We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byIzaiah Stickler
Modified about 1 year ago
Domestic GDA Training – Annex A Methodology for Amendments…1Training Material © Stroma Certification 2012 | Version 1.0 ABBE Level 3 Diploma in Domestic Green Deal Advice Annex A: Methodology for Amendments to SAP for Occupancy Assessment ① Methodology for Amendments to SAP for Occupancy Assessment Presented by [Name]
Domestic GDA Training – Annex A Methodology for Amendments…2Training Material © Stroma Certification 2012 | Version Energy for Water Heating At SAP worksheet (42) use the actual number of occupants from the Occupancy Assessment (OA) instead of the formula. At worksheet (43) use the following formulation. V d,average (litres/day)=V d,shower+ V d,bath+ V d,other Where V d,shower (litres/day)=Showers per day * hot water per shower from table below V d,bath (litres/day)=Baths per day * 50.8 litres V d,other (litres/day)=9.8 * N + 14 Where N is the actual number of occupants. Showers and baths per day comes from the OA. If showers per day is unknown then: Showers per day = 0.45 * N If the number of baths per day is unknown then: Baths per day (no shower present) = 0.35 * N Baths per day (shower also present) = 0.13 * N (A bath is assumed to be present even when bathing data has not been provided.)
Domestic GDA Training – Annex A Methodology for Amendments…3Training Material © Stroma Certification 2012 | Version Energy for Water Heating Continue as for normal SAP assessment from worksheet (44). * Combi applies when the water is heated by a combi boiler. Not combi applies in all other cases. Shower TypeHot water used per shower (litres) None0 Mixer (not combi)*28.8 Mixer (combi)*44.4 Pumped43.5 Electric0 Unknown18.7
Domestic GDA Training – Annex A Methodology for Amendments…4Training Material © Stroma Certification 2012 | Version Calculation of Space Heating 2.1 Heating systems A3 in SAP Appendix A, which is concerned with assigning heating to all rooms, does not apply. In the occupancy assessment, unheated rooms are treated as such and do not have heaters assigned to them. If the occupancy assessment has identified main and secondary systems that are different from the RdSAP assessment, use those from the occupancy assessment. Continued…
Domestic GDA Training – Annex A Methodology for Amendments…5Training Material © Stroma Certification 2012 | Version Calculation of Space Heating 2.2 Proportion of heat from each system Secondary heating a) If secondary in living room, include secondary fraction from SAP Table 11. b) If secondary in another room, disregard if main heating also supplies the room. c) If secondary in another room and no main heating in the room, include the room with a weighting factor of 0.25 and divided by the total number of rooms other than living room. d) total the above fractions Two main systems If there are two main systems, add up the number of rooms served by each system, giving a weighting of 1.5 to the living room (because it is usually larger) and 1 to other rooms. Assign 0.5 to each system where a room is served by both systems, and multiply by 0.5 for any room that has been marked as partially heated Rounding Round secondary fraction and main 2 fraction to two decimal places. An accompanying spreadsheet illustrates the above procedure.
Domestic GDA Training – Annex A Methodology for Amendments…6Training Material © Stroma Certification 2012 | Version Calculation of Monthly Internal Temp. SAP Table 9 is adapted as follows: Table 9 (occupancy assessment): Heating periods and heating temperatures Living AreaElsewhere Temperature T hl (°C) Hours of heating off t off Heating control type (Table 4e) Temperature T h2 °C Hours of heating off t off T d from the occupancy assessment a Up to 4 periods from the occupancy assessment 1T h1 – 0.5 HLPSame as living area 2T h1 – HLP HLP²Same as living area 3T h1 – HLP HLP²see b below a If unknown use 21°C b if the number of off periods for the living area is 1 and is less than 12 hours duration include it plus a second off period of duration 9 hours; otherwise the shortest off period plus 2 hours and the other periods the same as the living area If HLP > 6.0 use HLP = 6.0 for calculation of T h2
Domestic GDA Training – Annex A Methodology for Amendments…7Training Material © Stroma Certification 2012 | Version Calculation of Monthly Internal Temp. Calculate MIT h,m for the heated rooms and applicable heating systems and controls (SAP Tables 9, 9b and 9c) leading to worksheet (93). Suffix h denotes heated and m is the month number. In SAP Table 9c replace T weekday and T weekend by T normal = T h – (u 1 + u 2 + u 3 + u 4 ) T alternative = T h – (u 1 + u 2 + u 3 + u 4 ) And Mean temperature = (n normal T normal + n alternative T alternative ) / 7 Where u 1, u 2, u 3 and u 4 are related to the hours of heating off as defined in SAP Table 9b. Continued…
Domestic GDA Training – Annex A Methodology for Amendments…8Training Material © Stroma Certification 2012 | Version Calculation of Monthly Internal Temp. If all rooms are heated set MIT m = MIT h,m to calculate the space heating requirement for each month. If there are any unheated rooms: a)Calculate the mean temperature MIT u,m in the unheated rooms from f u = n u / n total H 2,m = H m x f u G 2,m = G s,m x f u MIT u,m = In which H m is worksheet (39), n u is the number of unheated rooms, n total is the total number of rooms, G s,m are the solar gains for month m and H 3 is 100 W/K. b) Set MIT m = (1 - f u ) x MIT h,m + f u x MIT u,m MIT h,m X H 3 + T e,m X H 2,m + G 2,m H 3 + H 2,m
Domestic GDA Training – Annex A Methodology for Amendments…9Training Material © Stroma Certification 2012 | Version Cooking & Electrical Appliances The energy use for cooking and electrical appliances is estimated and included in the total energy for the purposes of comparing with fuel bills. The data given in this section replaces that in SAP Appendix L. Also there are some modifications to internal heat gains for cooking and electrical appliances. 4.1 Cooking The energy required for cooking, EC (kWh/yr), is a function of the actual number of occupants and the type of cooker. The following equations should be used: Electric cooker: E C = * N Gas cooker: E C = * N Gas/electric cooker: E C = * N (elec) E C = * N (gas) Range cooker (any fuel): E C = * N N is the actual number of occupants. Monthly totals, E C,m (kWh/month), are then calculated as follows: E C,m = E C / 365 * n n Assume half of E C,m is used by the hob and half by the oven, except in the case of ‘gas/electric cooker’, for which the amounts for each are explicitly calculated, as described above.
Domestic GDA Training – Annex A Methodology for Amendments…10Training Material © Stroma Certification 2012 | Version Cooking & Electrical Appliances Additional energy requirement for ranges Ranges stay hot all the time, producing a significant amount of heat. The energy they use for cooking has been accounted for in the equations above, but the additional energy they use when not cooking, E R,m (kWh), must also be considered. E R,m = Q R * f r * * n m - E C,m Q R is the average fuel consumption rate of the range cooker in watts. Use 2000W for a range burning fossil fuel or 1500W for an electric range. f r is the efficiency with which the range converts fuel into heat. For a range burning fossil fuel use a figure of 60%; for an electric range use 100%.
Domestic GDA Training – Annex A Methodology for Amendments…11Training Material © Stroma Certification 2012 | Version Cooking & Electrical Appliances 4.2 Appliances L2 and L3 in Appendix L do not apply and the following is used instead for electricity use by appliances and the resulting internal heat gains Tumble dryer Use the following equation to estimate the annual electricity requirement for tumble drying, ETD (kWh/yr). E TD (kWh/yr) = (78.4 * N + 166) * f TD / 0.5 f TD is the fraction of clothes drying done using a tumble dryer, from the OA Cold appliances The electricity requirement for cold appliances, E cold (kWh/yr), is equal to product of the number of each appliance and the assumed use per appliance given in the following table: Cold appliance typeTypical consumption (kWh/yr) Fridge-freezer500 Refrigerator200 Freezer300
Domestic GDA Training – Annex A Methodology for Amendments…12Training Material © Stroma Certification 2012 | Version Cooking & Electrical Appliances Other appliances Use the following equation to estimate the annual energy consumption for ‘other’ appliances, E Aother, in kWh: E A,other = * (TFA * N) Add this to the electrical consumption calculated for cold appliances and tumble drying to get the total electrical consumption for appliances, E A (kWh/yr): E A = E A,other + E TD + E cold Monthly values, E A,m (kWh/month), are then calculated as in the normal SAP calculation using: E A,m = E A * [ * cos(2π(m ) / 12] * n m / 365 Where: m is the month number (1 = Jan, 12 = Dec) n m is the number of days in the month
Domestic GDA Training – Annex A Methodology for Amendments…13Training Material © Stroma Certification 2012 | Version Cooking & Electrical Appliances Showers Calculate the electricity used for showers: E shower,m (kWh/month) = Showers per day * electricity use per shower from table below * n m where n m is the number of days in the month Electricity standing charge Add £52 to the electricity cost total. This applies in all cases and is in addition to any standing charge for electricity applied within the SAP calculations. Shower TypeElectricity used per shower (kWh) None0 Mixer (not combi*)0 Mixer (combi*)0 Pumped0 Electric0.93 Unknown0.45
Domestic GDA Training – Annex A Methodology for Amendments…14Training Material © Stroma Certification 2012 | Version Internal Gains Internal heat gain is calculated as in SAP Table 5 column (A), with the exception of electric showers and cooking appliances. The heat gain from electric showering is a new category which needs to be added in. Cooking is dealt with differently for the OA. Both calculation methods are described next. Gains from electric showers For electric showers 25% of the electricity used is assumed to contribute usefully to the internal gains: G shower,m (W) = 0.25 * E shower,m / (0.024 * n m ) The above is used in addition to the items from SAP Table 5. Continued…
Domestic GDA Training – Annex A Methodology for Amendments…15Training Material © Stroma Certification 2012 | Version Internal Gains Gains from cooking appliances The following table of cooking gains factors, f cg (dimensionless), describes what proportion of cooking energy is assumed to contribute to useful heat gains. For gas hob/electric oven, apply The gains from cooking, G C,m (W), is therefore: G C,m = E C,m *f cg / (0.024 * n m ) The above is used instead of the value from SAP Table 5. In addition 75% of the (non-cooking related) heat output from range cookers is assumed to be useful, G R,m (W), so this is also added to the total: G R,m = E R,m *0.75 / (0.024 * n m ) Cooking fuel/typeCooking gains factor Gas (inc. LPG)0.75 Electricity0.9 Gas/Electric0.825 Range (electric)0.9 Range (fossil fuel)0.6
Domestic GDA Training – Annex A Methodology for Amendments…16Training Material © Stroma Certification 2012 | Version Bill Data Reconciliation 6.1 Predicted fuel usage Obtain the calculated total annual energy use by fuel. Include all end uses (those additional to a normal SAP calculation are shown in italics): Main space heating Second main space heating Secondary heating Heat supplied by range Main water heating Alternative water heating (i.e. summer immersion) Fuel used by electric shower (always electricity) Lighting (always electricity) Appliances (incl. tumble dryer + cold appliances) (always electricity) Pumps and fans (always electricity) Cooking (hob) Cooking (oven) [can be different fuel from hob] Include the standing charge for electricity, gas, LPG and community heating.
Domestic GDA Training – Annex A Methodology for Amendments…17Training Material © Stroma Certification 2012 | Version Bill Data Reconciliation 6.2 Energy used from fuel bills Obtain total number of units purchased and scale to one year. Where the unit is other than kWh, convert using the following calorific values: Fuel and unitkWh per unit LPG, litres7.11 LPG, kg13.89 Oil, litre10.35 Coal, kg8.34 Smokeless, kg8.90 Anthracite, kg9.66 Wood, kg4.70
Domestic GDA Training – Annex A Methodology for Amendments…18Training Material © Stroma Certification 2012 | Version Bill Data Reconciliation 6.3 Adjustment of predicted energy use The occupancy assessment data provides a reliability indicator for each fuel: Continued… Reliability indicator Description 1Gas or electricity based on actual meter readings 2Gas or electricity based on estimated reading, or oil/LPG based on invoices/receipts 3Solid fuel based on invoices/receipts 4Unknown, includes fixed charge community heating 5Unusual energy-using item affecting this fuel
Domestic GDA Training – Annex A Methodology for Amendments…19Training Material © Stroma Certification 2012 | Version Bill Data Reconciliation If the reliability indicator is 4 or 5, omit the reconciliation process for that fuel. Otherwise (reliability indicator 1, 2 or 3) for each fuel obtain the ratio of calculated energy used to the energy used from the bill data (see 6.2). For example, if electricity use is 30% higher than predicted, and the household has an electric cooker and electric secondary heaters, increase the predicted energy use for appliances, lights, cooking and secondary heating by 30% so that the total electricity use matches. Apply this to all fuels. The same adjustment factors are to be applied when re-running the calculation to work out the savings from measures, for example: Uncorrected gas use = 25,000 kWh/yr Billed gas use = 20,000 kWh/yr Correction factor = 20,000/25,000 = 1.25 The same factor of 1.25 is to be applied to all subsequent gas consumption results.
Domestic GDA Training – Annex A Methodology for Amendments…20Training Material © Stroma Certification 2012 | Version Bill Data Reconciliation 6.4 Tariffs Where tariff data is available, amend the fuel prices used to calculate annual costs and savings as follows. In general there is an annual standing charge (£/year) and a unit price (p/kWh). In the case of off-peak electricity there are high-rate and low-rate unit prices. For mains gas and electricity: - where a standing charge is applicable, scale it to one year: e.g. if given in p/day, multiply by 365 and divide by 100 to give £/year. If given in £/quarter, multiply by 4 and round to nearest £1. -where two unit prices apply (initial units per period and follow-on units), obtain the difference in price between initial and follow-on units, scale to one year, round to nearest £1 and assign to standing charge: e.g. 600 kWh per 8p, rest at 3p: standing charge = 0.01 x 600 x (8.0 – 3.0) x 4 =£120 - set the unit price to the follow-on unit price for off-peak tariffs set the standing charge and the high-rate unit price as above, and the low-rate unit price is as given For other fuels: - where a fixed cost applies and if the data is for other than 12 months, scale it to 12 months, round to nearest £1 and assign to standing charge (otherwise standing charge is 0) - divide cost for unit-based purchases by number of units purchased and assign to unit price
Domestic GDA Training – Annex A Methodology for Amendments…21Training Material © Stroma Certification 2012 | Version In-use Factor for Energy Cost Savings In-use factors (<= 1.0) have been defined for each improvement measure and are applied to cost savings to reflect underperformance that has been found for some measures and to ensure that the savings are not over-estimated. Multiply the cost saving for each improvement measures by the in-use factor for the improvement measure concerned. A table of in-use factors will be published separately.
Domestic GDA Training – Annex A Methodology for Amendments…22Training Material © Stroma Certification 2012 | Version Display of Fuel Cost Savings on OA The fuel cost savings for the actual household are shown as a range which depends on the reliability indicator (see 6.3). The above percentages are to be reviewed following trials. Reliability indicator Range 1 Range calculated as: multiply £ saving by 2 x percentage, round to nearest £10, set to £10 if less than or 5
Domestic GDA Training – Annex A Methodology for Amendments…23Training Material © Stroma Certification 2012 | Version 1.0 Questions?
Domestic GDA Training – Annex A Methodology for Amendments…24Training Material © Stroma Certification 2012 | Version 1.0 Stroma Certification Ltd. 4 Pioneer Way, Castleford, WF10 5QU Web Links Contacts
Domestic GDA Training – 12. Green Deal Occupancy Assessment1Training Material © Stroma Certification 2013 | Version 1.1 ABBE Level 3 Diploma in Domestic.
LAST SECTION OF CHAPTER 12 AND OF THE ENTIRE ELECTRICITY UNIT Reducing Our Electrical Energy Consumption.
Lesson 14. Electrical Energy Use in the Home Last week we calculated how much energy appliances use and how this correlates to the length of time that.
R EDUCING E LECTRICAL E NERGY C ONSUMPTION Lesson 12A.
CITY OF LEOMINSTER. Customer Charge The cost of providing customer related service such as metering, meter reading and billing. These fixed costs are.
Electricity production and consumption. Typical Daily Domestic Demand Profile (www.dti.gov.uk) Typical Domestic Electrical Load???
12.2 R EDUCING E LECTRICAL E NERGY C ONSUMPTION pp
Energy Conservation Energy Management. Role of an energy manager Assess Assess Current energy demand Current energy demand Energy audit Energy audit Analyse.
Household Electricity. Generating Electricity An electric generator converts a mechanical power source into electricity The United States used coal, methane,
Examples Economics and EROEI for Conservation and Solar Power Systems.
Section 3: Energy Use by Sector & Energy Conservation by Fuel Switching Dr. Congxiao Shang Room No.: 01 37P ENV-2D02 (2006):Energy Conservation – power.
Energy Basics Understand it, Control it and Save.
ENERGY CONSERVATION. Types of Energy Energy can be broadly divided into two categories- Renewable Energy Non Renewable Energy.
Getting Started A Beginner’s Household Energy Audit Jim Lambert.
Energy Efficiency. An incandescent light bulb uses about 5% of its input energy to create light and converts 95% of its input energy into heat.
Utility Analysis. Baseline Electricity Analysis Understanding and documenting current energy use is called developing a baseline. Developing a baseline:
GREEN FIEND ENERGY & ENVIRONMENT Energy Conservation.
SOURCES OF ENERGY SMART METER LANE ENERGY CONSUMPTION ENERGY CONSERVATION WILD CARD
A Two-Level Electricity Demand Model Hausman, Kinnucan, and Mcfadden.
ENERGY AUDITS & ELECTRICITY BILLS Energy & Environment.
Chapter 9.2 What is Power? Energy is what costs money Power is the rate at which energy is being transformed (or consumed) Energy is measured.
Slide 1 B O N N E V I L L E P O W E R A D M I N I S T R A T I O N Energy Savings from Electric Water Heaters in Commercial Applications Danielle Gidding.
Farmers Rural Electric Cooperative Corporation 2006 Load Forecast Prepared by: East Kentucky Power Cooperative, Inc. Forecasting and Market Analysis Department.
Electrical energy is an important form of energy because many modern machines use it as a source of power and it can be easily converted into other forms.
Blue Grass Energy Cooperative Corporation 2006 Load Forecast Prepared by: East Kentucky Power Cooperative, Inc. Forecasting and Market Analysis Department.
Usually, the red numbering is ignored for the bills. What are the readings on these two meters?
Electricity Units and Calculations. Science as process The scientific process is often collaborative to improve ideas and understanding. I’ll be giving.
1 PRODUCTION OF A MANUAL FOR STATISTICS ON ENERGY CONSUMPTION IN HOUSEHOLDS MESH PROJECT 3 th Working Meeting Vienna, 3 th May 2012 WP2: DISCUSSION OF.
Math for APES Reviewing and Practicing the Energy Math Tuesday, March 8 th, 2016.
S Explain parallel circuits, components, and safety of house wiring. S Develop a formula for power consumption and solve related problems.
Grayson Rural Electric Cooperative Corporation 2006 Load Forecast Prepared by: East Kentucky Power Cooperative, Inc. Forecasting and Market Analysis Department.
Ductless Heat Pumps Determining Cost Savings Example Gary Nordeen Bill Kingrey, P.E. 11/5/08 AFE Webinar.
Off Grid Living Without a Generator Solar Powered AC Coupled Micro Grid © Boyd Solar corp. Didsbury, AB
Introduction to Nest- Care & Repair Caseworkers’ Forum February 2012.
Kay’s Sweet Cakes By: Samantha Gray. Reducing Carbon Footprints Turn off all of the equipment used for baking Find energy efficient ovens Limiting the.
Electrical energy consumption Section 9. Lighting 40 Watts 100 Watts 60 Watts.
10 Energy Saving Advices. 1- Lowering of the temperature at night Limit the lowering of the temperature at night. If the temperature is reduced too much,
1. The diagram below shows the steps necessary to produce the energy needed to run a hair dryer. As it moves from location A to location D in the diagram,
10 Ways to Save Energy in the Home. 1. Shut the Curtains at Dusk Make sure that they don’t hang in front of the radiators or the outside wall will benefit.
DHP for Houses with Electric FAF Research Plan: Revisions Adam Hadley, Ben Hannas, Bob Davis, My Ton R&E Subcommittee February 25, 2015.
PREPARE A BUDGET 10-1Utility Expenses 10-2Electronic Utilities 10-3Charting a Budget 10-4Cash Flow and Budgeting 10.
Average Annual Fuel Oil Consumption on Campus Average amount of gallons used per year is 53,902.
SOLAR ECONOMIC ANALYSIS Although the resource of a solar energy system, that is, the solar irradiation, is free, the equipment required to collect it and.
Energy Awareness Training Objective To educate your team members on the power they use at home so they can better control what they use and save $$$
Principles of Electric Circuits - Floyd© Copyright 2006 Prentice-Hall Chapter 4 Summary Energy Energy, W, is the ability to do work and is measured in.
Principles of Electric Circuits - Floyd© Copyright 2006 Prentice-Hall Chapter 4.
Calculating Energy Use and Converting Units Chapter 2.
Section 7.3 Electrical Energy Circuits are pathways for electricity to flow. – Unlike static electricity, which is short-lived and fast, current flowing.
Energy Efficiency Workshop Saving Energy & Lowering Utility Bills Copyright © 2010 Portland General Electric Inc. All rights reserved.
Energy Calculations Revision Energy = Power x Time (Joule) (Watt) (Second) Energy Power x Time Example 1: How much energy does a 40 Watt bulb use in 2.
© 2017 SlidePlayer.com Inc. All rights reserved.