Presentation is loading. Please wait.

Presentation is loading. Please wait.

EEE 334 LAB Fall 07 Lab Web Site: Admin TA: Mayda G. Bravo-Banuelos Lab TA: Alex Fink Himanshu Shah Open Lab TA: Vijay.

Similar presentations


Presentation on theme: "EEE 334 LAB Fall 07 Lab Web Site: Admin TA: Mayda G. Bravo-Banuelos Lab TA: Alex Fink Himanshu Shah Open Lab TA: Vijay."— Presentation transcript:

1 EEE 334 LAB Fall 07 Lab Web Site: Admin TA: Mayda G. Bravo-Banuelos Lab TA: Alex Fink Himanshu Shah Open Lab TA: Vijay Choudhary

2 EEE 334 LAB oAdmin TA and Grader: oMayda G. Bravo-Banuelos oOffice: oGWC 276 oOffice Hours: oMon 5:30 – 7:30 PM o oAdmin TA and Grader: oMayda G. Bravo-Banuelos oOffice: oGWC 276 oOffice Hours: oMon 5:30 – 7:30 PM o

3 EEE 334 LAB oPresentation Covers: oLab Area oLocation oDescription oGuidelines oLab Material oSchedule Overview oLab & TA hours oTA Schedule oLab Hours of operation oExperiments oGeneral oAvoid Common Mistakes oLab Report oWriting the Report oLate Reports oGrading oPresentation Covers: oLab Area oLocation oDescription oGuidelines oLab Material oSchedule Overview oLab & TA hours oTA Schedule oLab Hours of operation oExperiments oGeneral oAvoid Common Mistakes oLab Report oWriting the Report oLate Reports oGrading

4 EEE 334 LAB oLab Area oLocation: GWC 273 oDescription: oWork benches accommodate work stations oWork station equipment: oOscilloscopes:2 types, will need USB memory stick to save lab work oFunction Generators: 2 oMultimeters:2typ. oPower Supplies:2 oCurve Tracer: 1 oBreadboard oComputer oLab Area oLocation: GWC 273 oDescription: oWork benches accommodate work stations oWork station equipment: oOscilloscopes:2 types, will need USB memory stick to save lab work oFunction Generators: 2 oMultimeters:2typ. oPower Supplies:2 oCurve Tracer: 1 oBreadboard oComputer

5 EEE 334 LAB oLab Area oDescription oComponent Bin oRCL Meter: To avoid mistakes, measure all parts (Resistors, Capacitors, Inductors) oPlease return all components back to the bin when done with experiments oLab Area oDescription oComponent Bin oRCL Meter: To avoid mistakes, measure all parts (Resistors, Capacitors, Inductors) oPlease return all components back to the bin when done with experiments

6 EEE 334 LAB oLab Area Important Note: oThe Computers at GWC 273: oOnly have PSpice and Excel oNOT set up for internet oNOT set up for Acrobat Reader Print lab instructions before coming to the lab oGuidelines oFood or Drinks are NOT allowed at GWC 273 oSign in, do not have to sign out oOnly one group per work station oWhatever used during an experiment must be returned to its original place after use oLab Area Important Note: oThe Computers at GWC 273: oOnly have PSpice and Excel oNOT set up for internet oNOT set up for Acrobat Reader Print lab instructions before coming to the lab oGuidelines oFood or Drinks are NOT allowed at GWC 273 oSign in, do not have to sign out oOnly one group per work station oWhatever used during an experiment must be returned to its original place after use

7 oGuidelines oMaintain Work Stations Clean, Neat and organized Work Station after end of Summer Session: EEE 334 LAB

8 oGuidelines oMaintain Work Stations Clean, Neat and organized Work Station after end of Summer Session: EEE 334 LAB

9 oGuidelines oMaintain Work Stations Clean, Neat and organized Cleaning Work Station: EEE 334 LAB

10 oGuidelines oMaintain Work Stations Clean, Neat and organized Clean Work Benches: EEE 334 LAB

11 oLab Material oOverview

12 EEE 334 LAB oLab Material oOverview oImportant: 1.Students repeating EEE 334 must re-do all lab experiments (Department Policy) 2.Most experiments are time consuming oLabs 5 – 7 and 9 require the use of a Ground Strap due to the use of an electrostatic discharge (ESD) sensitive MOSFET chip Note: ESD can vaporize the chip’s very small inner conductors damaging it permanently Note: It is very important to wear the Ground Strap when handling this chip oLab 8 is a new lab for preparation for Digital Circuits curses

13 EEE 334 LAB oLab & TA hours oTA Schedule oLab Hours of operation oMon:12 – 10PM, Tu-Fri:8AM-10PM, Sat:8AM-12PM oLab & TA hours oTA Schedule oLab Hours of operation oMon:12 – 10PM, Tu-Fri:8AM-10PM, Sat:8AM-12PM

14 EEE 334 LAB oExperiments oGeneral oExperiments MUST be done in groups of 3 oForm groups today oSame members through class duration oMember can be from both EEE334 sections oSpecial Instructions for labs, if any, will be e- mailed prior to each lab. oi.e. for Lab 1: Do section 1.2 in PSpice too. oData sheets must be done individually although experiments are conducted in groups oGet the data sheet stamped by the TA ONLY after completing an experiment and before leaving the lab area oIf experiment is done in different lab visits, you must prove it in order to get the stamp Note: Copied data sheets WILL NOT BE STAMPED oExperiments oGeneral oExperiments MUST be done in groups of 3 oForm groups today oSame members through class duration oMember can be from both EEE334 sections oSpecial Instructions for labs, if any, will be e- mailed prior to each lab. oi.e. for Lab 1: Do section 1.2 in PSpice too. oData sheets must be done individually although experiments are conducted in groups oGet the data sheet stamped by the TA ONLY after completing an experiment and before leaving the lab area oIf experiment is done in different lab visits, you must prove it in order to get the stamp Note: Copied data sheets WILL NOT BE STAMPED

15 EEE 334 LAB oExperiments oAvoid Common Mistakes oCheck component values with RCL oDo not build messy circuits oConnect all circuit’s grounds to the source’s ground not to chassis ground oAlways set the Signal Generator to High Z oConnect Signal Generator to OUTPUT not SYNC oKnow difference between Freq. and Time domain oDo not Mix AC with DC quantities oKnow difference between Vp-p, Vp and Vrms oDo not MIX UNITS (pay attention to powers i.e. 10E-6, 10E6) oCollect enough data points where applicable oDocument sufficient lab data for report oExperiments oAvoid Common Mistakes oCheck component values with RCL oDo not build messy circuits oConnect all circuit’s grounds to the source’s ground not to chassis ground oAlways set the Signal Generator to High Z oConnect Signal Generator to OUTPUT not SYNC oKnow difference between Freq. and Time domain oDo not Mix AC with DC quantities oKnow difference between Vp-p, Vp and Vrms oDo not MIX UNITS (pay attention to powers i.e. 10E-6, 10E6) oCollect enough data points where applicable oDocument sufficient lab data for report

16 EEE 334 LAB oLab Report oWriting the report: Note: The ability to write quality technical reports is essential for an Engineering carrier oThis Lab requires one lab report per group oMembers take turns writing reports oThe Report consists of: oGrade Sheet oTitle Page oIntroduction oEquipment and Components used oProcedure oResults oDiscussion oConclusion oPost Lab Questions oLab Report oWriting the report: Note: The ability to write quality technical reports is essential for an Engineering carrier oThis Lab requires one lab report per group oMembers take turns writing reports oThe Report consists of: oGrade Sheet oTitle Page oIntroduction oEquipment and Components used oProcedure oResults oDiscussion oConclusion oPost Lab Questions

17 EEE 334 LAB oLab Report oWriting the report: oOnly typed reports allowed oNo hand written nor photocopied reports oAvoid wordiness and empty statements oKeep it clean-cut, neat and organized oUse computer programs to draw circuits, graphs and tables oDO NOT CONTROL COPY FIGURES FROM LAB MANUAL oDO NOT REFER ME TO THE DATA SHEET, PUT ALL OBSERVATIONS AND RESULTS IN REPORT oKeep number of sheets per report to a minimum  10 pages max + DataSheets oLab Report oWriting the report: oOnly typed reports allowed oNo hand written nor photocopied reports oAvoid wordiness and empty statements oKeep it clean-cut, neat and organized oUse computer programs to draw circuits, graphs and tables oDO NOT CONTROL COPY FIGURES FROM LAB MANUAL oDO NOT REFER ME TO THE DATA SHEET, PUT ALL OBSERVATIONS AND RESULTS IN REPORT oKeep number of sheets per report to a minimum  10 pages max + DataSheets

18 EEE 334 LAB oLab Report oTurn in Lab Reports: oDrop only ON TIME reports into the white wooden box in the GWC 273 lab area on the due date by 10PM oLate Reports: oTurn in late reports directly to me OR get them signed and dated by a TA and slide under my door oDO NOT DROP LATE REPORTS INTO WHITE BOX, YOU WILL LOOSE 50% OF GRADE oLate lab report penalty is -10% per day not including University Holidays oReports that are turned in after graded reports are returned need to have the Professor’s signature oLab Report oTurn in Lab Reports: oDrop only ON TIME reports into the white wooden box in the GWC 273 lab area on the due date by 10PM oLate Reports: oTurn in late reports directly to me OR get them signed and dated by a TA and slide under my door oDO NOT DROP LATE REPORTS INTO WHITE BOX, YOU WILL LOOSE 50% OF GRADE oLate lab report penalty is -10% per day not including University Holidays oReports that are turned in after graded reports are returned need to have the Professor’s signature

19 EEE 334 LAB oLab Report oGrading oPoint Distribution Sheet: There is a -5 points penalty for missing Grade Sheet oLab Report oGrading oPoint Distribution Sheet: There is a -5 points penalty for missing Grade Sheet

20 Questions?

21 Have a great semester! Thank You


Download ppt "EEE 334 LAB Fall 07 Lab Web Site: Admin TA: Mayda G. Bravo-Banuelos Lab TA: Alex Fink Himanshu Shah Open Lab TA: Vijay."

Similar presentations


Ads by Google