioning stage

14 Support to Govt. FSSAI helping develop system of recognizing food safety audit agencies and labs – basis would be NABCB/NABL accreditation – basic food safety systems standard also being developed for FSSAI inspection of 800 plus registered dairy units under MMPO – annual inspection for sanitary and hygienic conditions required – provision for using outside bodies – FSSAI decision to rely on accredited bodies

15 Developing voluntary product certification scheme for Deptt of AYUSH for AYUSH products – Draft scheme on website for public comments – huge endorsement by industry - likely launch Oct 2009 – two levels – AYUSH Standard and premium marks – latter based on international norms – ultimate aim to gain acceptance by overseas regulator for certified products Developing voluntary certification scheme for medicinal plants for National Medicinal Plants Board based on good agricultural/collection practices and product requirement like purity, contaminants etc. – draft standards being developed - likely launch January 2010 Support to Govt.

16 Infrastructure projects – simplified scheme for provisional approval of third party inspection bodies based on technical competence announced wef 1 July 2009 for one year pending formal accreditation as per ISO – can cover design verification, construction and post construction monitoring 10 IBs approved under the scheme Gujarat Govt first to request QCI help – scheme for registration of IBs based on NABCB accreditation PWD, Delhi for roads and buildings Jharkhand – Roads under PM Grameen Sadak Yojana (PMGSY) Chandigarh Housing Board Need to integrate in programmes like JNURM or PMGSY

17 Support to Govt. Assisting WDRA in developing system for warehouse certification and grading of agri commodities - accredited certification and inspection bodies to be used (Scheme already in operation and 5 CBs recommended to WDRA and 7 are in process)

18 ISO Administrative requirements – legal entity, liability, independent accounts Independence - Type of Inspection Body Confidentiality Organization and Management Quality System Personnel Facilities and Equipment Inspection Methods and Procedures Handling Inspection Samples and Items Record Inspection Reports or Inspection Certificates Subcontracting Complaints and Appeals Cooperation

19 PROCEDURE BCB 201(IB) – Procedure – legal entity in SAARC, two inspections in technical area, int audit and MR, doc review (2 MD), OA – 4 MDs, witness of 2 inspections on site, key offices, optional preliminary visit Initial accreditation for three years – renewal 4 years Suspension, Withdrawal

20 ABOUT QCI Established in 1997 by a Cabinet decision – in partnership with CII, FICCI, ASSOCHAM Autonomous body – regd as society - Chairman appointed by PM (Ratan Tata, Venu Srinivasan, Dr. R.A.Mashelkar) Provide accreditation structure in the country Spread quality movement in India – assigned National Quality Campaign funded by Govt Provide right and unbiased information on quality & related standards Represent India’s interest in international fora Help establish brand equity of Indian products and services

21 STRUCTURE OF QCI QUALITY COUNCIL OF INDIA NATIONAL ACCREDITATION BOARD FOR CERTIFICATION BODIES (NABCB) NATIONAL BOARD FOR QUALITY PROMOTION (NBQP) NATIONAL ACCREDITATION BOARD FOR TESTING AND CALIBRATION LABORATORIES (NABL)* NATIONAL AACREDITATION BOARD FOR EDUCATION AND TRAINING (NABET) NATIONAL ACCREDITATION BOARD FOR HOSPITALS AND HEALTHCARE PROVIDERS (NABH) * CURRENTLY INDEPENDENT BODY

22 Sum Up 3 Pillars Requirements to be met with – STANDARDS Checking compliance to standards – CONFORMITY ASSESSMENT Competent bodies to check compliance – ACCREDITATION Possible to design regulatory or voluntary systems

23 INFORMATION ON ACCREDITATION Quality Council of India 2nd Floor, Institution of Engineers Building 2, Bahadur Shah Zafar Marg New Delhi INDIA Tel : /9260/0567/8057/8837/38 Fax: Website :

24 Thank You.


Download ppt "Accreditation of party for undertaking third party Disaster Management Inspection Mrutunjay Jena Deputy Director (NABCB) QUALITY COUNCIL OF INDIA New Delhi."

Similar presentations


Ads by Google