Presentation on theme: "Emulsions are suspension of droplets, greater than 0,1 micron in diameter, consisting of two completely immiscible liquids, one of which is dispersed throughout."— Presentation transcript:
Emulsions are suspension of droplets, greater than 0,1 micron in diameter, consisting of two completely immiscible liquids, one of which is dispersed throughout the other. The most widely used method of treating oil emulsions is chemical demulsification. Poliflock trademark demulsifiers are high efficiency mixture of one or several substances for water in oil or oil in water separation. These products have powerfull wetting properties causing quick and effective emulsions separation. As the result of intensive development it is available wide range of Poliflock demulsifiers.
Poliflock brand demulsifiers can be used for emulsion breaking in following processes: petroleum and petrochemicals refining and processing oilfield produced water treatment tanker ballast water treatment tramp oils from machine tool coolants utility operations, sanitary sewage, contaminated surface runoff Slop oil spillages and separation processes.
Poliflock demulsifiers are used with following equipment: Three-phase decanters Skimmers Separators Flotation units Hydro cyclones Centrifuges Filters Coalescing units
Usually stable oil emulsions can contain up to 40 -60 % of water. It is common that slop oil forms such a stable emulsions that even after long time heating in separation towers low or almost no separation appears. Heat is usually required to resolve water in oil emulsions. After adding Polifloc demulsifier it is possible achieve 5 to 0 % water content in oil. Typical dosages are 0,5-6kgs/m3 of emulsion. The adjustment of pH can be neccessary.
Poliflock range demulsifiers: Poliflock SM 01A Poliflock SR 4567 Poliflock SR 4567-s Poliflock SM 1001 Poliflock SM 01B Poliflock SM 01C Poliflock SM 01D Poliflock SM 01E Poliflock SM 251 Poliflock SM 11 Poliflock SM 12 Poliflock SM 01D Poliflock SM 01E
Poliflock demulsifiers benefits: Provides rapid, sharp three phase separation No heavy metals or organic halides added Covenient to handle, easily dispersed
For inquieries and technical consultations: UAB Ekotakas Savanorių 435 Kaunas LT 49280 Lithuania/EU Tel +37037407039 Fax. +37037407038 E-mail: email@example.com Thank you for attention!