Presentation is loading. Please wait.

Presentation is loading. Please wait.

In Sonata TM, start with the layout of the system. Import a drawing in just about any format and start putting components on it.

Similar presentations


Presentation on theme: "In Sonata TM, start with the layout of the system. Import a drawing in just about any format and start putting components on it."— Presentation transcript:

1 In Sonata TM, start with the layout of the system. Import a drawing in just about any format and start putting components on it.

2 Start with a plan view drawing (Use any one of 26 graphic formats)

3 Then start adding inputs, outputs, switches, controls, output zones, etc.

4 Once they’re all there, connect them up to the mixer...

5 In just a few minutes, with a little thought made easier by the graphic layout, you’ll have the whole system physically laid out and ready for the next step.

6

7 Sonata TM uses Modes, Associations, and Routing to define the logic of a system.

8 Modes: Focus is on an individual input or output, and determines how many different modes that input or output can be in. Switch settings describe that mode.

9 Modes Tab

10 Associations: Attach each mode to every input or output that can be in that mode. Can also assign priorities to modes.

11 Associations Tab

12 Routing: A routing table is created for each mode. Full cross-point delay and level is available for each table.

13 Routing Tab

14 All that’s left is to set the event triggers (switches, controls, etc.) And then you’ve completed the initial design of the system.

15 All of the controls, switches, gizmos, etc., are there for you to use. Here are a few...

16 Various level controls (And more coming)

17 PEQ

18

19

20 Comp-limiter

21 Shelving...

22 And cut filters

23 Signal generators and much more

24 This is just a brief overview. But the point is that designing a system is intuitive & much faster. AND, there are some additional very important advantages….

25 You can run offline

26 Open a Door...

27 And another...

28 Turn on another zone...

29 ...and debug on the fly

30 The run screen offers a great sales tool to use with customers

31 Show them how their system will actually work, fine tune it with them.

32 It’s the whole package! Auto & Manual Mixing Auto & Manual Mixing ALC & NOM ALC & NOM Routing Routing Room Combining Room Combining Door Sensors Door Sensors Programmable Logic Programmable Logic Remote Controls Remote Controls Output Logic Output Logic Relay Control Port Relay Control Port Programmable Relay Programmable Relay Signal Processing Signal Processing Level Level Signal Generator Signal Generator Comp/Limit Comp/Limit High Shelf/Cut High Shelf/Cut Lo Shelf/Cut Lo Shelf/Cut PEQ PEQ

33 Thank you for taking the time to explore the new Sonata TM Software. If you have any questions, please feel free to contact us at or (801)


Download ppt "In Sonata TM, start with the layout of the system. Import a drawing in just about any format and start putting components on it."

Similar presentations


Ads by Google