SIP-Based-DECT Rev1.4 03　DEC. 2012.

SIP-Based-DECT Rev 　DEC

Table of Contents 1. Overview 2. Specification and Features
3. Air Synchronization　 4. Registration 1. Installation Basic Flow 2. CS radio zone design 3. CS/PS Firmware Update 4. Setup CS/PS and NS1000 5. Maintenance of System phone book Appendix - PS Ring Group Air Synchronization Site Survey (Tool) - PS function List 2

Chapter 1 Overview Chapter 1: Product Overview . 3

1. Overview (Why SIP-Based DECT)
In Expensive Wireless solution with SIP based DECT solution High Quality Voice with Noise reduction Dramatically Reduce Wire installation cost in large service area. Easy install and maintenance with Firmware Air-download No separate server or GW is required with NS1000, Offer high-quality Business Communication, with most Reliable DECT Technology. LAN Spec. Radio technology DECT　 VoIP signaling SIP Number of Handsets Max. 255 handsets *1 Number of CS Max. 128 CS Max. 32 CS/8Air sync group CS synchronization Air synchronization Handover Yes (seamless) Cell Station Cell Station

1. Overview (Hand Over) SIP based DECT phone satisfies needs of personnel who want to be always ready to talk to partners or customers anywhere and anytime within their company. NS1000 <Cell Station> <Cell Station> 共通内容メモ削除 Hand Over <PS> <PS> <PS> <PS>

1. Overview Multi Zone PS can be reception which is located anywhere.
The whole building becomes the communication zone. Retail Store Features and Benefits Office Hallways On-site employees: efficient because it is not necessary to return to the office to make a call. Hand-over Automotive Dealership Call receptionists: less trouble because the person to transfer the call to can be anywhere. Customers: improved CS because there is less time spent waiting to transfer calls. Factory Meeting Room Storage Suitable Environments Frequent moving about inside the company 6

1. Overview Move to other System/Location
PS can be moved from original site to the other site. In this condition, the PS must be resisted to other unit also PS can be resisted up to 4 different Cell Station (Need to regist NS1000 also) Master Units Slave Units IP <Cell Station-1-> <Cell Station-2-> A PS Ring group is a group of PS extensions that receives incoming calls. When a call arrives at the PS Ring group, the member PSs simultaneously ring. (AN1)A virtual extension number, called a Floating Extension Number, is assigned to each PS Ring Group. (AN2)By setting the destination of incoming calls to the Floating Extension Number, calls are distributed to the corresponding PS Ring Group. (AN3)Also, a PS can belong to more than one PS ring group. For example, (AN4)PS04 is a member of group 1 and group 2. (AN5)Next we will explain the differences between a PS Ring Group and an ICD Group. When calls arrive at the PS Ring groups, only one channel is used for each PS Ring Group. Also, PS users in the PS Ring Group cannot use the Login/Logout and Wrap up features. Move with PS to other site <PS201> <PS301>

Specification and Features
Chapter 2 Specification and Features Chapter 1: Product Overview . 8

2. Specification and Features
Portable Station (Standard Model) KX-UDT111 - High quality wideband voice - Noise reduction -Full-duplex hands free　 -Air-download of firmware - Headset jack (2.5mm plug) - Vibration - Up to 500 personal phonebook US/CANADA Model EU Model

Portable Station (Slim & Light Model) KX-UDT121 *Future - High quality wideband voice - Noise reduction -Full-duplex hands free　 - Air-download of firmware - Headset jack (2.5mm plug) - Vibration - Up to 500 personal phonebook - Bluetooth （Version 2.0, Class 2）(Headset/Phonebook transfer） *LCD back light off and Bluetooth is not in use. US/CANADA EU Model

Portable Station (Taught Model) - High quality wideband voice - Noise reduction -Full-duplex hands free　 - Air-download of firmware Vibration Against Hazard LevelIP65 (IEC529) - Up to 500 personal phonebook - Bluetooth （Version 2.0, Class 2）(Headset/Phonebook transfer） KX-UDT131 *Future *LCD back light off and Bluetooth is not in use. US/CANADA EU Model

Cell Station KX-UDS124 *Future - Web interface for set up - Air-download of firmware - Max PS registration : Up to 255 per CS and System - The number of Cell Station for a system : Up to 64 or 128 (One Look networking) (32 per air sync group/max 8 air sync group) - PoE or optional AC adaptor(KX-A239)

PS Detail Specification KX-UDT111 KX-UDT121 KX-UDT131 LCD 1.8”, 65,000-color TFT display LCD Backlit Yes Bluetooth No Built in Vibration Quick Charge No（10Hours) Yes (3 Hours)　 Yes (3 Hours) Talk Time 12h (Narrow band) 9h (Wide band) 14h (Narrow band) 11h (Wide band) Stand bay time 200h DECT Encryption Soft Key 3 Size (HxWxD) 146.3x48x25.4 mm 127.5x48.5x18 mm 152 X 55 X 23mm Weight 115g 90g 150g Battery AAA-Ni-MH 2 cell Battery： Li-ion 3.7V 700mAh Battery： Li-ion 3.7V 700mAh Enclose AC Adaptor, Charger Belt Clip and Holder

330g (Include wall mount adaptor)
2. Specification and Features CS Detail Specification Model No. KX-UDS124 Type 4ch wideband audio CS Max. simultaneous calls 4 Wideband Audio Yes Power supply PoE (IEEE 802.3af) AC adaptor（optional） CODEC (IP) G.722, G.711, G.729a LAN port 10 base-T / 100 base-TX Firmware upgrade DECT Encryption Seamless Handover Size 190×133.9×39.3 mm Weight 330g (Include wall mount adaptor)

CS Detail Specification LED indication on CS LED Display Status OFF Power Off / CS software download Green ON Standby (no active calls) Slow Green Flashing Talk (active calls) Moderate Green Flashing Busy (All talk path are occupied) Red ON Fault Slow Red Flashing OUS/Start up (data link establishment  air synchronization) Moderate Red Flashing Start up (power on  data link establishment) Amber ON Standby: unstable synchronization (no active calls) Slow Amber Flashing Talk: unstable synchronization (active calls) Moderate Amber Flashing Busy: unstable synchronization * Note) LED flashing patterns are as follows: Slow Flashing: 60 times per minute Moderate Flashing: 120 times per minute

CS Detail Specification Error Indication and how to recover

System Capacity System Capacity Stand-Alone Stacking system Networking Main One Slave Two Slave Extension 640 1000 IP PS(UDS1XX) 255 Legacy 2 36/96/128/240(*1) 72/192/256/480 (*2) SLT 36/96/128/160(*1) 72/192/256/320(*2) DPT CS (pcs) 64 128 CS-IF (4/8)Card 4 8 16 DPT-CS 11/32/32/32(*1) 22/64/64/64(*2) IP-CS SIP-CS(UDS124) PS　(WT/TCA) 512 *1: MM/NN/XX/YY means One NCP/One TDE100-TDA100/OneTDE200-TA200/OneTDE600-TDA600 *2: mm/nn/xx/yy means Two NCP/Two TDE100-TDA100/TwoTDE200-TA200/TwoTDE600-TDA600

2. Specification and Features (Cover Area)
CS Coverage Area for Establishing Conversation Using PSs A Coverage Area: (About 50m to 60m) A B Good Coverage Area: (About 30m to 40m) Good sound quality can be maintained. B C Out of Service: Cannot make/receive calls. Gray Zone: Conversation will be intermittent C

2. Specification and Features (Easy Installation)
Site Survey for Air Synchronization SIP-CSs have ability of site survey to check radio signal strength. By the LED on SIP-CS, you can check the radio signal Set Temporally master CS for site survey as planned - Power on CS with pressing rest SW . - Release Reset switch while LED flashes (Green/Red/Amber) - Press Rest Switch one second once again (Green and Red LED start flashing) 2. Turn on Power of slave CS and locate it, then check LED on CS. Move Slave until LED on Slave CS goes green See Appendix in more detail

2. Specification and Features (Easy Installation)
Site Survey for S-PS Service Area The PS has a PS AREA CHECK ability User can confirm CS cover area easily by this function Power ON CS and set Maintenance mode Change PS to PS AREA CHECK mode Make call from PS to PS See Appendix in more Detail

Better Receiving Frequency Response (Panasonic PBX terminal)
2. Specification and Features Wideband Audio Support Better Receiving Frequency Response Clear & Natural voice by Wideband Audio. Multi Handsets and Multi-Cell supported. Human voice Range Narrow Band (G.711) Enhance Enhance Wide Band (G.722) Enhance the Lower frequency with small receiver Enhance the High frequency by aperture rate of the receiver previous model (Panasonic PBX terminal) UDT111 UDT121 U P aperture rate 4.3 % aperture rate 35 % aperture rate 24.5 %

2. Specification and Features (Pattern1)
Noise Reduction features Can configure TX/RX noise reduction to ON/OFF during standby and talk (Default : OFF). TX : Noise Reduction for Sending Signal Detect and reduce noise part from the transmission voice Noise sound Noise reduction Voice Noise RX : Listening Enhancement for Receiving Signal Dynamic receiving volume control according to acoustic ambient noise characteristics Noise sound High noise 　 High volume Low noise　　 Normal volume Waiting Demo Voice file ***

Advanced error correction makes stable communication.
2. Specification and Features (Pattern1) Noise Reduction features Strong against the multipath environment by the enhanced precision of error detection and new voice processing technology. Panasonic Technology Multipath Fading Ex) cubicle farm, concrete building The fading occurs when moving the place where the electric wave is strengthened or weakened each other under multipath environment. Example Error Received RF power at cordless handset under multipath environment. High Less occurrence multipath by direct/ reflected/diffracted wave, etc Low Freq Error [Time] Direct wave PS Voice waveform Old Proprietary Process CS New Reflected wave Diffracted wave Advanced error correction makes stable communication.

KX-UDT111 Appearance CONCAVE Large Ringer / Charge LED Receiver Enhance aperture rate aperture rate 4.3% (previous model) U P Strap hole1 Belt clip hole aperture rate 35.0% (UDT111) Shape to avoid operation mistake in the pocket - Shape to protect keys Concave shape and rippled keys for easy access to keys 1.8inch Color LCD with backlit 3 Soft keys Headset Connection Navigation key Wall mountable charger Key backlit Microphone Strap hole2

KX-UDT121 Appearance Enhance aperture rate Pocket size Ringer / Charge LED （48.5ｍｍ） Receiver （18ｍｍ） aperture rate 4.3% (previous model) （90g） Strap hole1 Belt clip hole 1.8inch Color LCD with backlit U P Headset Connection 3 Soft keys aperture rate 24.5% (UDT121) Navigation key （127.5ｍｍ） Plating Grill Section keys Wall mountable charger Key backlit Strap hole2 Microphone

Chapter 3 Air Synchronization Chapter 1: Product Overview . 26

3. Air Synchronization Air Synchronization
To activate Handover through CS, all CS must be synchronized. CSs are synchronized by using “Air Synchronization” for same air Sync. group After CS synchronized with other CS, Handover is available. LAN i/f L2 SW CS (Master) Air Synchronisation Handover is not Available Handover is available CS (Slave) Air Synchronisation Handover is not Available Synchronised By Air Synchronisation CS (Slave)

You must not install SIP-CS without site survey.
3. Air Synchronization CS Coverage Area for Air Synchronization between CSs You must not install SIP-CS without site survey. A Coverage Area: Radio signal strength level is between “03” (about 50m to 60m) and “14” (about 20m to 30m). A B Good Coverage Area: Radio signal strength level is between “05” (about 40m to 50m) and “14” (about 20m to 30m). Good synchronisation quality can be maintained. C B C Out of Service: 0m to 3m or the radio signal strength level is “00 to 02”. Cannot be synchronized. Gray Zone: Conversation will be intermittent C

Chapter 4 Registration Chapter 1: Product Overview . 29

4. Registration Step for DECT System Installation
Following is Step for SIP based DECT system registration 1) Instauration Basic Flow 2) CS Radio Zone Setting (Site Survey) Step0: Initialing CS Step1: Site Planning Step2: Site Survey Step3:CS Registration into Master CS （By CS-web) Step4: Site Survey 3) Firmware UP date Step1: Local firm Update 4) Set up CS/PS and NS1000 Step1:Virtual Extension (UT) Install Step2:Step up Terminal Type Step3: Entry CS/PS name and FF-Key Step4: Entry CS and PS extension Number)

4. Registration Step for DECT System Installation Continue
4) Set up CS/PS and NS1000 Step5: Set up Master CS Step6: Set up System information URL Step7: PS registration Step8: Set up Slave CS Step9: Set up Master CS of other Air sync group Step10: Set up Slave/Master CS to NS1000 (For Ring group) 5) Set up CS/PS and NS1000

4. Maintenance of System phone book
4.1. Installation Basic Flow Basic Flow how to set up CS/PS and regist to NS1000 1. CS radio zone design (Site Survey) 1-1. Site Planning 1-2. Site Survey 1-3. CS Registration into Master CS （By CS-web） 1-4. Tree Survey 2. Firmware Update 2-1. Manual Update 3. Setup CS/PS and NS1000 3-1. NS1000 setting by Web-MC 3-2. Super Master CS setting by CS-Web 3-3. PS registration 4. Maintenance of System phone book 5. PS Ring group setting (see Appendix)

4.2. CS Radio Zone setting Step1: Initialize CS for Before Registration Before CS/PS registration, following process must be done 1. Initialize CS 1. Depress RESET Switch while CS is power on 2. Keep pressing RESET Switch 10 sec. And wait around 60sec until LED turn on green 2. Open CS-Web interface Depress RESET Switch and turn on CS power Keep pressing RESET until LED blink amber

PBX Support Page of CS-KMS(TBD)
4.2. CS Radio Zone setting　（課題あり） Step1: Site Planning Plan the CS position by using Site planning tool - Site planning tool (Excel) Local PC PBX Support Page of CS-KMS(TBD) 2. Plan & Check CS position 1.　Down Load 1) Download Site planning tool (Excel) from PBX Support Page of CS-KMS.(TBD) (最終化？） 2) After you Import site map data to this tool and determine the size scale, you can plan the CS position and check the radio range of CS. (simulate for CS positioning) 2. Determine size scale 2. Import site map data

4.2. CS Radio Zone setting Step2:Site Survey
Locate CS as temporarily position by using LED indication 1) Keep Pressing SW and turn on the CS. 2) Release the SW button and depress it again. ⇒ Sync Master mode for Site survey starts. SyncMaster mode 3) Other CS(s) synchronize to Sync Master CS automatically 4) Check other CS’s LED * Confirm the CS radio status at planning position 5) Change position until being Green LED Slave Slave Change Position Slave Slave Slave 6) Depress the SW button again. (return to Slave) LED LED ■ Green OK ■ Amber NG (poor) ■ Red NG (out of range)

4.2. CS Radio Zone setting Step3:CS registration in to Master CS
CS Registration into Master CS by CS-Web CS-Web 2. 4. 1. 5. Super Master 3. Slave Slave 1. Change “CS Class” from “Slave” to “Master” via CS-Web. 2. Push “Start CS Registration” button in CS Management screen. 3. Each CS synchronizes to neighbor CS. 4. Each CS sends it’s information to Super Master CS. 5. CS(s) that is registered in Super Master are listed up. Slave Slave

4.2. CS Radio Zone setting Step4:Tree Survey
Tree Survey (Auto Air Synchronization) by CS-Web or PC Tool 1) Push “Start Tree Survey” button via CSWeb. 2) System executes auto air synchronization and calculate Tree structure. 3) Push “Apply” button. Web user interface (Web application) CS-Web - For small system - No installation needed 1. 3. . Auto Air Synchronization Super Master CS-MT (SIP CS Management Tool) - For mid and large system - Installation is necessary Slave2 Slave1 Slave3 Slave4 Slave5 Note: In case that # of CS are up to 9, PC tool needs to be used for tree-survey.

4. 3 Firmware Update Step1:Update firmware by CS-Web
you can perform the firmware update manually using Web user interface programming. After the firmware is uploaded to the Super Master CS, the Super Master CS distributes the firmware to all other SIP-CSs. 1.Upload new firmware 追加必要　図Cut&Past CS-Web 2. Deliver to all CA 1. Get in to [Firmware Update]. 2. Select [Direct] for [Update Mode]. 3. Click [All Update Firmware]. Note: You must update CS firmware to V2.XX, when you use CS under NS1000

4. 4 Set up CS/PS and NS1000 Step1:Vitrula Extension (UT) install
Click [Setup]  select [PBX Configuration] – [1.Configration] – [1.Slot]  [Virtual] – [V-UTEXT32]

4. 4 Set up CS/PS and NS1000 Step2: Set up Terminal Type
Set up CS or PS type of Telephone type in Port Property as Master CS/SIP-CS or S-PS Click [Set-up] - [1.Configlation] - [1. Slot] – [Select Target V-UTEXT32] – [Port property] Note: 1. Telephone Type Setting is Master CS: Super master CS which is Master CS of Air Sync Group #1 SIP-CS : Master CS of Air Sync Group 2 to 8 and or all slave CS　 S-PS : PS 2. Only one Master CS can be set per one Unit　　 3. Do not need to set UP SIP-CS if customer does not need to set up PS-Ringing (ICD-Group Function)

4. 4 Set up CS/PS and NS1000 Step3: Entry CS/PS name and FF-Key
Enter Name of PS　and Extension number Click [Set-up] - [1.Configlation] - [1. Slot] – [Select Target V-UTEXT32] – [Port property] Enter PS Name 2. Enter FF-Key of PS Click [Set-up] - [4. Extension] - [1.Wired Extension] - [4. Flexible Button] – [Target PS ] Can be set these Functions Enter FF-Key Code Note: Set up PS related programming by wired extension setting if needed

4. 4 Set up CS/PS and NS1000 Step4: Entry CS and PS extension Number
Enter Name of CS and Extension number Click [Set-up] - [1.Configlation] - [1. Slot] – [Select Target V-UTEXT32] – [Port property] Note: 1.Need to assign Super Master CS number for PS registration It will not need AK (Capacity of UT-Extension) for CS but need AK for PS

4. 4 Set up CS/PS and NS1000 Step5: Set up Master CS
CS-Web LOGIN Default Web Address ( ) Super Master CS For CS and PS registration, need to set up Super Master CS Login CS-Web ( as a default) In default setting, CS-Web site is set as 2) Set up own IP Address In default setting, CS is defined as DHCP mode. If no DHCP server, need to set up own IP address. After IP Address, CS will restart automatically 3) Set CS mode as Mater CS In default, CS mode is set as Slave CS, so need to set CS mode as Master CS . After set Master CS, CS will restart automatically Note: *1 To enable CS-Web function, need to proceed power on with reset SW (See Page 28) 　　　　 Login/Password : For Installer instoperatoruserid/instpass, For Customer admin/adminpass

4. 4 Set up CS/PS and NS1000 Step6: Set up System information URL (in Master CS) In order to download configuration file from NS1000, URL information for getting the file in NS1000 has to be set by CS-Web. 1) Set following URL into System File URL Then, Click All Save. After set up URL, CS will restart automatically. Note: At this point, configuration data is downloaded into Super Master CS and registrated to NS1000 automatically even if registration mode is [manual] mode in NS1000 　　　 Do not enter any other field NS1000 IP address Port #

4. 4 Set up CS/PS and NS1000 Step7: PS Registration
CS-Web LOGIN Regist Super Master CS PS PS has to be registered into Super Master CS by CS-Web as follows: Login CS-Web Select menu of PS Registration. Click Start PS Registration. Select Available PS and move to Selected PS by “>” button. Click Next. Set PS to registration mode and register that to neighbor CS. *registration mode = push button on PS. 7) Any CS accept PS registration.　　 Note: 1. Extension Number is downloaded from NS 1000 automatically, and also when change PS extension number by Web-MC of NS1000, the modification data is also down loaded automatically 2. After regist PS to CS, CS-Web will be closed. After Close CS-Web, can open Web Port by PS setting

4. 4 Set up CS/PS and NS1000 Step8: Set up Slave CS
CS-Web of Slave CS CS-Web LOGIN LOGIN Regist Super Master CS Slave CS Set up Slave CS IP address Set up Master IP address * Slave CS can regist to Super Master CS. Just Set up own IP address (*) Then proceed CS registration by Super Master CS Note: If System Mode is set up as DHCP enable, do not need to set up Own IP-Address CS-Web of Super Master CS Start CS registration in Super Master CS

4. 4 Set up CS/PS and NS1000 Step9: Set up Master CS of other Air sync group CS-Web of Master CS CS-Web LOGIN LOGIN Regist Set up Master CS IP address Set up Super Master IP address * Super Master CS Master CS Master CS can regist to Super Master CS　Just Set up own IP address and Super Master IP address * And need to proceed CS registration by Super Master CS Note: If System Mode is set up as DHCP enable, do not need to set up Own IP-Address When set up different Air Sync Group (Not 1), then need to set up Master IP Address CS-Web of Super Master CS Start CS registration in Super Master CS

WEB-MC UT-EXT32 Port property
4. 4 Set up CS/PS and NS1000 Step10: Set up Slave/Master CS to NS1000 (For Ring group) CS-Web LOGIN WEB-MC UT-EXT32 Port property Regist Super Master CS Slave CS When user want to use PS-RING group by NS1000 ICD Group function, Must regist Master CS and Slave CS to NS 1000 as follow Set UP Telephone Type as SIP-CS and Extension Number in Web-MC Set up Extension number of Master CS/Slave CS in CS-Web as same as NS1000 Data Set up Password (1234 as default) in CS-Web

4.5 Phone book registration
Download System Speed Dial data to PS Phone Book Step Download System Speed dial data to Super Master When System Speed dial of NS1000 is modified, NS1000 will download System Speed dial data to Super Master CS. Master CS will deliver Data to PS /Other Master CS as Phone book data, after complete download. The total number of downloaded data is defined by [Site-Property] Note: 1. It will take around 40second to deliver Phone book Data. which is same setting for UT. Default is 300 *1 2. PS will show [Downloading PhoneBook ] as download mode as download mode. 3. Download will start when either [Apply] or [OK] ICON is clicked 4. Can not set Tennant group for PS, so basic Speed dial data is shared by all PS *1: It will take around 5 minutes to complete Phonebook transfer as MAX(256 PS is in One Cell Station) Download Deliver

Appendix

Appendix PS Ring Group #1 (How to work) 1 NS1000 setting by Web-MC 2
Assign CS extension number in NS1000 - Virtual V-UTEXT Port Property Set ICD group - ICD Group Setting EXT. Status 200 INS 201 300 301 ICD group Member 600 300, 301 601 3 CS setting by CS-Web 4 CS setting by CS-Web Assign CS extension number in each CS Assign member of PS Ring group in S-Master CS Extn.300 Extn.301 Index # Group # Member 1 600 P001, P002 2 12 PS Index=P001 Extn.200 PS Index=P002 Extn.201

Set CS number as ICD-G member
Appendix PS Ring Group #2 (How to set up) 1. Assign CS extension number Extension numbers must be assigned to all CSs in the same way of UT series SIP phones - Setup- PBX Configuration 1.1 Slot - Virtual V-UTEXT Port Property Set CS number as ICD-G member 2. Set ICD group Extension number of CSs to cover area for PS ringing need to be set in a ICD group as the member. - Setup-PBX Configuration ICD Group Setting ACD: Automatic Call Distribution Note: About CS registration into NS1000 No operation is required for registration into NS1000 like as PS. Registration will be completed automatically when match CS extension number and password on CS with the number on NS1000

Appendix PS Ring Group #3 (How to Set up)
3. Set CS extension number by CS-web Each CS must assign their extension number for PS ring group. Installer needs to log-in into each CS for this setting. 3-1. How to access to each CS Each CS can be logged in from CS-web of Super master CS as follows: 1) Select menu of CS Management. 2) Click Remote Login button for CS that you want to log-in. 3-2. Set extension number in each CS Following items need to be set in each CS when login to CS. 1) Select menu of SIP Settings - CS. 2) Set CS’s extension number into phone number 3) Set Authentication ID (CS’s extension number) 4) Set Authentication Password (“1234”) than, Click Save.

Appendix PS Ring Group #4 (How to Set up)
4. Set PS Ring Group by CS-web PSs are assigned as group member by CS-Web. The setting is required only for Super Master CS. 1) Select menu of PS Ring Group Settings 2) Click PS group registration button of specified group 3) Select PSs from Available Users and move to Group Members by “>” button. 4) Click “All Save” (Setting data is delivered to all CS) 1 2 ACD: Automatic Call Distribution 3 4

Air Synchronization Air Synchronization Mater and Slave CS
SIP Based DECT-CS (Mater CS) An CS configured as Master CS will create and send out its own timing and synchronisation. SIP Based DECT-CS (Slave CS) An CS configured as Slave CS will receive timing and synchronisation from CS set to Master CS.

Air Synchronization Condition of Air Synchronization
SIP Based DECT-CS Classification CSs are assigned to any one of the following three classifications for Implementing air synchronization. CS Class Description Master CS1 (synchronization source clock) Generates clock signal. Master CS2 (backup for Master CS1) - Receives clock signal from Master CS1 - Can also generate clock signal if Master CS1 malfunctions. Slave CS Receives clock signal from other CSs. Master CS1 Slave CS Slave CS Slave CS Slave CS IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない） Level 1 Level 2 Level 3 Level 4 Level 1 It is recommended that the number of levels in the synchronisation hierarchy is minimized for stable air synchronisation. The maximum number of levels is 4. Master CS2

IP-CS Air Synchronization
Condition of Air Synchronization Onelook Network Slave CS registered to Slave Unit can NOT Air synchronize with Master CS registered to Master Unit, so it is necessary to install additional Master CS to Slave Unit. Master Unit Slave Unit Onelook Network Master CS Slave CS Slave CS Master Unit Slave Unit Onelook Network Master CS Slave CS Master CS Slave CS Air Synchronization Group1 Air Synchronization Group2

Site Survey (CS) Set up Temporally CS

Site Survey (CS) Locate Slave CS

Site Survey (PS) CS Cover area check

Site Survey (PS) How to set CS as Maintenance Mode

PS Function List Detail Function LIST (1) PS Function
Following table show PS function Overview Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) DID/DIL incoming call Yes Internal Call Block Ring Tone Pattern Selection Selected by PS Menu Call Waiting No 'Call Waiting Caller ID' on display; Idle Extension Hunting Outside Destinations in ICD Queuing Feature 'Hurry-Up' key is not available. VIP Call Log-in/Log-out FF key has to be programmed in both CS and NS1000 for SIP-DECT Call Forwarding (FWD) Do Not Disturb (DND) FWD/DND Button, Group FWD Button 'Group FWD' key is not available. IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

Detail Function LIST (2)
Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) Line Preference. Incoming Yes No Call Pickup - Directed, Group Hands-free Answerback Automatic Extension Release Emergency Call Account Code Entry Dial Type Selection Pause Insertion 'Pause' key is not available.. Line Preference. Outgoing FF key has to be programmed in CS and PS Trunk Access One-touch Dialing Last Number Redial Speed Dialing. Personal/System Personal Download: N/A for SIP-DECT Hot Line IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) PDN/ SDN Yes No Automatic Callback Busy Alternative:Use CA instead Executive Busy Override Future Call Monitor Call Waiting Tone Off-hook Call Announcement Whisper OHCA Toll Restriction (TRS) Call Barring (Barring) Budget Management Extension Dial Lock Dial Tone Transfer Walking COS Verification Code Entry Automatic Route Selection Hands-free Operation Off-hook Monitor Mute IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) Headset Operation Yes Data Line Security NO Flash/Recall/Terminate Yes* External Feature Access Trunk Call Limitation Drop the call without alarm (CPC) Signal Detection Call Transfer Call Hold Call Park FF key has to be programmed in both CS and PS Call Splitting Music on Hold Conference SIP-MLT/SLT: hard "Conf" key, no LED, SIP-DECT: Function Menu, no LED」 Privacy Release No Paging SIP-SLT and SIP-DECT can not be paged IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) Conference Group Call Yes SIP-MLT/SLT SIP-DECT can be a coordinator Door phone Call Door Open Trunk Answer From Any Station No Background Music (BGM) Outgoing Message (OGM) Direct Inward System Access External Sensor External Relay Control Caller ID Incoming Call Log Message Waiting Absent Message No absent message information on LCD while calling. IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) Fixed Buttons Yes Same limitation as UT Flexible Buttons No LED Indication Display Information Calling/Connected Line Identification Presentation Advice of Charge (AOC) No Charge information on LCD. Built-in SVM Voice Mail (VM) Group Voice Mail DTMF Integration 2WAY-REC 2WAY-Transfer VM-Transfer Live Call Screening (LCS) IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) PS Ring Group - Yes PS Directory PS Feature Buttons Wireless XDP Parallel Mode Only support parallel ringing SMDR Printing Message No Call Charge Services Call Billing for Guest Room Extension Personal Identification Number Extension Feature Clear Walking Extension Enhanced Walking Extension Timed Reminder IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) Confirmation Tone Yes Calling/Connected Line Identification by QSIG COLP/CONP is not available. Call Forwarding (CF).by QSIG Call Transfer (CT) by QSIG Completion of Calls to Busy Subscriber (CCBS).by QSIG No Network Direct Station Selection Centralized Voice Mail Network ICD Group Peer-to-Peer Connection Self Labeling Computer Telephony Integration Following enhanced CTI functions are not available -SetDisplay -ButtonPressetc. Communication Assistant IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

Feature NT 3XX SIP based Remark for SIP DECT SIP-MLT UT13X,2XX SIP-SLT UT133,123 SIP-DECT (UDS1XX) Class of Service (COS) Yes Group Tenant Service Time Service Limited Only do "change the time mode (Day/Night/Lunch/Break)“ by feature access code. Operator Features Manager Features No System Redundancy Terminal redandancy Require to set an external NTP server. Stand alone operation IP-CSはクラス分けが必要。レガシーCSがなく、IP-CSが1台しかないところでは、IP-CSはマスターCSにクラス分けされる。 IP-CSが2台しかない場合は、1台がマスターCS1になり、もう1台はスレーブCSになる。（マスターCS2は作らない）

END 20121107-01 SIP based DECT_Rev1.2_7Nov_fukuda.pptx - 1st release
SIP based DECT_Rev1.3_2Dec_fukuda.pptx - Change #66 Time service line 　 SIP based DECT_Rev1.4_3Dec_fukuda.pptx END

SIP-Based-DECT Rev1.4 03　DEC. 2012.

Similar presentations

Presentation on theme: "SIP-Based-DECT Rev1.4 03　DEC. 2012."— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

SIP-Based-DECT Rev1.4 03 DEC. 2012.

Similar presentations

Presentation on theme: "SIP-Based-DECT Rev1.4 03 DEC. 2012."— Presentation transcript:

Similar presentations

About project

Feedback

SIP-Based-DECT Rev1.4 03　DEC. 2012.

Presentation on theme: "SIP-Based-DECT Rev1.4 03　DEC. 2012."— Presentation transcript: