ABOUT RAVE An aerospace quality manufacturing company whose undertaking is the supply of high quality, cost-effective machining, gears and gear shafts with shared customer focus on meeting delivery purchase order commitments through transparency and trust. We believe in employee development, investment in advanced technology and continuous improvement. Our customer’s business is our business.
Achievements ISO 9001:2008 QUALITY SYSTEM AS9100 in March 2014 MANUFACTURING FOR SPACEX DRIVETEC PRODUCT LINE FOR NASCAR OILFIELD INDUSTRY Down Hole Tooling and Instrumentation REVERSE ENGINEERING AND DESIGN CLOSED LOOP GEAR MANUFACTURING Thomas Alaniva, VP of our Gear Division is one of the pioneers of Closed Loop Gear Manufacturing in the US.
Achievements PRECISION MANUFACTURING CLOSE TOLERANCES +/-.0001 REM FINISHING 1 TO 3 Ra (MIRROR) HIGH EFFICENCY/PERFORMANCE GEARS USING LATEST ENGINEERING EQUIPMENT AND SOFTWARE DEVELOPING GERMAN LONG LEAD TIME OIL/GAS HYD. PUMPS TO SELL IN HOUSE, ALLOWING FOR IMMEDIATE SUPPLY. NEW STATE OF THE ART MACHINING AND GEAR EQUIPMENT TOP CUSTOMERS SPACEX, HALLIBURTON, BAKER HUGHES, BELL HELICOPTER, ROBINSON HELICOPTER, NASCAR, THOMAS INSTRUMENTS, DANA CORP.
Awards STATE OF TEXAS SMALL BUSINESS AWARD FOR EXCEPTIONAL PLANT DEVELOPMENT APPROVED MINORITY OWNED SMALL BUSINESS FOR SOUTH CENTRAL TEXAS ENTREPRENEUR OF THE YEAR AWARD FROM THE SEGUIN ECONOMIC DEVELOPMENT COUNCIL
Different Company We are also ISO 9001: 2008 certified. We are registered with ITAR, US Government’s SAM (System for Award Management) as well as NATO. We are committed to Quality from Day 1. AS9100 Certification March 2014 We have built this company from ground up with brand new climate controlled facility with state of the art machinery and experienced professionals-who also happen to think out of box!
People Nick Patel: CEO, Successful entrepreneur with over twenty years in business and over four (4) years with Arrow Gear Vinay Shah: COO, Over ten (10) years with State Government as Engineer, sixteen (16) years in business Bruce Roberge: President, Over thirty seven(37) years in gear industry in engineering and project management at Northstar Aerospace and Arrow Gear
People Nathan Massey: Vice President, Comes from two generations in machining, grinding, fabrication and seven (7) years experience in gear box design. Magan Patel: VP, Engineering, Over thirty years of experience including fifteen (15) years at Arrow Gear and twenty three (23) at Solar Turbine-Caterpillar subsidiary Thomas Alaniva: VP Gear Division, Over twenty seven (27) years experience in gear manufacturing Melissa Bauer: Quality Manager, Over twenty seven (27) years in Aerospace Quality Assurance including Quality Engineer and Supervisor positions at Northstar Aerospace Anthony W. Fedor III: Manufacturing Manager, Over twenty seven (27) years in Manufacturing Kush Patel: Engineer, Texas A & M graduate
Equipment MILL/TURN NEW! NT5400SZ – 9Axis Turning and Milling Center (36.2” x 75.6”) NEW! NLX2500SY Dual Spindle Mori Seiki Lathe (14” x 27”) TURNING NEW! CNC MAZAK QTS 350 (28” X 50”) MILLING NEW! NVX5100 II /50 Taper, 4 th Axis (41.3” x 20.87”x 20”) NEW! Haas VF-2SSYT, Super-Speed 12,000 RPM (30" X 20" X 20“) NEW! Haas EC-1600YZT, Integrated 4 th axis 10,000 RPM (64" X 50" X 40“) CYLINDRICAL GRINDING NEW! 2012 CNC Studer Favorit (13.8” x 39”) GEAR GRINDING -Gleason 450HG Bevel Gear Grinder
Equipment TESTING AND INSPECTION -MagWerks PSAH-545 54” Magnetic Inspection -Nital Etch Line -Gear Teeth Hardness Tester -Digital Superficial Rockwell Hardness Tester-on order -Starrett HB-400 Optical Comparator -J & L Classic 14T Optical Comparator -Gagepack Calibration Systems for Precision Gages and Equipment Control -Discus (FAI) Software Systems
Expansion ADVANCED MACHINES: MULTI AXIS, MULTI OPERATION INCREASED GEAR GRINDING CAPABILITIES HEAT TREATMENT: RAVE THERMAL ADDITIONAL BUILDING: 30, 000 SF LAND: TOTAL 40 ACRE SITE
Thank You! We thank you for interest in our company. We appreciate your feedback.
Your consent to our cookies if you continue to use this website.