Presentation is loading. Please wait.

Presentation is loading. Please wait.

Altai Super WiFi 1 Not for Distribution – Altai Confidential Altai Super WiFi Altai Certification Training Configuration Professional Services Altai Technologies.

Similar presentations


Presentation on theme: "Altai Super WiFi 1 Not for Distribution – Altai Confidential Altai Super WiFi Altai Certification Training Configuration Professional Services Altai Technologies."— Presentation transcript:

1 Altai Super WiFi 1 Not for Distribution – Altai Confidential Altai Super WiFi Altai Certification Training Configuration Professional Services Altai Technologies Limited

2 Altai Super WiFi 2 Not for Distribution – Altai Confidential Altai Super WiFi Module Outline AP Default Settings A8 Basic Configurations A8 Advanced Configurations 5GHz Bridge Mode Configuration A8-A2 Bridge Mode Configuration A8-C1 CPE Mode Configuration A8-Ein/A8n Configurations

3 Altai Super WiFi 3 Not for Distribution – Altai Confidential Altai Super WiFi AP Default Settings A8/A8-Ei/A8-i default IP address FW Username: altai Password: wag A2/A2e default IP address FW Username: altai Password: wag A8-Ein/A8n default IP address FW Username: root Password: superwifi123 C1 management IP address FW Username: altai Password: wag

4 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 4 A8 Basic Configuration

5 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 555 Configuration Case A8 Basic configurations: Regulatory domain: RoW Disable DHCP Client (Static IP Address) IP Address: Subnet mask: Default gateway: Wireless mode: b/g mode Radio frequency: To be determined by Channel Scan result Transmitting power: 25dBm VAP 0 (Management and normal service VAP) SSID: WiFi_mgt Suppressed SSID: Enabled Maximum Clients: 10 Wireless security: WPA-PSK + AES VAP 1 (For service only VAP) SSID: WiFi_Service Maximum Clients: 256 Wireless security: WPA-PSK + AES

6 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 666 Tools>Channel Scan Click to start channel scan All the clients traffic would be interrupted during the channel scan test.

7 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 777 Click to show Noise Floor Channel Scan Success Tools>Channel Scan

8 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 888 Key Considerations: 1.Num of SSID 2.Neighbor SSID 3.Usage 4.Noise level Tools>Channel Scan

9 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 999 FCC (US Standard) – 2.4GHz Max EIRP 36dBm ETSI (European Standard) – 2.4GHz Max EIRP 20dBm RoW (Rest of the world) – 2.4GHz Max EIRP 60dBm Select A8 Click Save to batch the changes Configuration>System

10 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 10 Recommend “Static IP” Static IP, subnet mask and default gateway configuration (Default IP address: ) Click Save to batch the changes Configuration>Network

11 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 11 Configuration>2.4G Wireless AP>General Select channel: ETSI/RoW Ch1-13 FCC Ch1-11 Wireless mode (802.11b Max 11Mbps, b/g Max 54Mbps, g Max 54Mbps)

12 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 12 Configuration>2.4G Wireless AP>Sectors Maximum Tx Power 25dBm Antenna Gain - Cable Loss + Tx Power ≤ Max EIRP

13 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 13 Configuration>2.4G Wireless AP>VAP Basic Set SSID A8 will not broadcast SSID Default value: 256 Enabled allows traffic to pass between stations in a VAP. For mgt VAP, recommended enable. For normal service VAP, disable. Click Save to batch the changes Remark: VAP 0 usually acts as management VAP so it only allows small number of wireless clients and hidden its SSID. VAP 1 acts as normal service VAP so it sets maximum clients. Normal Service: Allow to access Internet Management: Allow to access the A8 web interface. Only VAP 0 has this configuration. Enable VAP

14 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 14 Inter/Intra-VAP Traffic Control The feature:  Traffic among clients of the same SSID/VAP can be blocked  Traffic among clients of different SSID/VAP can be blocked The user benefit:  Improved network security  Better network traffic control SSID 1 SSID 2 Inter-VAP traffic blocked Intra-VAP traffic blocked A8A8

15 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 15 Configuration>2.4G Wireless AP>VAP Basic Click Save to batch the changes Remark: VAP 0 usually acts as management VAP so it only allows small number of wireless clients and hidden its SSID. VAP 1 acts as normal service VAP so it sets maximum clients. Default: Access Can change to “Trunk”

16 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 16 Configuration>2.4G Wireless AP>VAP Security AuthenticationOpen Shared Key WPAWPA-PSKWPA2WPA2-PSK CipherDisable WEP AES/TKIPAES Key4 KeysRADIUSPassPhraseRADIUSPassPhrase

17 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 17 Highly Secure The user benefit:  Latest encryption and authentication support  Radio channel scanning and auto alarm for rogue AP The Altai technology:  SSID suppression, inter/intra-VAP traffic blocking  Rogue AP detection  WPA, WPA2-PSK, 802.1x (PEAP, TLS, TTLS) authentication, MAC address filtering  WEP, TKIP and AES encryption  Backup RADIUS server support

18 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 18 Reboot AP Click Reboot AP to apply all changes Click OK Wait for 30s to reload the web page

19 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 19 A8 Advanced Configuration

20 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 20 Configuration Case A8 configurations: Similar to basic configuration, except Network Operation Mode: Gateway Local IP Address: /24 NAT Mode: Enabled 2.4GHz DHCP Snooping Trusted Port: Disabled Bandwidth Control: Airtime: DL 30%, UL 30% Multicast Data Rate Control QoS and DiffServ Tag: Enabled Congestion Avoidance: FW-RED Access Link Safe Mode: Enabled Ping Host: Ping interval: 30s

21 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 21 Configuration Case VAP 0 (Management and normal service VAP) QoS Profile: Very High VAP 1 (For normal WiFi service only) QoS Profile: ToS/802.1Q VAP 2 (For surveillance camera, authenticated by RADIUS) SSID: WiFi_camera Maximum Clients: 15 QoS Profile: High Wireless security: WPA + AES Primary RADIUS Server: RADIUS Port: 1812 RADIUS secret: test

22 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 22 Configuration > Network>General Enable Gateway Mode Configure LAN port IP, subnet mask Recommended: FWRED Configuration > Network>NAT Enable NAT Mode Click Save to batch the changes

23 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 23 Congestion Avoidance The feature:  A8 can avoid congestion by dropping selected frames in the Tx queue when it is full based on one of the following mechanisms: 1) Tail Drop 2) Random Early Drop (RED) 3) Fair Weighted Random Early Drop (FWRED) (Altai patent pending) The user benefit:  Avoid congestion due to a few problem clients  Higher average throughput for the majority A8A8 Tx queue is FULL Tail drop – all last incoming packets will be dropped RED – most frequently occurred client packets will be dropped FWRED – highest airtime usage client packets will be dropped

24 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 24 Configuration > 2.4G Wireless AP>General Click Save to batch the changes 2.4GHz (unselected by default)

25 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 25 Configuration > 2.4G Wireless AP>General Click Save to batch the changes Ethernet (Trusted by default) 5GHz (Optional) 2.4GHz (Optional)

26 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 26 Client4 Client3 (DHCP Server) Client2 (DHCP Server) DHCP Snooping Trusted Port A8-1 A8-2 Client1 5G 2.4G DHCP Server Suppose A8 is in switch mode, all clients should get IP address from ethernet DHCP server, to avoid getting from client’s DHCP server, need to disable two A8s’ 2.4GHz trusted port and A8-1’s 5GHz trusted port. Ethernet x x x x x x means untrusted interface By default, Ethernet is trusted port

27 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 27 Bandwidth Control on Airtime/Throughput The operation:  2 modes of control - Throughput (in kbps) or Airtime (in % of occupancy)  Bandwidth limit can be set per VPA/client/uplink/downlink for both modes  Airtime control can prevent the low data rate (11b) clients from occupying too much airtime (throughput mode cannot solve this problem) Airtime controlled to 5% per station Throughput controlled to 250 Kbps per station

28 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 28 Configuration > 2.4G Wireless AP>Bandwidth Control Enabled Throughput VAP: Total bandwidth for one SSID Station: Total bandwidth for each wireless client Set value to specify the maximum bandwidth

29 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 29 Configuration > 2.4G Wireless AP>Bandwidth Control Enabled Airtime Set airtime value, default setting is 5%. Used to limit the use time of low data rate user.

30 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 30 Bandwidth Control Example Using the airtime bandwidth control feature with VAP set to 15% and Station set to 5%, the congestion problem was totally resolved. CPE client ping time improved from 3000 ms to 50 ms There are many low speed free WiFi users dragging down the performance of premium WiFi users BEFORE AFTER 3000 ms response time 50 ms response time

31 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 31 Configuration > 2.4G Wireless AP>General Enabled Multicast Traffic Choose Multicast Data Rate. Enabled IGMP Snooping Recommended low multicast data rate and IGMP snooping enabled Click Save to batch the changes Protection Mode (Auto) When 11b only client exists, protection mode is automatically enabled to use protection rate for either CTS or RTS-CTS packet.

32 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 32 Multicast Traffic Filter The feature:  A8 can be set to drop all multicast traffic  A8 can be set to limit multicast traffic to certain data rate The user benefit:  Limit unnecessary multicast traffic  Improve bandwidth utilization Source Multicast packets at high data rate Multicast packets can be limited to lower data rate

33 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 33 IGMP Snooping The feature:  Multicast traffic from a client in one SSID will only broadcast to the clients within that multicast group of the same SSID The user benefit:  Reduce multicast storm and unnecessary traffic  Improve bandwidth utilization SSID 1 SSID 3 SSID 2 Source Multicast packets SSID 1 SSID 3 SSID 2 Source With IGMP snooping, multicast packets will only be transmitted to the registered clients under the same SSID Without IGMP snooping, multicast packets will be transmitted to all clients across all SSIDs A8A8 IGMP : Internet Group Management Protocol

34 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 34 Configuration > Network>Backhaul Link Integrity Enable access link safe mode A8 pings to for every other 30s. If ping request timeout for 3 times, it reboots and enters safe mode with SSID: “SafeMode ”. Click Save to batch the changes

35 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 35 Highly Resilient The user benefit:  Complete backhaul protection  Mission critical proof  Improve network stability  Saves downtime cost The Altai technology:  Link Integrity – check link status from client up to the application servers  Backhaul Link Self Healing – automatic backhaul failover and recovery  Access redundancy – clients are at least covered by 2 or more A8  Access Link Safe Mode – automatic reboot with new SSID forcing client to release Multiple coverage by A 8 A8A8 A2A2 Resilient Backhaul Architecture Backhaul link self healing

36 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 36 Configuration > Network>QoS Enabling QoS adds traffic priority tag in the packets. DiffServ Tagging is effective after enabling QoS. ToS field of IP packets will be changed based on QoS policy configuration. QoS Profile: Very High, High, Normal, Low, ToS/802.1Q, IP ToS/802.1Q changes the tag basing on the packet type IP changes the tag basing on the port range and protocol Click Save to batch the changes Enabled QoS and DiffServ

37 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 37 Configuration > 2.4G Wireless AP>VAP Basic Enable VAP2 Set SSID Set 15 clients High QoS Click Save to batch the changes

38 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 38 Configuration > 2.4G Wireless AP>VAP Security Select WPA Click Update Select AES Enter RADIUS Server information Click Save to batch the changes

39 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 39 5GHz Bridge Configuration

40 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 40 Bridge Combinations A8-A a Mode Maximum Data Rate: 54 Mbps A2-A na HT40 ext ch +1/-1 Maximum Data Rate: 300 Mbps A8-A a Turbo + Bursting Mode + Fast Mode Maximum Data Rate: 108 Mbps

41 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 41 A8-A2 5GHz Bridge Configuration

42 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 42 Sample Solution Layout A8-A2 Bridge

43 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 43 5GHz Bridge A8 for large outdoor coverage A2: 450 m LOS Up to 1km LOS A2 for coverage & capacity enhancement Access Bridge: a backhaul link at 5GHz signal (802.11a) Example Configurations: A2 setups 5GHz bridge with A8 5GHz MAC address Enable a Channel 56 Enable AES (Recommended bridge security) A8 setups 5GHz bridge with A2 5GHz MAC address Enable a Channel 56 Enable AES All configurations on both sides must be the same, except MAC address 2km

44 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 44 Rogue AP Detection

45 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 45 Rogue AP Detection The feature:  Neighboring APs’ information is obtained by the channel scan function  The scanned neighboring AP list will be validated against the defined legitimate AP list (BSSID with MAC address info, SSID)  Rogue AP is declared if the validation with the legitimate AP list fails The user benefit:  Reduce security threats to the network  Auto alert & reporting with the use of AWMS  Useful tool for deployment Rogue AP Check against legitimate AP list in A 8 Legitimat e AP list A 8 is scheduled to perform channel scan Reporting through AWMS or remote access

46 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 46 A8: Status > Overview A8 5GHz MAC address Remark: The backside of AP unit also has 5GHz MAC address

47 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 47 A2: Configuration > 5G Radio 1. Select a mode 2. Click Update 3. Select Frequency 4. Type in Bridge Distance 5. A8 5GHz radio MAC address 6. Select AES 7. Type in Key 8. Click Update

48 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 48 A8: Configuration>5G Wireless Bridge 1. Select a mode 2. Click Save 3. Select Frequency 4. Type in Bridge Distance Click Save to batch the changes

49 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 49 A8: Configuration>5G Wireless Bridge>Remote Bridge 5. Type in A2 5GHz radio MAC address and click Add to List A8: Configuration>5G Wireless Bridge>Security 6. Select AES 7. Type in Key Click Save to batch the changes

50 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 50 A8: Status > 5G Wireless Bridge State Up: associated Inactive: disconnected

51 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 51 A8: Status > 5G Wireless Bridge Maximum Data Rate 11a mode: 54Mbps

52 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 52 A2-A2 5GHz Bridge Configuration

53 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 53 5GHz Bridge A2 for small area coverage & capacity enhancement A2: 450 m LOS A2: 450m LOS Access Bridge: a backhaul link at 5GHz signal (802.11a) Example Configurations: A2 setups 5GHz bridge with A2 5GHz MAC address Enable na HT40ext ch+1 Channel 36 Enable AES (Recommended bridge security) A2 setups 5GHz bridge with A2 5GHz MAC address Enable na HT40ext ch+1 Channel 36 Enable AES All configurations on both sides must be the same, except MAC address 2km

54 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 54 Wireless modes: a - Max 54Mbps na HT20 - Max 130Mbps na HT40ext ch+1 - Max 300Mbps na HT40ext ch-1 - Max 300Mbps A2: Configuration > 5G Radio 2. Click Update 3. Select Frequency 4. Type in Bridge Distance 5. A2 5GHz radio MAC address 6. Select AES 7. Type in Key 8. Click Update 1. Select 11na HT40ext ch + 1 Different channel sets

55 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 55 A8-A8 5GHz Bridge Configuration

56 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 56 Up to 1km LOS A8 for large outdoor coverage Access 56 5GHz Bridge Bridge: a backhaul link at 5GHz signal (802.11a Turbo Mode) Example Configurations: A8 setups 5GHz bridge with A8 5GHz MAC address Enable a Turbo Mode +Bursting Mode + Fast Mode Channel 56 Enable AES (Recommended bridge security) A8 setups 5GHz bridge with A2 5GHz MAC address Enable a Turbo Mode +Bursting Mode + Fast Mode Channel 56 Enable AES All configurations on both sides must be the same, except MAC address 2km Up to 1km LOS

57 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 57 A8: Configuration>5G Wireless Bridge>General 1. Select Turbo mode 2. Click Save 3. Select Frequency 4. Type in Bridge Distance 5. Enable Bursting and Fast Frame Click Save to batch the changes

58 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 58 A8: Configuration>5G Wireless Bridge>Remote Bridge 5. Type in A8 5GHz radio MAC address and click Add to List A8: Configuration>5G Wireless Bridge>Security 6. Select AES 7. Type in Key Click Save to batch the changes

59 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 59 C1 CPE Configuration

60 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 60 A8 Configurations: VAP1 SSID: A8_CPE Maximum Clients: 256 Wireless security: Open C1 Configurations: CPE Mode: also named station mode VAP 0 Connect to A8_CPE Wireless security: Open Configuration Case

61 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 61 A8 Configurations Set SSID Set VAP Security

62 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 62 C1 Configurations Configuration>2.4GHz Radio Enable Station Mode Click Edit to modify VAP config

63 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 63 C1 Configurations Configuration>2.4GHz Radio>VAP 0 Enable VAP0 Click Scan to scan available SSID Click Edit to set security config, the same with A8 Only connect to a particular AP with the specific MAC. Usefull when SSIDs are the same.

64 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 64 Choose one SSID C1 Configurations RSSI level Channel

65 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 65 A8:Status>2.4G Wireless AP>Association List C1 is connected to A8

66 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 66 A8-Ein/A8n Configurations

67 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 67 A8-Ein: Configuration>Network>General Recommend “Static IP” Static IP, subnet mask and default gateway configuration (Default IP address: ) Click Submit to batch the changes

68 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 68 A8-Ein: Tools>Channel Scan Click to start channel scan All the clients traffic would be interrupted during the channel scan test.

69 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 69 A8-Ein: Tools>Channel Scan Noise Floor Channel Scan Success

70 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 70 Configuration>Wireless> Radio0>General Wireless mode (802.11b, b/g, g, n, ng) Channel Selection

71 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 71 Configuration>Wireless> Radio0>Superwifi Sector State Range Optimization Auto, 0~800m, 200~1000m, 400~1200m

72 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 72 Configuration>Wireless> Radio0>WLAN Edit SSID

73 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 73 Configuration>Wireless> Radio0>WLAN>WLAN General Will not broadcast SSID Set SSID Enabled allows traffic to pass between stations in a VAP. For mgt VAP, recommended enable. For normal service VAP, disable. Default value: 512 Access Traffic Right: Full Access or Management Only/Disable

74 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 74 Configuration>Wireless> Radio0>WLAN>WLAN Security AuthenticationOpen Shared Key WPAWPA-PSKWPA2WPA2-PSKWAPIWAPI-PSK CipherDisable WEP AES/TKIPAESSMS4 Key4 KeysRADIUSPassphraseRADIUSPassphraseASPassphrase

75 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 75 Configuration>Wireless> Radio0>WLAN>QoS Enable DSCP to WMM Mapping Different Value is different priority level

76 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 76 Configuration>Wireless> Radio0>WLAN>Bandwidth Control Bandwidth Control for Total WLAN Bandwidth Control for Each Station

77 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 77 Save and Apply Click Submit to apply all changes Click Save & Apply or Unsaved

78 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 78 A8-Ein/A8n & A8-Ein/A8n 5GHz Bridge Configuration

79 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 79 Configuration>Wireless> Radio1>General Enable Radio Radio Mode as AP Wireless Mode and Channel Disable Inter-WLAN Forwarding

80 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 80 Configuration>Wireless> Radio1>WLAN Edit WLAN

81 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 81 WLAN General Configuration Enable WLAN Enable VLAN Pass Through SSID Name for the Bridge Hide SSID

82 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 82 WLAN Security Configuration Authentication Mode as WPA2-PSK Passphrase

83 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 83 Configuration>Wireless> Radio1>General (Remote) Enable Radio Radio Mode as Station Transmit Power

84 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 84 Configuration>Wireless> Radio1>WLAN (Remote) Edit

85 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 85 Configuration>Wireless> Radio1>WLAN>WLAN General (Remote) SSID and Target BSSID

86 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 86 Configuration>Wireless> Radio1>WLAN>WLAN Security (Remote) Authentication Mode and Pass Phrase

87 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 87 Connection status Connection Status SSID Name Status>Interface>Radio1>Association List

88 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 88 A8-Ein/A8n & A2 5GHz Bridge Configuration

89 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 89 When the A8-Ein and A2n make the Bridge, the A2n 5Ghz wireless should be as AP mode, and the A8- Ein 5Ghz wireless should be as Station mode, then it will pass through the VLAN. Notice A2n A8-Ein AP Mode Station Mode 5Ghz Wireless Bridge

90 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 90 Configuration>5G Radio Radio Operational as AP mode Wireless Mode Channel Selection Edit VAP

91 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 91 VAP Configuration State as Up SSID of VAP Hide SSID Disable Intra-VAP Forwarding Enable VLAN Trunk Port Edit Security Configuration

92 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 92 Security Configuration Authentication Mode as WPA2-PSK Passphrase

93 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 93 Configuration>Wireless >Radio>WLAN (Remote) Edit WLAN

94 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 94 5GHz Radio Configuration (Remote) Enable WLAN The SSID is 5GHz radio SSID from the master AP The BSSID is MAC address of the 5GHz radio from the master AP

95 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 95 WLAN Security Configuration (Remote) Authentication mode as WAP2-PSK, Passphrase should match with the master AP

96 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 96 Connection status RSSI Information

97 Altai Super WiFi Not for Distribution – Altai Confidential Altai Super WiFi 97 Thank You


Download ppt "Altai Super WiFi 1 Not for Distribution – Altai Confidential Altai Super WiFi Altai Certification Training Configuration Professional Services Altai Technologies."

Similar presentations


Ads by Google