Presentation is loading. Please wait.

Presentation is loading. Please wait.

CEN TC278 WG16 ISO TC204 WG16 Liaison report to ETSI TC ITS June 2013 April 2013PT1601 liaison report to ETSI TC ITS1.

Similar presentations


Presentation on theme: "CEN TC278 WG16 ISO TC204 WG16 Liaison report to ETSI TC ITS June 2013 April 2013PT1601 liaison report to ETSI TC ITS1."— Presentation transcript:

1 CEN TC278 WG16 ISO TC204 WG16 Liaison report to ETSI TC ITS June 2013 April 2013PT1601 liaison report to ETSI TC ITS1

2 Standards from CEN April 2013PT1601 liaison report to ETSI TC ITS2 TS " Co-operative systems — Roles and responsibilities in the context of co-operative ITS based on architecture(s) for co-operative systems" TS "Co-operative systems — Classification and management of ITS applications in a global context“ TS "Co-operative systems — ITS application requirements for selection of communication profiles" TS " Co-operative systems — Profiles for exchanges between ITS stations" and others related to applications and message sets.

3 Standards from ISO April 2013PT1601 liaison report to ETSI TC ITS3 ISO " Intelligent transport systems – Communications access for land mobiles (CALM) – Architecture“ ISO " Intelligent transport systems – Communications access for land mobiles (CALM) – Access technology support" ISO " Intelligent transport systems – Communications access for land mobiles (CALM) – ITS IPv6 Networking Security"

4 Standards from ISO April 2013PT1601 liaison report to ETSI TC ITS4 ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – ITS station management – Part 1: Local management" ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – ITS station management – Part 2: Remote management" ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – ITS station management – Part 3: Service access points" ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – ITS station management – Part 4: Station-internal management communication protocol (IICP)"

5 Standards from ISO April 2013PT1601 liaison report to ETSI TC ITS5 ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – IPv6 Networking" ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – IPv4- IPv6 interoperability" ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – ITS IPv6 Networking Optimization" ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – IPv6 multicast"

6 Standards from ISO April 2013PT1601 liaison report to ETSI TC ITS6 ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – ITS station management – Part 5: Fast service advertisement protocol (FSAP)" ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – ITS station management – Part 6: Flow and path management"

7 Standards from ISO April 2013PT1601 liaison report to ETSI TC ITS7 ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – Non- IP networking – Part 1: Fast networking & transport layer protocol (FNTP)" ISO "Intelligent transport systems – Communications access for land mobiles (CALM) – Non- IP networking – Part 2: Legacy system support" and many others on various access technologies

8 PT1601 April 2013PT1601 liaison report to ETSI TC ITS8 PT1601 is a project team at CEN TC278 WG16 funded by the European Commission under mandate M/453. See Contact us:

9 ITS-S architecture (ISO 21217) April 2013PT1601 liaison report to ETSI TC ITS9 The ITS-S is defined as a B ounded S ecured M anaged D omain. There are many other stations used in ITS already today, which are not following the principles of BSMD. Nevertheless communications between ITS-SUs = BSME and other ITS station units has to be possible.

10 TS Scope April 2013PT1601 liaison report to ETSI TC ITS10 This Technical Specification specifies requirements and objectives for communications presented by ITS-S application process to the ITS-S management in support of automatic selection of ITS-S communication profiles in an ITS station unit (ITS-SU) specified in ISO 21217, specifies related optional procedures for the static and dynamic ITS-S communication profile selection processes at a high functional level.

11 Simplified architecture (TS 17423) April 2013PT1601 liaison report to ETSI TC ITS11 All entities (applications) using communications services from "Simplified communications" are referred to as "ITS-S application processes": (ISO 21217) ITS-S applications (ISO 21217) ITS-S facility applications (ISO 21217) CAM generator (ETSI TC IST WG1) ITS-S management applications (ISO 21217) IICP (ISO ) FSAP (ISO ) Remote management (ISO ) ITS-S security applications (ISO 21217) Other applications

12 Classification April 2013PT1601 liaison report to ETSI TC ITS12 ITS-S application processes: certified for BSMD and identified by an ITS-AID ITS-S application, ITS-S facilities application, ITS-S management application, ITS-S security application authorized (=mandatory or conditional) permitted (=optional ) not certified for BSMD and without ITS-AID Other application A single ITS application certified for BSMD and identified by a value of ITS-AID might result in N ITS-S application processes of which each may be implemented by M software developers. Each implementation of each such ITS-S application process refers to the same ITS-AID, but gets its own certificate!

13 Comm. profile selection (TS 17423) April 2013PT1601 liaison report to ETSI TC ITS13 ITS-S application processes reside in the ITS-S applications entity, the ITS-S management entity, the IST-S facilities layer and the ITS-S management entity.

14 Other applications April 2013PT1601 liaison report to ETSI TC ITS14 A gateway functionality allows other applications to have restricted access to the ITS-S services of an ITS-SU.

15 Comm. requirements (TS 17423) April 2013PT1601 liaison report to ETSI TC ITS15

16 Comm. requirements (TS 17423) April 2013PT1601 liaison report to ETSI TC ITS16

17 Comm. requirements (TS 17423) April 2013PT1601 liaison report to ETSI TC ITS17

18 Comm. requirements (TS 17423) April 2013PT1601 liaison report to ETSI TC ITS18

19 Comm. requirements (TS 17423) April 2013PT1601 liaison report to ETSI TC ITS19 The following procedures related to data elements identified in this Technical Specification for the purpose of mapping applications to ITS-S communication profiles are identified: Presentation of requirements and objectives by ITS-S application processes. Monitoring of capabilities of communications. Monitoring of change in regulations and policies. Selection of ITS-S communication profiles. Provision of additional rules and policies by user of ITS- SUs. ITS-S communication profile assignment for applications which are not certified to be installed in an ITS-SU.

20 TS Scope April 2013PT1601 liaison report to ETSI TC ITS20 This Technical Specification illustrates and specifies "Global Classification and Management of ITS Applications" (GCMA). It describes and specifies globally unique addresses and identifiers (ITS- S object identifiers) which are both internal and external to ITS stations and are used for ITS station management, describes how ITS-S object identifiers and related technical parameters are used for classification, registration and management of ITS applications and ITS application classes, describes how ITS-S object identifiers are used in the ITS communication protocol stack, introduces an organizational framework for registration and management of ITS-S objects, defines and specifies management procedures, focuses on international applicability, is based on the ITS communication architecture described in ISO

21 Entities and their roles (TS 17419) April 2013PT1601 liaison report to ETSI TC ITS21 ITS-S object Entity used in ITS related to ITS-S management that may require a globally unique identifier. Examples are ITS application objects, ITS message sets, ITS-S communication protocols, ITS-S units, ITS-S communication units. ITS-S object owner Entity which is responsible for the specification (design), maintenance and registration of ITS-S objects, often a standards development organization or an industry special interest group such as the "Society of Automotive Engineers" (SAE). Examples are ITS application object owners, ITS message sets owners, ITS-S communication protocol owners.

22 Entities and their roles (TS 17419) April 2013PT1601 liaison report to ETSI TC ITS22 ITS application object Entity that provides an ITS service to the user as specified in ISO Examples are ITS applications and ITS application classes. ITS message set Set of ITS messages designed for an ITS-related purpose as specified in ISO ITS-S communication protocol Protocol used in a communication protocol stack of an ITS-S

23 Entities and their roles (TS 17419) April 2013PT1601 liaison report to ETSI TC ITS23 ITS-S unit (ITS-SU) Physical instantiation of an ITS station specified in ISO An ITS-SU may consist of one single ITS-SCU, or several ITS-SCUs interconnected via an ITS station internal network. An ITS-SU is also referred to as "Bounded Secured Managed Entity" as specified in ISO ITS-S communication unit (ITS-SCU) Physical instantiation of a part of an ITS-SU as specified in ISO

24 Entities and their roles (TS 17419) April 2013PT1601 liaison report to ETSI TC ITS24 ITS equipment manufacturer Manufacturer of ITS-SUs and ITS-SCUs. ITS-S application process developer Developer (manufacturer) of ITS-S application processes for usage in ITS- SUs.

25 Identifiers and addresses (TS 17419) April 2013PT1601 liaison report to ETSI TC ITS25 ITS-AID An ITS application identifier is used to uniquely identify an ITS application or an ITS application class. It is used to advertise services, and for secure installation and real-time operation of ITS-S application processes in an ITS-SU. All ITS-S applications shall have an ITS-AID assigned to them prior to installation in an ITS-SU. ITS-AOOID An ITS application object owner identifier is used to uniquely identify an owner of specifications of ITS application objects. ITS-EMID An ITS equipment manufacturer identifier is used to uniquely identify a manufacturer of ITS equipment.

26 Identifiers and addresses (TS 17419) April 2013PT1601 liaison report to ETSI TC ITS26 ITS-FlowTypeID An ITS-FlowTypeID is used to uniquely identify an ITS flow type. It is used in the communication profile selection process specified in CEN/ISO TS An ITS flow type is a set of communication requirements and objectives specified in CEN/ISO TS and used by the ITS-S management to select an optimum ITS-S communication profile. An ITS flow type may be identified by a globally unique well-known ITS flow type identifier (ITS- FlowTypeID). ITS-LCHID An ITS logical channel identifier is used to uniquely identify an ITS logical channel in the ITS-S communication profile selection process specified in CEN/ISO TS

27 Identifiers and addresses (TS 17419) April 2013PT1601 liaison report to ETSI TC ITS27 ITS-MsgSetID An ITS message set identifier is used to uniquely identify an ITS message set. ITS-S applications may construct PDUs using messages from any registered ITS message set, and may also consume such messages through publish/subscribe mechanisms in ITS-SUs. ITS-MSOID An ITS message set owner identifier is used to uniquely identify an owner of specifications of ITS message sets.

28 Identifiers and addresses (TS 17419) April 2013PT1601 liaison report to ETSI TC ITS28 ITS-PN An ITS port number is used in an ITS-SCU to uniquely identify for a given transport protocol, e.g. FNTP, an entity or protocol in the ITS-S facilities layer. Globally unique, registered well-known port numbers and local dynamically assigned port numbers are used. ITS-PRID An ITS policy region identifier is used to uniquely identify an ITS policy region (ITS-PR) in the ITS-S communication profile selection process specified in CEN/ISO TS Different types of policy regions may be distinguished.

29 ITS-AID registry (TS 17419) functional description April 2013PT1601 liaison report to ETSI TC ITS29 ITS-AID: ITS application ID  registry ITS-AOOID: ITS Application Object Owner ID (designer)  registry

30 ITS-MsgSet-ID registry (TS 17419) functional description April 2013PT1601 liaison report to ETSI TC ITS30 ITS-MsgSet-ID: ITS message set ID  registry ITS-MSOID: ITS Message Set Owner ID (designer)  registry

31 ITS-SCU registry (TS 17419) functional description April 2013PT1601 liaison report to ETSI TC ITS31 ITS-EMID: ITS equipment manufacturer ID  registry ITS-SCUID: Serial number of ITS-SCU  registry

32 ITS-S application process (TS 17419) functional description April 2013PT1601 liaison report to ETSI TC ITS32 ITS-APDID: ITS application process developer ID  registry

33 ITS-SCU credentials (TS 17419) functional description April 2013PT1601 liaison report to ETSI TC ITS33

34 Communications (TS 17419) functional description April 2013PT1601 liaison report to ETSI TC ITS34

35 ITS-S application process provisioner (TS 17419) functional description April 2013PT1601 liaison report to ETSI TC ITS35

36 ESF GmbH Hans-Joachim Fischer Fichtenweg 9 D Blaubeuren Germany phone: fax: LECIT Consulting SrL Fausto Caneschi Via Santa Maria Pisa Italy phone: SRA, Inc. Richard Roy 3351 Shady Spring Ln Mountain View, CA USA phone: Members of PT1601 April 2013PT1601 liaison report to ETSI TC ITS36


Download ppt "CEN TC278 WG16 ISO TC204 WG16 Liaison report to ETSI TC ITS June 2013 April 2013PT1601 liaison report to ETSI TC ITS1."

Similar presentations


Ads by Google