Presentation is loading. Please wait.

Presentation is loading. Please wait.

PICK THE DESIRED CONFIGURATION & PRESS OK TO CONTINUE.

Similar presentations


Presentation on theme: "PICK THE DESIRED CONFIGURATION & PRESS OK TO CONTINUE."— Presentation transcript:

1

2 PICK THE DESIRED CONFIGURATION & PRESS OK TO CONTINUE

3 Dimension and weight choice (s)

4 UNITS CAN BE CHANGED ANYTIME CHOOSE DESIRED UNITS & PRESS OK

5 CHOOSE TRUCK & CAB TYPE THEN PRESS NEXT

6 OPTIONAL DATA DROP SCREEN CLICK ON THE OPTIONAL INFO TAB TO REVEAL THE NEXT SCREEN

7 INFORMATION (EXCEPT FOR THE DATE) ALWAYS COMES UP WITH LAST INFORMATION THAT WAS ENTERED – CHANGE ACCORDINGLY

8 FILL IN THE BOXES TO RELATE TO THE SKETCH WHEELBASE CAB TO AXLE BODY LENGTH TAB TO MOVE BOX TO BOX

9 FILL IN THE BOXES TO RELATE TO THE SKETCH WHEELBASE CAB TO AXLE BODY LENGTH INFO TO BE ENTERED BLUE IN ENTRY BOX RED ON SKETCH COINCIDE WITH EACH OTHER TAB TO MOVE BOX TO BOX

10 DATA NOT REQUIRED BUT IF USED GIVES YOU A BETTER PERSPECTIVE TO THE FINAL OUTCOME!

11 IF USING TO CALCULATE FOR WHEELBASE CLICK THE OPTIONAL INFO TAB

12 SINGLES OR DUALS ON DRIVE (S) WEIGHT OF DRIVE (S) C/W: -BOGIE /SUSPENSION INSERT -SUSPENSION -DRIVE AXLE (S) C/W FOUNDATION BRAKES, HUBS DRUMS, TIRES, DISCS ETC. COMMONLY USED FIQURES – # SINGLE 2500 POUNDS # TANDEM 5000 POUNDS # SINGLE 2180 POUNDS # TANDEM 4600 POUNDS

13 DESIGN GVWR DESIGN GAWR (S)

14 ENTER FRAME HEIGHT OF CHASSIS, GROUND TO TOP!

15 ENTER FRAME HEIGHT OF CHASSIS, GROUND TO TOP! CHASSIS C of G FROM GROUND OR CHASSIS DATUM HEIGHT!

16 ENTER FRAME HEIGHT OF CHASSIS, GROUND TO TOP! CHASSIS C of G FROM GROUND OR CHASSIS DATUM HEIGHT! LATERAL C of G OF CHASSIS OPTIONAL

17 ENTER FRAME HEIGHT OF CHASSIS, GROUND TO TOP! CHASSIS C of G FROM GROUND OR CHASSIS DATUM HEIGHT! LATERAL C of G OF CHASSIS OPTIONAL CLICK FINISH YOU NOW HAVE A COMPLETED CHASSIS

18 ALWAYS GOOD IDEA TO SAVE CHASSIS SEPERATELY FOR FUTURE USE

19 NOW A BODY AND ACCESSORIES CAN BE ADDED TO THE CHASSIS

20 CHOOSE FROM THE DATABASE YOU’VE CREATED

21 OR CREATE & ADD TO YOUR DATABASE USING OPTION #2

22 CHOOSE FROM THE DATABASE YOU’VE CREATED OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 PICK BODY TYPE

23 CHOOSE FROM THE DATABASE YOU’VE CREATED OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 PICK BODY TYPE

24 CHOOSE FROM THE DATABASE YOU’VE CREATED OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 PICK BODY TYPE CLICK ADD TO ADD IT TO THE VEHICLE YOUR CREATING

25 BODY NOW INSTALLED – WEIGHT NOW ADJUSTED ACCORDINGLY

26 ACCESSORIES CAN BE ADDED FROM YOUR DATABASE

27 ACCESSORIES CAN BE ADDED FROM YOUR DATABASE OR CREATE & ADD TO YOUR DATABASE USING OPTION #2

28 ACCESSORIES CAN BE ADDED FROM YOUR DATABASE OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 ACCESSORIES CAN BE “BUILT” USING SHAPES

29 ACCESSORIES CAN BE ADDED FROM YOUR DATABASE OR CREATE & ADD TO YOUR DATABASE USING OPTION #2 ACCESSORIES CAN BE “BUILT” USING SHAPES ACCESSORIES CAN ALSO BE POINT LOCATION

30 A1 TWO SEATING POSITIONS ACCESSORIES ARE ADDED TO YOUR VEHICLE BY CLICKING ACCESSORY, ADD, THEN SLIDING IT INTO POSITION

31 A2 FUEL A1 TWO SEATING POSITIONS ACCESSORIES ARE ADDED TO YOUR VEHICLE BY CLICKING ACCESSORY, ADD, THEN SLIDING IT INTO POSITION

32 A2 FUEL A1 TWO SEATING POSITIONS A3 TAILGATE LOADER ACCESSORIES ARE ADDED TO YOUR VEHICLE BY CLICKING ACCESSORY, ADD, THEN SLIDING IT INTO POSITION

33 LOADS ARE ADDED TO YOUR VEHICLE BY CLICKING LOAD, ADD, THEN SLIDING IT INTO POSITION

34 L1 PAYLOAD LOADS ARE ADDED TO YOUR VEHICLE BY CLICKING LOAD, ADD, THEN SLIDING IT INTO POSITION

35 A COMPLETED VEHICLE WITH ACCESSORIES AND LOAD

36 PRINTOUT SHOWING ALLOWABLE DESIGN PAYLOAD

37 PRINTOUT SHOWS WT. DISTRIBUTION & C of G CALCULATION

38 SHOWS COMPLEXITY OF WHAT CAN BE ACCOMPLISHED!! SIDE VIEW

39 TOP VIEW

40 UNLIMITED ENTRY SPACE FOR ACCESSORIES

41

42 CLICK AND DRAG FEATURE FOR SOLVING FOR WHEELBASE CLICK ONTO DRIVE AXLE, SLIDE TO SOLVE FOR WHEELBASE, WEIGHTS RE-CALCULATE AS YOU SLIDE. WHEELBASE DIMENSIONS TURNS BLUE WHEELBASE CAN SLIDE EITHER WAY


Download ppt "PICK THE DESIRED CONFIGURATION & PRESS OK TO CONTINUE."

Similar presentations


Ads by Google