4GC Fuji LINING LC Paste Pak ™ Radiopaque Light-Cured Glass Ionomer Lining Material
5GC Fuji LINING LC Paste Pak PRODUCT DESCRIPTION• Light-Cured Glass Ionomer Lining Material• Used as base or liner under composite resin or amalgam restorations• Paste-Paste Formulation• Bonds well to tooth structure, composite and metal• Minimizes sensitivity• Provides long-term fluoride release
6GC Fuji LINING LC Paste Pak THE IDEAL DENTIN SUBSTITUTE• Flexes and absorbs the stresses caused by polymerization shrinkage, as well as thermal expansion and contraction of composite resin materials.• Toothlike coefficient of thermal expansion maintains the marginal integrity.• Acts as a thermal insulator.
7GC Fuji LINING LC Paste Pak EXCLUSIVE PASTE PAK DISPENSING SYSTEM• Anyone can dispense exact mixing ratio• No droplet sizing. No half scoop calculations. No waste.• Adjust the metering slide and dispense the exact amount of material needed.MORELESS
8GC Fuji LINING LC Paste Pak EXCLUSIVE PASTE PAK DISPENSING SYSTEM• Squeeze out as little or as much as needed - Paste Pak delivers exact mixing ratio for optimized physical properties.• Anyone can get a good mix with Fuji Lining LC Paste Pak.
9GC Fuji LINING LC Paste Pak SIMPLE TO USE AND EASY TO MIX• Insert Paste Pak into dispenser - twist into position.• Dispense desired amount of material.• Replace cap to keep material fresh.• Mix with spatula for 10 seconds.
10GC Fuji LINING LC Paste Pak PERFECT MIX EVERY TIME• Paste Pak Dispensing System always attains 1.0:1.1 Mix Ratio.• Ideal Mix Ratio for best possible physical properties.• Enough material for applications.
11GC Fuji LINING LC Paste Pak LIGHT-CURES IN 20 SECONDS• Standard Curing Light (470nm)• Restoration can be completed immediately with amalgam or composite.
12GC Fuji LINING LC Paste Pak EXCELLENT HANDLING• Mixed to ideal consistency every time.• Does not “slump” when used as a liner.• Spreads easily to level floor or walls of a prepared cavity.
13GC Fuji LINING LC Paste Pak HIGHER FLUORIDE RELEASE• Sustained, long-term fluoride release helps prevent secondary caries and recurrent decay.• Reduces risk of decay at margins.• Fluoride release is recharged with use of fluoridated rinse or dentifrice.
14GC Fuji LINING LC Paste Pak STRONG IONIC BOND• Very high bond strength, tensile bond strength and diametral tensile strength.• Strong bond to tooth structure, composite resin and metal.• Reduces the likelihood of marginal fractures.• Optimizes marginal seal of the final restoration.
16GC Fuji LINING LC Paste Pak MINIMIZES SENSITIVITY• One of the most predictable methods of preventing postoperative tooth sensitivity.• Acts as a thermal insulator.• Toothlike coefficient of thermal expansion maintains marginal integrity.• Low modulus of elasticity enables material to flex and absorb stresses.
17GC Fuji LINING LC Paste Pak RADIOPAQUE AND BIOCOMPATIBLE• Radiopacity similar to dentin.• Completely biocompatible - not irritating to tooth structure, soft tissue or pulp.