Presentation is loading. Please wait.

Presentation is loading. Please wait.

Light Pre-Pass -Deferred Lighting: Latest Development- by Wolfgang Engel August 3rd, 2009.

Similar presentations

Presentation on theme: "Light Pre-Pass -Deferred Lighting: Latest Development- by Wolfgang Engel August 3rd, 2009."— Presentation transcript:

1 Light Pre-Pass -Deferred Lighting: Latest Development- by Wolfgang Engel August 3rd, 2009

2 Screenshot


4 Agenda Rendering Many Lights History Light Pre-Pass (LPP) LPP Implementation Efficient Light rendering on DX8, 9, 10, 11 and PS3 hardware Balance Quality / Performance MSAA Implementation on DX 10.0, 10.1, XBOX 360, 11 and PS3 hardware

5 Rendering Many Lights History Forward / Z Pre-Pass rendering – Re-render geometry for each light -> lots of geometry throughput (still an option on older hardware) – Write pixel shader with four or eight lights -> draw lights per-object -> need to split up geometry following light distribution – Store light properties in textures and index into this texture -> dependent texture look-up and lights are not fully dynamic

6 Rendering Many Lights History Deferred Shading / Rendering Split up rendering into a geometry pass and a lighting pass -> makes lights independent from geometry Geometry pass stores all material and light properties Killzone 2’s G-Buffer Layout (courtesy of Michal Valient)

7 Rendering Many Lights History Deferred Shading / Rendering Depth Buffer Deferred Lighting Forward Rendering Switch off depth write Specular / Motion Vec Normals Albedo / Shadow Sort Back-To-Front Render opaque objectsTransparent objects

8 Rendering Many Lights History Advantages: – Only one geometry pass for the main view (probably more than a dozen for other views like shadows, reflections, transparent objects etc.) – Lights are blit and therefore only limited by memory bandwidth Disadvantages: – Memory bandwidth (reading four render targets for each light) – Recalculate full lighting equation for every light – Limited material representation in G-Buffer – MSAA difficult compared to Forward Renderer

9 Light Pre-Pass Light Pre-Pass / Deferred Lighting

10 Light Pre-Pass Version A: – Geometry pass: fill up normal and depth buffer – Lighting pass: store light properties in light buffer – 2. Geometry pass: fetch light buffer and apply different material terms per surface by re- constructing the lighting equation

11 Light Pre-Pass Version B (similar to S.T.A.L.K.E.R: Clear Skies [Lobanchikov]): – Geometry pass: fill up normal + spec. power and depth buffer and a color buffer for the ambient pass – Lighting pass: store light properties in light buffer – Ambient + Resolve (MSAA) pass: fetch light buffer use its content as diffuse and specular content and add the ambient term while resolving into the main buffer

12 Light Pre-Pass S.T.A.L.K.E.R: Clear Skies

13 Light Pre-Pass Light Properties that are stored in light buffer Light buffer layout D red/green/blue is the light color

14 Light Pre-Pass Specular stored as luminance Reconstructed with diffuse chromacity

15 Light Pre-Pass CryEngine 3: On the right the approx. specular term of the light buffer and on the left a correct specular term with its own specular color (courtesy of Martin Mittring)

16 Light Pre-Pass CryEngine 3: On the right the approx. specular term of the light buffer and on the left the final image (courtesy of Martin Mittring)

17 Light Pre-Pass Advantage of Version A: offers more material variety Version B faster: does not need to render scene geometry a second time

18 Light Pre-Pass Implementation Memory Bandwidth Optimizations (DirectX 9) – Depth-fail Stencil lights: render light volume in stencil and then blit light [Hargreaves][Valient] – Geometry lights: render bounding geometry -> never get inside light -> avoid depth func change [Thibieroz04] – Scissor lights: construct scissor rectangle from bounding volume and set it [Placeres] (PS3: depth bound testing ~ scissor in 3D) – Batched lights: sort lights by size, x and y position in screenspace. Render close lights in batches of 4, 8, 16 Distance from Camera

19 Light Pre-Pass Implementation Memory Bandwidth Optimizations (DirectX 10, 10.1, 11) – GS bounding box: construct bounding box in geometry shader – Implement lighting with the compute shader Memory Bandwidth Optimizations (DirectX 8) – Same as DirectX 9 if supported – Re-render geometry per light as alternative

20 Light Pre-Pass Implementation Memory Bandwidth Optimizations (PS3) 1.Full GPU solution [Lee]: like DirectX9 with depth buffer access and depth bounds testing + batched light support 2.SPE (Synergistic Processing Element) + GPU solution [Palestra] : divide light buffer in tiles: a)Cull tile frustum against light frustum on SPE and keep track of which light goes into which tile b)Render lights in batches per tile on GPU into light buffer 3.Full SPE solution [Swoboda][Tovey]: like 2 a) but render lights in batches on the SPE into the light buffer

21 Light Pre-Pass Implementation Resistance 2 TM in-game screenshot; first row on the left is the depth buffer, on the right is the normal buffer; in the second row is the diffuse light buffer and on the right is the specular light buffer; in the last row is the final result.

22 Light Pre-Pass Implementation Uncharted TM in-game screenshot

23 Light Pre-Pass Implementation Blur TM in-game screenshot

24 Light Pre-Pass Implementation Balance Quality / Performance – Stop rendering dynamic lights after a certain range for example 40 meters and render glow cards instead – Use smaller light buffer for distant lights and scale up

25 Light Zoning Advanced interzone lighting analysis [Lengyel] Problem: e.g. light shines on other side of wall on the floor -> have special light types that deal with the problem like a 180 degree spotlight; artists have to place this

26 MSAA Multisample Anti-Aliasing (courtesy of Nicolas Thibieroz)

27 MSAA LPP Version A 1.Geometry pass: render into MSAA’ed normal and depth buffer 2.Lighting pass (ideal world): render by reading each sample in the MSAA’ed buffer and write into each sample in the MSAA’ed light buffer 3.Second Geometry pass: render geometry into MSAA’ed accumulation buffer by reading the MSAA’ed light buffer, depth and normal buffer and re-constructing the lighting equation 4.Resolve: into main buffer

28 MSAA LPP Version B 1.Geometry pass: render into MSAA’ed normal, depth and color buffer 2.Lighting pass (ideal world): render by reading each sample in the MSAA’ed buffer and write into a sample in the MSAA’ed light buffer 3.Ambient pass: resolve light buffer and color buffer into main buffer by adding the ambient term

29 MSAA Lighting pass: MSAA lighting is required e.g. one sample is covered by a green light and three by a red light Per sample is expensive-> optimize by detecting polygon edges – Run screen-space edge detection filter with normal and/or depth buffer – Or use centroid sampling

30 MSAA Store result in stencil buffer Two shaders: – run the per-sample shader only on edges – rest -> run per-pixel shader // if MSAA is used for (int p = 0; p < 2; p++) { … renderer->setDepthState(stencilTest, (p == 0)? 0x1 : 0x0); renderer->setShader(lighting[p]); … }

31 MSAA Centroid Sampling Trick: Edge detection with centroid sampling (courtesy of Nicolas Thibieroz)

32 MSAA Centroid Sampling Trick II – Sample without and with centroid sampling -> find out if the second sample coordinate is offset [Thieberoz] – Check the fractional part of the position value if it equals 0.5 -> no polygon edge [Persson]

33 MSAA Centroid sampling Trick III: Disclaimer: – Probably only works with 2xMSAA – PC Hardware might return the center point for 4xMSAA [Shishkovtsov]

34 MSAA … // shader that fills the G-Buffer struct PsIn { centroid float4 position : SV_Position; … }; // find polygon edge with centroid sampling Out.base.a = dot(abs(frac(In.position.xy) - 0.5), ); // shader that resolves the color buffer with the edge data in alpha // resolve color buffer and write out 1 into a non-MSAA’ed render target return (base.a > 0.0); // shader that creates the stencil buffer mask clip(BackBuffer.Sample(filter, In.texCoord).a - 0.5); …

35 MSAA DirectX 10.1, 11, XBOX 360: execute pixel shader per sample struct PsIn { … uint uSample : SV_SAMPLEINDEX; // Sample frequency }; float4 PSLightPass_EdgeSampleOnly(PsIn In) : SV_TARGET { // Sample GBuffers C = Color.Load( nScreenCoordinates, In.uSample); Norm = Normal.Load( nScreenCoordinates, In.uSample); D = Depth.Load( nScreenCoordinates, In.uSample); // extract data from GBuffers //… // do the lighting return LightEquation(…); }

36 MSAA DirectX 9: – Can’t run shader at sample frequency or support of mask – no MSAA’ed depth buffer read and write DirectX 10 – Can write with a mask into samples and read from samples -> shader runs per-pixel – No MSAA’ed depth buffer read and write officially (maybe if you ask your hardware support engineer )

37 MSAA PS3 1.Full GPU solution: – Use write mask to write into each sample per-pixel – Use edge detection to fill up stencil buffer and run per-sample only on the edges (stencil buffer is after pixel shader -> not very effective) 2.SPE + GPU solution: same as 1. 3.Full SPE solution [Swoboda]: use SPE to render per-sample

38 Future The story of the Light Pre-Pass / Deferred Lighting is still not fully written and there are many things waiting to be discovered in the future …

39 Future Compute Shader Implementation Johan Andersson, DICE -> check out the Beyond Programmable Shading course

40 Acknowledgements Nathaniel Hoffmann Nicolas Thibieroz Matt Swoboda Steven Torvey Michael Krehan Emil Persson Martin Mittring Mark Lee Peter Santoki Allan Green Stephen Hill

41 Thank you

42 References [Hargreaves] Shawn Hargreaves, “Deferred Shading”, [Lobanchikov] Igor A. Lobanchikov, “ GSC Game World‘s S.T.A.L.K.E.R : Clear Sky – a showcase for Direct3D 10.0/1”, [Mittring] Martin Mittring, “A bit more Deferred – Cry Engine 3”, more-deferred-cry-engine3 more-deferred-cry-engine3 [Lee] Mark Lee, “Resistance 2 Prelighting”, [Lengyel] Eric Lengyel, “Advanced Light and Shadow Culling Methods”, [Placeres] Frank Puig Placeres, “Overcoming Deferred Shading Drawbacks,” pp. 115 – 130, ShaderX5 [Shishkovtsov] Oles Shishkovtsov, “Making some use out of hardware multisampling”; [Swoboda] Matt Swoboda, “Deferred Lighting and Post Processing on PLAYSTATION®3, [Tovey] Steven J. Tovey, Stephen McAuley, “Parallelized Light Pre-Pass Rendering with the Cell Broadband Engine TM ”, to appear in GPU Pro – Advanced Rendering Techniques, AK Peters, March [Thibieroz04] Nick Thibieroz, “Deferred Shading with Multiple-Render-Targets,” pp. 251 – 269, ShaderX2 – Shader Programming Tips & Tricks with DirectX9 [Thibieroz] Nick Thibieroz, “Deferred Shading with Multisampling Anti-Aliasing in DirectX 10”, ShaderX7 – Advanced Rendering Techniques, pp. ??? - ??? [Valient] Michael Valient, “Deferred Rendering in Killzone 2,”

Download ppt "Light Pre-Pass -Deferred Lighting: Latest Development- by Wolfgang Engel August 3rd, 2009."

Similar presentations

Ads by Google