Presentation is loading. Please wait.

Presentation is loading. Please wait.

Multi-Sync Repair Training DPM Diversified Products Mfg Inc. Click the Mouse or use the Down Arrow to advance to the next point.

Similar presentations


Presentation on theme: "Multi-Sync Repair Training DPM Diversified Products Mfg Inc. Click the Mouse or use the Down Arrow to advance to the next point."— Presentation transcript:

1 Multi-Sync Repair Training DPM Diversified Products Mfg Inc. Click the Mouse or use the Down Arrow to advance to the next point.

2 DPM Multi- Sync Training  Part 1: Support Chemicals  Part 2: Prepare the Sump  Part 3: Weld Multi-Sync in Place  Part 4: Fill the Multi-Sync Boot Multi-Sync Repair DPM

3 Multi-Sync Repair DPM Weld Multi-Sync Parts Adjust clamp for Bonding Ring

4 Multi-Sync Repair DPM Weld Multi-Sync Parts Adjust clamp for Bonding Ring Weld Bonding Ring with Zip-Tite

5 Multi-Sync Repair DPM Weld Multi-Sync Parts Adjust clamp for Bonding Ring Weld Bonding Ring with Zip-Tite Bonding Ring grooves face sump wall Bonding Ring is between stud plate or threaded nut and sump wall Tighten clamp on Bonding Ring

6 Multi-Sync Repair DPM Weld Multi-Sync Parts Adjust clamp for Bonding Ring Weld Bonding Ring with Zip-Tite Bonding Ring grooves face sump wall Bonding Ring is between stud plate or threaded nut and sump wall Tighten clamp on Bonding Ring Slide bolt plate or nut into position

7 Multi-Sync Repair DPM Weld Multi-Sync Parts Adjust clamp for Bonding Ring Weld Bonding Ring with Zip-Tite Bonding Ring grooves face sump wall Bonding Ring is between stud plate or threaded nut and sump wall Tighten clamp on Bonding Ring Slide bolt plate or nut into position Slide clamp for existing boot in position

8 Multi-Sync Repair DPM Weld Multi-Sync Parts Weld Sleeve with Zip-Tite Fill port points AWAY from sump wall

9 Multi-Sync Repair DPM Weld Multi-Sync Parts Weld Sleeve with Zip-Tite Fill port points AWAY from sump wall Fit clamp on Sleeve for welding

10 Multi-Sync Repair DPM Weld Multi-Sync Parts Weld Sleeve with Zip-Tite Fill port points AWAY from sump wall Fit clamp on Sleeve for welding Solvent weld with Zip-Tite® Tighten clamps

11 Multi-Sync Repair DPM Weld Multi-Sync Parts Weld Sleeve with Zip-Tite Fill port points AWAY from sump wall Fit clamp on Sleeve for welding Solvent weld with Zip-Tite® Tighten clamps Apply Zip-Tite® to mated seam

12 Multi-Sync Repair DPM Weld Multi-Sync Parts Weld Sleeve with Zip-Tite Fill port points AWAY from sump wall Fit clamp on Sleeve for welding Solvent weld with Zip-Tite® Tighten clamps Apply Zip-Tite® to mated seam Weld Eccentric Reducer with Zip-Tite® and clamp

13 Multi-Sync Repair DPM Weld Multi-Sync Parts Weld Sleeve with Zip-Tite Fill port points AWAY from sump wall Fit clamp on Sleeve for welding Solvent weld with Zip-Tite® Tighten clamps Apply Zip-Tite® to mated seam Weld Eccentric Insert with Zip- Tite® and clamp Weld the Reducer with Zip-Tite® and clamp

14 Multi-Sync Repair DPM Assemble Multi-Sync Mount Bonding Ring to sump wall Apply DBB V to grooved side of Bonding Ring and smooth out

15 Multi-Sync Repair DPM Assemble Multi-Sync Mount Bonding Ring to sump wall Apply DBB V to grooved side of Bonding Ring and smooth out. Tighten threaded nut or stud plate to secure Bonding Ring to sump wall.

16 Multi-Sync Repair DPM Assemble Multi-Sync Mount Bonding Ring to sump wall Apply DBB V to grooved side of Bonding Ring and smooth out. Tighten threaded nut or stud plate to secure Bonding Ring to sump wall. Clean excess DBB V from Bonding Ring with DBC saturated rag.

17 Multi-Sync Repair DPM Assemble Multi-Sync Weld the Sleeve to Bonding Ring Apply Zip-Tite® to edge of Bonding Ring.

18 Multi-Sync Repair DPM Assemble Multi-Sync Weld the Sleeve to Bonding Ring Apply Zip-Tite® to edge of Bonding Ring. Apply Zip-Tite® to inside of Sleeve.

19 Multi-Sync Repair DPM Assemble Multi-Sync Weld the Sleeve to Bonding Ring Apply Zip-Tite® to edge of Bonding Ring. Apply Zip-Tite® to inside of Sleeve. Snap Sleeve on Bonding Ring with fill port at top and clamp at wall.

20 Multi-Sync Repair DPM Assemble Multi-Sync Dry fit Eccentric Insert and Multi- Sync Reducer into Sleeve

21 Multi-Sync Repair DPM Assemble Multi-Sync Dry fit Eccentric Insert and Multi- Sync Reducer into Sleeve Mark position of the parts.

22 Multi-Sync Repair DPM Assemble Multi-Sync Dry fit Eccentric Insert and Multi- Sync Reducer into Sleeve Mark position of the parts. Apply Zip-Tite® to inside of Sleeve and outside of Eccentric Insert.

23 Multi-Sync Repair DPM Assemble Multi-Sync Dry fit Eccentric Insert and Multi- Sync Reducer into Sleeve Mark position of the parts. Apply Zip-Tite® to inside of Sleeve and outside edge of Eccentric Insert.

24 Multi-Sync Repair DPM Assemble Multi-Sync Dry fit Eccentric Insert and Multi- Sync Reducer into Sleeve Mark position of the parts. Apply Zip-Tite® to inside of Sleeve and outside edge of Eccentric Insert. Position insert with mark on Sleeve.

25 Multi-Sync Repair DPM Assemble Multi-Sync Apply Zip-Tite® inside of Eccentric Insert and to outside edge of Multi-Sync Reducer

26 Multi-Sync Repair DPM Assemble Multi-Sync Apply Zip-Tite® inside of Eccentric Insert and to outside edge of Multi-Sync Reducer. Position Reduce with mark on Eccentric Insert.

27 Multi-Sync Repair DPM Assemble Multi-Sync Apply Zip-Tite® inside of Eccentric Insert and to outside edge of Multi-Sync Reducer. Position Reduce with mark on Eccentric Insert. Insure proper insertion with no gaps at bottom and clamp to pipe.

28 Multi-Sync Repair DPM Assemble Multi-Sync Apply Zip-Tite® inside of Eccentric Insert and to outside edge of Multi-Sync Reducer. Position Reduce with mark on Eccentric Insert. Insure proper insertion with no gaps at bottom and clamp to pipe. Apply Zip-Tite® around the joints and let cure 30 minutes.

29 Multi-Sync Repair DPM Assemble Multi-Sync Apply Zip-Tite® inside of Eccentric Insert and to outside edge of Multi-Sync Reducer. Position Reduce with mark on Eccentric Insert. Insure proper insertion with no gaps at bottom and clamp to pipe. Apply Zip-Tite® around the joints.

30 Multi-Sync Repair DPM Watch the following: Weld Multi-Sync Parts video in Part 3A Assembling the MS Parts video in Part 3B

31 Contact Diversified Products Mfg 5523 Baggett Marysville Road Oroville, CA (530) Multi-Sync Repair DPM

32 See our website for more information Multi-Sync Repair DPM


Download ppt "Multi-Sync Repair Training DPM Diversified Products Mfg Inc. Click the Mouse or use the Down Arrow to advance to the next point."

Similar presentations


Ads by Google