Presentation is loading. Please wait.

Presentation is loading. Please wait.

Sales Presentation November 2010

Similar presentations

Presentation on theme: "Sales Presentation November 2010"— Presentation transcript:

1 Sales Presentation November 2010
3M™ Ultra Hard Metric (UHM) Cable Assemblies “Enabling performance of next generation 2 mm Hard Metric systems” This is the introduction slide for UHM connector and THE key message we want to make with the potential customer at the beginning and end of this presentation is that the UHM connector system enables the performance of next generation 2mm Hard Metric systems. Start by introducing 3M’s new Ultra Hard Metric Connector, as the industry’s first fully-shielded, lowest crosstalk 2mm Hard Metric connector. And will want to state that our key objective today is to DEMONSTRATE how 3M’s new Ultra Hard Metric Connector can improve and enable the performance of 2mm Hard Metric Backplane designs. Sales Presentation November 2010 © 3M All Rights Reserved.

2 2 mm Hard Metric Connector - Backplane Workhorse for 10+ yrs….
2 mm Hard Metric Connectors Industry’s most successful backplane connector system with a 10+ year history Adopted by many backplane standards CompactPCI® VME 64x PXI Right Angle Female Receptacle ( Socket ) Vertical Male Pin Header Widely available globally from many connector manufacturers Key drivers of success High Density 2 mm x 2 mm pitch Available in various form factors (A,B,C,AB,D,E,F,DE) Competitive pricing - inexpensive Typical Applications – Embedded Computers, Telecom, Medical, Military, Test & Measurement Systems As most of you are already know, 2mm Hard Metric Connectors have been an industry work horse for many years. This is evidenced by their adoption into many popular backplane standards such as cPCI, VME 64x and PXI for example. The reasons why they have been so successful is that 2mm connector system obviously increases signal density over .100” systems, is available in various modular form factors and is a cost effective connector system. It is ALSO important to note that these same reasons for success are STILL true even today so we expect 2mm HM systems to be widely used for many years. 2 mm Hard Metric Connector - Backplane Workhorse for 10+ yrs…. © 3M All Rights Reserved. © 3M All Rights Reserved. 2

3 However...Today’s Applications are more demanding
FROM TO Legacy Bus Backplane 32/64 bit PCI Bus 10/100M Ethernet VME Bus High Speed Serial Backplane PCI Express (5 Gbps) GigE /10G (1.25/10 Gbps) XAUI (3.125 Gbps) Rapid IO (2.5 G/s) Infiniband (2/4/8 Gbps) Legacy Parallel IO SCSI 10/100M Ethernet RS 232 PCI/VME Bus High Speed Serial IO SAS/SATA (3/6 Gb/s) Gig E (1.25 G/s) USB 3.0 (5 Gb/s) Infiniband (2/4/8 Gb/s) LVDS (1.5 Gb/s) In addition however, I am sure you are also aware that there has been rapid changes in digital signal transmission trends impacting these backplane systems. As shown here going from low speed parallel bus applications to high density - high speed serial point-to-point differential signal transmission as adopted by signaling protocols such as SATA/SAS , PCI Express, Gigabit Ethernet, USB, etc and as a result Today’s Systems require very high densities of multi-Gb/s diff. signals Space and Power constraints driving need for high density in addition to high speed Today’s systems require very high densities of multi-Gbps diff. signals © 3M All Rights Reserved. © 3M All Rights Reserved. 3

4 3M™ Ultra Hard Metric (UHM) Connector Product Availability and Roadmap
2009 (Available Now) 2010 2011 7+ Gbps UHM sockets mated with std. 2 mm HM header NEW 12 Gbps UHM Cable Assemblies 10 GBASE-KR UHM System UHM sockets 5 Row and 8 Row Types A, B, C, D, E, F, AB, DE UHM B22 Socket specified in next generation PICMG 2.30 Compact PCI draft Standard So here we show what we are able to offer today to improve the performance of your 2mm HM backplane systems. TODAY 3M is able to offer a fully shielded Ultra Hard Metric Socket that when mated to a standard 2mm Hard Metric Header is able to transmit 7+ Gbps. This UHM right angle socket comes in 5 and 8 rows with the various format types established by 2mm HM standard. ( i.e., Type A, B, C...for example ). In particular though we want to especially highlight the B22 connector which is the J2 connector specified in the PICMG 2.30 Compact PCI DRAFT standard. As you can see here we currently working on a UHM HEADER in order to improve speeds with a target of Gbps. Ruggedized individual wafer construction Exceeds 10GBase-KR specification with safety margin UHM Cable Assemblies 2mm Cable Assemblies to connect backplanes or Rear IO - 5 Row 12 Gbps performance © 3M All Rights Reserved. © 3M All Rights Reserved. 4

5 UHM Cable Assembly Wafer with 2mm SCI differential cables mated to cPCI Hard Metric Header © 3M All Rights Reserved.

6 3M™ UHM Cable Assembly: Single 5 row wafer
High Performance Twinaxial / Differential Cable Assemblies NEW Modular 2mm 3M™ SCI 5x1 wafer Two differential or single ended channels per wafer Mates to 2mm HM / cPCI headers or 3M™ HSHM backplane Headers “Snap” together modular design up to 25 wafers differential or coaxial channels Full 360 shielding box for each channel to minimize crosstalk 1 common ground per wafer in row “C” © 3M All Rights Reserved.

7 Hard Metric carrier up to 25 positions
UHM Cable Assembly Hard Metric carrier up to 25 positions © 3M All Rights Reserved.

8 UHM to 3M High Speed options
UHM to Latch Eject Carrier © 3M All Rights Reserved.

9 Performance Superiority
Plugs into existing cPCI Hard Metric Headers 12 Gbps Electrical Performance is superior to legacy products Helps transition of legacy Rear IO to support next generation high speed protocols such as PCI Express, Gigabit Ethernet and 6G/12G SAS Design allows flexibility of grounding – unique to 3M solution. Design allows mix and match of power and signal Custom options: fast and flexible modifications if needed for wafers. Coaxial or Twin-axial cables © 3M All Rights Reserved.

10 PICMG 2.30 cPCI Plus I/O ( adds serial pinout )
Need: A J2 connector to support a high density PICMG 2.30 standard pinout of high speed differential signals - PCI Express, SATA, Gig Ethernet, USB 2.0 on selected system and peripheral cards of CompactPCI® embedded computers while continuing to leverage existing PCI bus cards – “hybrid backplane” Solution: Use 3M™ Ultra Hard Metric (UHM) Connector B22 to enable Multi-Gigabit Serial data links through J2 connector on the daughter cards that require high speed signals. Cable I/O options ( not part of standard ) rJ2 Type B 1-22pos J2 P2 Type AB 1-22pos P1 Type A 1-25pos J1 3U Front Plug-in board 3U Rear Plug-in board © 3M All Rights Reserved. 10

11 CompactPCI® 6U Applications ( user defined pinout )
Need: A connector to Increase functionality and throughput through J2, J3, J4, J5 (6U) connector of CompactPCI embedded computers for a user defined application specific pinout Solution: Use appropriate 3M™ Ultra Hard Metric (UHM) Connector enabled Multi-Gigabit Serial data links through J2/J3/J4/J5 connector 6U Front Plug-in board 6U Rear Plug-in board rP5 rP4 rP3 P1 P2 P3 P4 P5 J5 J4 Type B22 Type A25 J2 J1 J3 Type B19 Type AB 22pos This is an example of a how one can use a user defined backplane system based on CompactPCI backplane standard 3U or 6U systems by using the J2, J3, J4 or J5 connectors by creating a pinout which will support multiple high speed serial protocols ( see list in slide ). A solution would be to use the appropriate 3M UHM connector as all of the 5 row formats will be made available. rJ5 Type A 25pos rJ4 Cable I/O rJ3 Type AB 19pos 11 © 3M All Rights Reserved. © 3M All Rights Reserved. 11

12 Eye Pattern Test Setup for UHM cable assembly
© 3M All Rights Reserved.

13 UHM Assembly ( row C common ground option ) mated into cPCI Header
© 3M All Rights Reserved.

14 12 Gbps Eye Pattern UHM Twinax Cable Assy mated to cPCI headers
Eye 12 Gbps 0.5 m double ended UHM Cable Assembly mated to two 2 mm HM Headers (after eliminating PCB and via effects) © 3M All Rights Reserved.

15 Part Numbering Information
Part Description Part Number Tech Sheet 2 mm, A Type: 110 Signal Contacts, 5 Rows XXX.X-C (Need 2 assemblies per A style header) TS2364 2 mm, B Type: 95 Signal Contacts, 5 Rows, XXX.X-C 2 mm, B Type: 110 Signal Contacts, 5 Rows XXX.X-C 2 mm, B Type: 125 Signal Contacts, 5 Rows XXX.X-C 2 mm, C Type: 55 Signal Contacts, 5 Rows XXX.X = Length of Assembly from tip to tip in inches Coax Cable Type: 027 = 50 Ω Cable, 26 AWG 105 = 50 Ω Cable, 28 AWG 054 = 75 Ω Cable, 30 AWG Twinax Cable Type 058 = 100 Ω Twinax, 26 AWG 122 = 85 Ω Twinax, 25 AWG © 3M All Rights Reserved.

16 More Information Information and specs online at © 3M All Rights Reserved. © 3M All Rights Reserved. 16

17 Important Notice 3M and MetPak are trademarks of 3M Company.
AdvancedTCA, ATCA and CompactPCI is a trademark of PICMG-PCI Industrial Computer Manufacturers Group, Inc. VXS is a trademark of VITA-VMEbus International Trade Association Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability 3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. © 3M All Rights Reserved. © 3M All Rights Reserved. 17

Download ppt "Sales Presentation November 2010"

Similar presentations

Ads by Google