Presentation on theme: "Mastey Teinture Zero Ammonia - High Lift - Permanent Hair Color"— Presentation transcript:
1 Mastey Teinture Zero Ammonia - High Lift - Permanent Hair Color
2 Mastey Teinture Zero Ammonia Permanent High-Lift Color No Ammonia DamageNo Ammonia IrritationNo Ammonia FumesProduces natural looking color and shineConditioning formula with Natural Moisturizing Factors (NMF)
3 Mastey Teinture Zero Ammonia Permanent High-Lift Color 60 shadesCan lift upto 5 levelsCovers grey with uniform resultsStays moist for easy application40 – 45 minute processing timeTurns into a no-drip cream when mixed with developerUnlimited mixing possibilities
4 Mastey Teinture Zero Ammonia Permanent High-Lift Color Contains anti-oxidant grape seed extract for longer-lasting colorFormulated with 3 lifting bases to maintain a lasting natural tone.Pantothenic Acid (B5) helps mend hair and keeps it healthy with its anti-irritant properties, it both soothes and provides true protection.Hair is protected and moisturized by emphasizing shine and promoting longer-lasting color.
5 TriBase System of 3 lifting bases Colors will not lift outside their spectrum
6 The Mastey Teinture Secret Formula Utilizes HEMEA as the alkaline agentFormulation is proprietary blend of ingredients (trade secret)Dyes are cosmetic gradeExtra purityEarth friendlyControlled Oxidation System
7 Teinture Availability Bottle : 120 ml (4 fl oz)Mixture : 1 to 1 (1 part color & 1 part Mastey Le Developer crème peroxide)Use with Mastey Le Developer – 10, 20, 30, 40, 50, and 60 volumes.Processing time 45 minutes.Once mixed with Le Developer, formulation is a smooth creamy texture that facilitates easy application.
8 Lightening power up to 5 levels LIFT COLOR WITH COLORLightening power up to 5 levelsFrom Level 6 and up using 50 or 60 Volume Mastey Le Developer.
10 Pre-oxidized die molecules Color InstantanePigment PackerPre-oxidized die moleculesExtra small molecules that surrounds hair color diesWill not darken colorEffects tone not shadeDoubles Die Load
11 Color InstantaneBottle : 300 ml (10.2 fl oz)Mixture : Use alone or mix with your Mastey Teinture Zero Ammonia formulation (see formulations)Texture facilitates easy application in formulations or directly on hair
12 6 different concentrations MASTEY LE DEVELOPER6 different concentrations
13 This is used to minimize the lightening rate of Teinture colors. 10 VolumeThis is used to minimize the lightening rate of Teinture colors.It is used to:· Darken· Add tone-on-tone color· Lighten up to one tone
14 · Used whenever coloring grey hair. 20 Volume· Used whenever coloring grey hair.· Lightens natural hair up to 2 levels.
15 30 VolumeUsed to increase the lightening ability of colors up to 3 levels.Can also be used for first-time applications on lengths and ends, then after 20 minutes use Mastey Le Developer 20 volume on the scalp area.On levels 2 – 3 – 4, it is used to lighten up to 2 levels. The darker levels are more difficult to lighten.For Darker levels please use 40 volume
16 Lift darker levels up to 3 levels. 40 VolumeLift darker levels up to 3 levels.Can also be used on level 6 and all Red shades to bring out red tone in the natural pigment.
17 Use on levels 6 –9 to create desired lift. 50 VolumeUse on levels 6 –9 to create desired lift.Used to increase lightening ability of color up to 4 levels
18 Used to increase the lightening ability up to 5 levels 60 VolumeUse with level 10 and up to create highlights without use of bleach on levels 6 and upUsed to increase the lightening ability up to 5 levels
19 ZERO AMMONIA ADVANTAGE The unique Mastey Teinture base and the absence of ammonia in Teinture Zero-Ammonia Hair color allows for the use of higher volumes of peroxide without any discomfort to the scalp.
20 Complimentary Products Use Me FirstTraite Sulfate-Free ShampooSuperPac Deep ReconstructorMoisturee Deep moisturizerFrehair detangler and daily conditionerHC Formula + B5
21 Hair Purifier similar to a facial exfoliater Use Me FirstHair Purifier similar to a facial exfoliaterExfoliates away all build up (product, polymer, environmental) to allow conditioners and chemical services to penetrate fully into the hairIs not a solventContains no alcohol
22 Will not damage the cuticle layer Eliminates chlorine green Use Me FirstWorks in one minuteWill not damage the cuticle layerEliminates chlorine greenSafe enough to use daily
23 Use Me FirstAvailability8oz32 oz1 Gallon55 Gallon Drum
24 Traite Sulfate-Free Shampoo Gentle Sulfate-Free crème cleanser for hair and skinCleanses by addition of vital nutrientsRestores the hair and skin’s NMFUses the mildest European skin cleansersRecommended as a facial cleanserHair Color Safe & Color Protecting
25 SuperPac Deep Reconstructor Rebuilds strength and elasticity to severely damaged hairPenetrates the inner structure because of small molecular weight and sizeWill not strip color or harm curlsContains no surfactants,no sodium/ammonium lauryl sulfates, no artificial colors or synthetic polymersShould be used with all chemical services
26 Moisturee Deep Moisturizer Concentrated NMF penetrates deep into hair structure to restore the proper NMF levels to hair and skin.Increases hair elasticityReturns the shine, manageability and feel to hair hair lost through shampooing, thermal styling, chemical services and the environment.Leaves no build-up or residueDoes not contain glycerin
27 FrehairNMF to replenish hair’s proper moisture balanceLeaves hair tangle-free without weighing it downEliminates static electricity by interaction with the negative charges in the hair that cause staticGives hair incredible comb-ability with natural shine and healthContains NO oils, waxes, dyes, balsam or propylene glycol
28 Helps prevent split ends Protects from styling heat HC Formula + B5Mends cuticleHelps prevent split endsProtects from styling heatNeutralizes ammonia residue
29 Soothes skin from burns and skin irritations HC FormulaSoothes skin from burns and skin irritationsProtects the scalp prior to servicesEnhances the healthy growth of new hair deep within the surface of scalpContains:pro-vitamin B5vitamins A and Elipids, mineralsour pure vegetable protein compound that duplicates keratin protein
37 The number before the (.) dot determines the level Teinture NumberingThe number before the (.) dot determines the level1.Black3.Dark Brown4.Brown5.Light Brown6.Dark Blonde7.Blonde8.Light Blonde9.Very Light Blonde10.Lightest Blonde
38 Teinture NumberingThe first number after the dot (.) determines the primary tone.0NATURALneutral.1ASHblue base.2PLATINUMred/violet base.3GOLDENyellow base.4COPPERorange base.5MAHAGONYred, yellow, blue base.6REDred base.7BLUE
39 Teinture NumberingThe Second number after the dot (.) determines the secondary toneLEVELPRIMARY TONESECONDARY TONE4. (brown)5 (mahagony)6 (red)9.38.7. (blonde)4 (copper)
41 Some highlights are more visible at certain levels. reds and oranges are visible at levels 4, 5, 6 and 7, but invisible on darker shades.
42 Absorb the light and appear darker than their level. HighlightsCool highlights:BlueVioletAbsorb the light and appear darker than their level.
43 Reflect the light and therefore appear lighter than their level. HighlightsWarm HighlightsCopperGoldenReflect the light and therefore appear lighter than their level.
44 Grey Hair easily absorbs Blue and Red highlights. This is why you must always use basic colors to naturally cover grey hair.Use warm tones to cover difficult grey hair.
45 Using lower volume Le Developer = Less intense highlights since there is less lightening of the natural pigments.Using higher volume Le Developer = More radiant highlightssince there is increased lightening of the natural pigments.
59 Color ChangesWhen hair is fragile, overly damaged, or very pale a highlight can change colors.Desired ColorColor ChangeWhat to AddGoldenBeigeYellowAshBlueOrangePlatinumViolet PinkCopperPinkRedPurpleish Pink
61 Can be applied to grey hair Can be taken through the lengths. High-Lift Blonde 11.2Used on levels 6 and up.Can be applied to grey hairCan be taken through the lengths.If lengths are faded and need to be retouched, use Color Instantané
62 High-Lift Blonde 11.211.2 creates maximum lightening levels with the use of higher volumes of peroxide (50 or 60) with no irritation to scalp.11.2 is Neutral to PlatinumCan be mixed with any other shade when higher lift is required or needed.
63 Can be used with Reds or Ash High-Lift Blonde 11.2Can be used with Reds or AshUse 11.2 instead of bleach in hair color for better lift controlUse 11.2 with Amplifiers to create infinite shade possibilities.
64 Grey HairThis is a mixture of hair with and without pigmentThe hair colorist must see if the hair is more or less 50% grey or if there are very grey areas in order to make a diagnosis.Use Le Developer 20 volume peroxide for darker shadesUse Le Developer 30 volume on red and lighter shades.
65 Level SelectionHow to select the level of tint to use to achieve the approximate desired colorDetermine client’s hair levelChoose desired level and multiply it by 2Subtract client’s hair level to find level of tint to use
66 9 is the level to use. Level Selection Example: Formula: Desired Level = 6Clients Level = 3Formula:Desired Level X 2 = (n) – Clients Level = Teinture Level6 X 2 = 12 – 3 = 99 is the level to use.
67 Peroxide Choice Tone on Tone Lighten Darken Less than 50% grey hair Tone on ToneLightenDarkenLess than 50% grey hairDesired Shade+Le Developer 10 VolumeLe Developer 20 or 30 VolumeMore than 50% grey hairLe Developer 20 VolumeLe Developer 20 volume for dark shades or 30 Volume for lighter shades
68 Pour one part of Teinture into a non-metal container. MixingPour one part of Teinture into a non-metal container.Add 1 part of Le Developer oxidant cream peroxide.Mix carefully.
69 Technical Applications Apply the mixture with a brush (or an applicator bottle) on towel dried hair as you usually do.Development time is between 45 minutes after scalp area application.Where there is a high proportion of grey hair, the waiting time can be extended by 10 minutes without any adverse affects.After development time is completed, rinse.Follow with complete Mastey after service process
70 Technical Applications First application on virgin hairSeparate the hair into 4 sectionsBegin with lengths and ends (1/2 inch from scalp area).Leave on for 15 minutes then apply to scalp area.Leave on for 30 minutes.Rinse thoroughlyFinish with Mastey after service regimen
71 Technical Applications Touch-up techniques:Separate hair into 4 sectionsApply color to new growth. When working on grey hair, begin with whitest areas. Development time: 45 minutes minimum
72 Technical Applications If there has been a loss of color ,To Restore Color during touch up applicationAdd Color Instantané appropriate shade to the remaining of your formula 15 minutes before rinsing your touch up1 ounce of original color formula + 1 ounce Instantané
73 Technical Applications If there is no orginal color formulation left:Simply apply Color Instantane directly to the hair.Massage throughout hair and scalpLeave in 15 minutes
74 Technical Applications Always rinse thoroughlyFollow with Mastey After service regimen
75 Technical Applications If hair is very porous or very fragileAfter the development time, rinse carefully.Finish with full treatment regimen of Traite Shampoo, Moisturee Deep Moisturizer, and SuperPac Deep Reconstructor.Leave in reconstructor and moisturizer for at least 5 minutesRinse well.Recommend appropriate at home treatment regimen
76 Technical Applications Application on bleached hairUse the lighter Teinture shades: tone level 9 or 10 diluted in the following ways:To achieve warm or ash tones :1 part of the Teinture desired shade+ ½ part Instantane (appropriate shade)+ ½ parts of Le Developer 20 volume.Development time : minutes.
77 Technical Applications Pre Coloring or FillingPre-coloring or filling is the technique used to replace pigments of the desired tone that are missing in the hair.This technique is used before color application:Determine the desired toneOver lengths and ends, apply one dose of Color InstantanéDo not rinse.Then apply the desired Teinture color formulation directly onto pre-colored or filled hair.
78 Highlights with Teinture Apply to a minimum base level of 6.Pour one part of desired Teinture shade into a non-metal container.Add 1 part of Le Developer oxidant cream peroxide, 50 or 60 volumeMix carefullyWith a brush, apply on the scalp areaDo not pull color through the rest of the hair.Development time is 45 minutes after application is completeAfter development time is completed, rinse thoroughlyFollow with Mastey After Service Regimen
79 Color InstantanéAs Color Instantané is a tone-on-tone color, it does not darken or lighten the base.
80 Color InstantanéIf you streak hair or slightly lighten it before applying Color Instantané, you must stop the lightening process at the best lightening base to reveal the desired highlights:Red orangemahogany-brownOrangecopper-copper brownYellowgoldenLight yellowbeige–platinum
81 Color Instantané Technical Application ToRefresh faded color between touch ups.Apply Color Instantané appropriate shade directly to clean hairLeave in at least 15 minutesRinseFinish with Mastey After Service Treatment
82 Color Instantané Technical Application To Restore Color during touch up applicationApply Color Color Instantané appropriate shade to your formula 15 minutes before rinsing your touch upMassage throughout hair and scalpLeave in 15 minutesRinse.Finish with Mastey After Service Regimen
83 Color Instantané Technical Application Correct the shade during or after coloring or toning application.Apply Color Instantané appropriate shade throughout the entire hairLeave in at least 5 minutesRinseFinish with Mastey After Service Regimen
84 Color Instantané Technical Application To Tone pre-bleached highlights.Apply Color Color Instantané directly to clean pre-lightened hairLeave in at least minutesRinseFinish with Mastey After Service Regimen
85 Poor coverage of grey hair: TroubleshootingPoor coverage of grey hair:The mixture does not contain enough of, or is completely lacking in, a Natural shade.The chosen shade is too light and makes the new growth look lighter than the lengths.The application method was not respected.Development time was too short, minimum 45 minutesNot enough product was used.
86 Highlights will not take: TroubleshootingHighlights will not take:The successive color pull-through on already-colored hair left the hair overly porous.To solve this problem, use Color Instantané and SuperPac.Mastey After-color treatments processes were not used.Mastey at Home treatments were not used.Hair needs pre-coloring or filling due to the overly porous lengths.
87 Color is too light: Troubleshooting The natural tone level was not determined correctly.The chosen shade is too light.The peroxide volume is too strong.The % color / peroxide was not correct. There was too much peroxide.The mixture calls for 1 dose of Teinture for 1 of Le Developer peroxide.
88 Color is too dark: Troubleshooting The chosen shade is too dark. The peroxide volume is too weak.The mixture was not correct; there was not enough peroxide.
89 New growth is too yellow when using 11. tones: TroubleshootingNew growth is too yellow when using 11. tones:The shade chosen does not have enough of the proper tone to neutralize the yellow.The natural color is too dark for lightening in one step.Lengths and ends are ashy and make the new growth look too yellow.The development time was not long enough (45 minutes minimum).The product was pulled through, creating over-oxidized lengths.
90 New growth turns ashy when using 11. tones: TroubleshootingNew growth turns ashy when using 11. tones:The chosen shade contains tones which are too strong for the tone level.There is too much grey hair.The fine hairs around the hairline were not protected by a shorter development time.
91 Ends turn ashy when using the 11. tones: TroubleshootingEnds turn ashy when using the 11. tones:Super-lighteners are mixed with very high-volume peroxide and should only be used on new growth.When they are applied to already lightened and thus porous lengths, the highlight turns ashy, since it no longer controls the lightening of natural hair.To refresh ends, use Color Instantané.
92 Highlights are too intense on the new growth: TroubleshootingHighlights are too intense on the new growth:The Natural shade should have been used in the mixture.Pay close attention to fine hair around the hairline, which calls for a shorter development time.The chosen shade is too light or too dark.The peroxide used is too strong.
93 Ends turn ashy: Troubleshooting Color was pulled through too rapidly. The mixture was too cold and turned ashy.Lengths are too oxidized and the nuance turned into a cool shade.
94 Poor coverage of grey hair: TroubleshootingPoor coverage of grey hair:The mixture does not contain enough of, or is completely lacking in, a Natural shade.The chosen shade is too light and makes the new growth look lighter than the lengths.The application method was not respected.Development time was too short, minimum 45 minutesNot enough product was used.