Presentation is loading. Please wait.

Presentation is loading. Please wait.

Threaded Inserts (TH series) Can change through hole to threaded hole !! TH Series Change to through hole TH Series Change to through hole THB Series Change.

Similar presentations


Presentation on theme: "Threaded Inserts (TH series) Can change through hole to threaded hole !! TH Series Change to through hole TH Series Change to through hole THB Series Change."— Presentation transcript:

1 Threaded Inserts (TH series) Can change through hole to threaded hole !! TH Series Change to through hole TH Series Change to through hole THB Series Change to non threaded inserts THC Series Change to non threaded inserts Structure Cream Solder TH Series PCB Copper Foil SHINDENKIZAI sdk@mac8sdk.co.jp TH Series Mounting Process 1.On PCB land, apply Cream solder. By Mounter, put the parts 2.Reflow3.Remove adsorption caps

2 Threaded Inserts TH series Through hole is changed to threaded hole(M1.0,M1.2,M1.4,M1.7,M2, M2.6, M3). Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. ■Material: Brass ■Finish: Sn plating over Ni ■Recommended PCB Thickness:1.6t for TH-1.6 Series, 0.8t for TH-0.8 Series ■Recommended Metal Mask Thickness:150-200μ TH-0.8-M1.010A TH-0.8-M1.212A TH-0.8-M1.412A TH-1.6-M1.615A TH-1.6-M1.715A TH-1.6-M220A TH-1.6-M2.620A TH-1.6-M330A ■Current Capacity ■ Tightening Torque TH-0.8-M1.00.3kgf-cm(2.94N-cm)and below TH-0.8-M1.20.6kgf-cm(5.88N-cm)and below TH-0.8-M1.41.0kgf-cm(9.8N-cm)and below TH-1.6-M1.61.5kgf-cm(14.7N-cm)and below TH-1.6-M1.71.5kgf-cm(14.7N-cm)and below TH-1.6-M21.5kgf-cm(14.7N-cm)and below TH-1.6-M2.63kgf-cm(29.4N-cm)and below TH-1.6-M3 X-dire 5kgf-cm(49N-cm)and below Y-dire 3kgf-cm(29.4N-cm)and below P/NABCDMPackage TH-0.8-M1.02.51.60.70.5M1.0P=0.251000/reel TH-0.8-M1.22.51.80.70.5M1.2P=0.251000/reel TH-0.8-M1.42.72.00.7 M1.4P=0.31000/reel TH-1.6-M1.63.02.21.50.3M1.6P=0.35900/reel TH-1.6-M1.73.02.31.50.3M1.7P=0.35900/reel TH-1.6-M24.02.51.50.3M2P=0.4900/reel TH-1.6-M2.64.53.11.50.3M2.6P=0.45900/reel TH-1.6-M35.03.51.50.3M3P=0.5900/reel *we can provide the bulk type *Mounter should have automatic recognition system SHINDENKIZAI sdk@mac8sdk.co.jp

3 Threaded Inserts TH-0.8 series ■Current Capacity ■ Tightening Torque ■Stand-off type threaded inserts. This is mounted on PCB by inserting into through-hole. ■Screws can be inserted from both component and solder side. ■Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. ■Mounter should have automatic recognition system. ■Bulk type (100pcs/pack) is available. ■Recommended PCB Thickness: 0.8-1.5t TH-0.8-□- M2 20A TH-0.8-□- M2.6 20A TH-0.8-□- M3 30A TH-0.8-□-M21.5kgf-cm (14.7N-cm) and below TH-0.8-□-M2.63kgf-cm (29.4N-cm) and below TH-0.8-□-M3 X dire 5kgf-cm (49N-cm) and below Y dire 3kgf-cm (29.4N-cm) and below P/NABHMPackage TH-0.8-1.0-M24.02.51.0M2450/reel TH-0.8-1.5-M24.02.51.5M2450/reel TH-0.8-2.0-M24.02.52.0M2450/reel TH-0.8-2.5-M24.02.5 M2350/reel TH-0.8-3.0-M24.02.53.0M2350/reel TH-0.8-3.5-M24.02.53.5M2350/reel TH-0.8-4.0-M24.02.54.0M2250/reel TH-0.8-4.5-M24.02.54.5M2250/reel TH-0.8-5.0-M24.02.55.0M2250/reel TH-0.8-1.0-M2.64.53.11.0M2.6450/reel TH-0.8-1.5-M2.64.53.11.5M2.6450/reel TH-0.8-2.0-M2.64.53.12.0M2.6450/reel TH-0.8-2.5-M2.64.53.12.5M2.6350/reel TH-0.8-3.0-M2.64.53.13.0M2.6350/reel TH-0.8-3.5-M2.64.53.13.5M2.6350/reel TH-0.8-4.0-M2.64.53.14.0M2.6250/reel TH-0.8-4.5-M2.64.53.14.5M2.6250/reel TH-0.8-5.0-M2.64.53.15.0M2.6250/reel TH-0.8-5.5-M2.64.53.15.5M2.6350/reel TH-0.8-6.0-M2.64.53.16.0M2.6350/reel TH-0.8-6.5-M2.64.53.16.5M2.6300/reel TH-0.8-7.0-M2.64.53.17.0M2.6300/reel TH-0.8-7.5-M2.64.53.17.5M2.6300/reel TH-0.8-8.0-M2.64.53.18.0M2.6300/reel P/NABHM Packag e TH-0.8-1.2-M35.03.51.2M3 450/re el TH-0.8-1.5-M35.03.51.5M3 450/re el TH-0.8-2.0-M35.03.52.0M3 450/re el TH-0.8-2.5-M35.03.52.5M3 350/re el TH-0.8-3.0-M35.03.53.0M3 350/re el TH-0.8-3.5-M35.03.5 M3 350/re el TH-0.8-4.0-M35.03.54.0M3 250/re el TH-0.8-4.5-M35.03.54.5M3 250/re el TH-0.8-5.0-M35.03.55.0M3 250/re el TH-0.8-5.5-M35.03.55.5M3 350/re el TH-0.8-6.0-M35.03.56.0M3 350/re el TH-0.8-6.5-M35.03.56.5M3 300/re el TH-0.8-7.0-M35.03.57.0M3 300/re el TH-0.8-7.5-M35.03.57.5M3 300/re el TH-0.8-8.0-M35.03.58.0M3 300/re el TH-0.8-8.5-M35.03.58.5M3 250/re el TH-0.8-9.0-M35.03.59.0M3 250/re el TH-0.8-9.5-M35.03.59.5M3 250/re el TH-0.8-10-M35.03.510M3 250/re el SHINDENKIZAI sdk@mac8sdk.co.jp

4 Threaded Inserts TH-1.6 series ■Current Capacity ■ Tightening Torque ■Stand-off type threaded inserts. This is mounted on PCB by inserting into through-hole. ■Screws can be inserted from both component and solder side. ■Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. ■Mounter should have automatic recognition system. ■Bulk type (100pcs/pack) is available. ■Recommended PCB Thickness: 1.6t and above TH-1.6-□- M2 20A TH-1.6-□- M2.6 20A TH-1.6-□- M3 30A TH-1.6-□-M21.5kgf-cm (14.7N-cm) and below TH-1.6-□-M2.63kgf-cm (29.4N-cm) and below TH-1.6-□-M3 X dire 5kgf-cm (49N-cm) and below Y dire 3kgf-cm (29.4N-cm) and below P/NABHMPackage TH-1.6-0.5-M24.02.50.5M2450/reel TH-1.6-1.0-M24.02.51.0M2450/reel TH-1.6-1.5-M24.02.51.5M2450/reel TH-1.6-2.0-M24.02.52.0M2450/reel TH-1.6-2.5-M24.02.5 M2350/reel TH-1.6-3.0-M24.02.53.0M2350/reel TH-1.6-3.5-M24.02.53.5M2350/reel TH-1.6-4.0-M24.02.54.0M2250/reel TH-1.6-4.5-M24.02.54.5M2250/reel TH-1.6-5.0-M24.02.55.0M2250/reel TH-1.6-0.5-M2.64.53.10.5M2.6450/reel TH-1.6-1.0-M2.64.53.11.0M2.6450/reel TH-1.6-1.5-M2.64.53.11.5M2.6450/reel TH-1.6-2.0-M2.64.53.12.0M2.6450/reel TH-1.6-2.5-M2.64.53.12.5M2.6350/reel TH-1.6-3.0-M2.64.53.13.0M2.6350/reel TH-1.6-3.5-M2.64.53.13.5M2.6350/reel TH-1.6-4.0-M2.64.53.14.0M2.6250/reel TH-1.6-4.5-M2.64.53.14.5M2.6250/reel TH-1.6-5.0-M2.64.53.15.0M2.6250/reel TH-1.6-5.5-M2.64.53.15.5M2.6350/reel TH-1.6-6.0-M2.64.53.16.0M2.6350/reel TH-1.6-6.5-M2.64.53.16.5M2.6300/reel TH-1.6-7.0-M2.64.53.17.0M2.6300/reel TH-1.6-7.5-M2.64.53.17.5M2.6300/reel TH-1.6-8.0-M2.64.53.18.0M2.6300/reel P/NABHM Packag e TH-1.6-0.5-M35.03.50.5M3 450/re el TH-1.6-1.0-M35.03.51.0M3 450/re el TH-1.6-1.5-M35.03.51.5M3 450/re el TH-1.6-2.0-M35.03.52.0M3 450/re el TH-1.6-2.5-M35.03.52.5M3 350/re el TH-1.6-3.0-M35.03.53.0M3 350/re el TH-1.6-3.5-M35.03.5 M3 350/re el TH-1.6-4.0-M35.03.54.0M3 250/re el TH-1.6-4.5-M35.03.54.5M3 250/re el TH-1.6-5.0-M35.03.55.0M3 250/re el TH-1.6-5.5-M35.03.55.5M3 350/re el TH-1.6-6.0-M35.03.56.0M3 350/re el TH-1.6-6.5-M35.03.56.5M3 300/re el TH-1.6-7.0-M35.03.57.0M3 300/re el TH-1.6-7.5-M35.03.57.5M3 300/re el TH-1.6-8.0-M35.03.58.0M3 300/re el TH-1.6-8.5-M35.03.58.5M3 250/re el TH-1.6-9.0-M35.03.59.0M3 250/re el TH-1.6-9.5-M35.03.59.5M3 250/re el TH-1.6-10-M35.03.510M3 250/re el SHINDENKIZAI sdk@mac8sdk.co.jp

5 Threaded Inserts THB series Non-threaded type inserts for PCB through-hole. PCB is mounted above the chassis by inserting screws from the component side of PCB to tapped holes on the chassis. Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. Bulk type (100pcs/pack) is available. Bulk type does not have adsorption cap. ■Material: Brass ■Finish: Sn plating over Ni ■Recommended PCB Thickness: 1.6t SHINDENKIZAI sdk@mac8sdk.co.jp P/NABCLHPackage THB-1.5-24.53.02.11.50.0400/reel THB-2.1-24.53.02.1 0.5400/reel THB-2.6-24.53.02.12.61.0400/reel THB-3.1-24.53.02.13.11.5400/reel THB-3.6-24.53.02.13.62.0400/reel THB-4.1-24.53.02.14.12.5400/reel THB-4.6-24.53.02.14.63.0200/reel THB-5.1-24.53.02.15.13.5200/reel THB-5.6-24.53.02.15.64.0200/reel THB-6.1-24.53.02.16.14.5200/reel THB-6.6-24.53.02.16.65.0200/reel THB-1.5- 2.6 5.03.62.71.50.0400/reel THB-2.1- 2.6 5.03.62.72.10.5400/reel THB-2.6- 2.6 5.03.62.72.61.0400/reel THB-3.1- 2.6 5.03.62.73.11.5400/reel THB-3.6- 2.6 5.03.62.73.62.0400/reel THB-4.1- 2.6 5.03.62.74.12.5400/reel THB-4.6- 2.6 5.03.62.74.63.0200/reel THB-5.1- 2.6 5.03.62.75.13.5200/reel THB-5.6- 2.6 5.03.62.75.64.0200/reel THB-6.1- 2.6 5.03.62.76.14.5200/reel THB-6.6- 2.6 5.03.62.76.65.0200/reel THB-1.5-35.54.03.11.50.0400/reel THB-2.1-35.54.03.12.10.5400/reel THB-2.6-35.54.03.12.61.0400/reel THB-3.1-35.54.03.1 1.5400/reel THB-3.6-35.54.03.13.62.0400/reel THB-4.1-35.54.03.14.12.5400/reel THB-4.6-35.54.03.14.63.0200/reel THB-5.1-35.54.03.15.13.5200/reel THB-5.6-35.54.03.15.64.0200/reel THB-6.1-35.54.03.16.14.5200/reel THB-6.6-35.54.03.16.65.0200/reel

6 Threaded Inserts THC1.6 series ■Stand-off type non-threaded inserts. This is mounted on PCB by inserting into through-hole. ■Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. ■Mounter should have automatic recognition system. ■Bulk type (100pcs/pack) is available. ■Bulk type does not have adsorption cap. ■Material: Brass ■Finish: Sn plating over Ni ■Recommended PCB Thickness: 1.6t and above P/NABCH Pack age THC-1.6-0.5-24.53.02.10.5450 THC-1.6-1.0-24.53.02.11.0450 THC-1.6-1.5-24.53.02.11.5300 THC-1.6-2.0-24.53.02.12.0300 THC-1.6-2.5-24.53.02.12.5250 THC-1.6-3.0-24.53.02.13.0250 THC-1.6-3.5-24.53.02.13.5200 THC-1.6-4.0-24.53.02.14.0200 THC-1.6-4.5-24.53.02.14.5400 THC-1.6-5.0-24.53.02.15.0400 THC-1.6-5.5-24.53.02.15.5350 THC-1.6-6.0-24.53.02.16.0350 THC-1.6-6.5-24.53.02.16.5300 THC-1.6-7.0-24.53.02.17.0300 THC-1.6-7.5-24.53.02.17.5300 THC-1.6-8.0-24.53.02.18.0300 THC-1.6-0.5-2.65.03.62.70.5450 THC-1.6-1.0-2.65.03.62.71.0450 THC-1.6-1.5-2.65.03.62.71.5300 THC-1.6-2.0-2.65.03.62.72.0300 THC-1.6-2.5-2.65.03.62.72.5250 THC-1.6-3.0-2.65.03.62.73.0250 THC-1.6-3.5-2.65.03.62.73.5200 THC-1.6-4.0-2.65.03.62.74.0200 THC-1.6-4.5-2.65.03.62.74.5400 THC-1.6-5.0-2.65.03.62.75.0400 THC-1.6-5.5-2.65.03.62.75.5350 THC-1.6-6.0-2.65.03.62.76.0350 THC-1.6-6.5-2.65.03.62.76.5300 THC-1.6-7.0-2.65.03.62.77.0300 THC-1.6-7.5-2.65.03.62.77.5300 THC-1.6-8.0-2.65.03.62.78.0300 THC-1.6-8.5-2.65.03.62.78.5250 THC-1.6-9.0-2.65.03.62.79.0250 THC-1.6-9.5-2.65.03.62.79.5250 THC-1.6-10-2.65.03.62.710.0250 P/NABCH Pack age THC-1.6-0.5-35.54.03.10.5450 THC-1.6-1.0-35.54.03.11.0450 THC-1.6-1.5-35.54.03.11.5300 THC-1.6-2.0-35.54.03.12.0300 THC-1.6-2.5-35.54.03.12.5250 THC-1.6-3.0-35.54.03.13.0250 THC-1.6-3.5-35.54.03.13.5200 THC-1.6-4.0-35.54.03.14.0200 THC-1.6-4.5-35.54.03.14.5400 THC-1.6-5.0-35.54.03.15.0400 THC-1.6-5.5-35.54.03.15.5350 THC-1.6-6.0-35.54.03.16.0350 THC-1.6-6.5-35.54.03.16.5300 THC-1.6-7.0-35.54.03.17.0300 THC-1.6-7.5-35.54.03.17.5300 THC-1.6-8.0-35.54.03.18.0300 THC-1.6-8.5-35.54.03.18.5250 THC-1.6-9.0-35.54.03.19.0250 THC-1.6-9.5-35.54.03.19.5250 THC-1.6-10-35.54.03.110.0250 *You can order THC-0.8 Series SHINDENKIZAI sdk@mac8sdk.co.jp


Download ppt "Threaded Inserts (TH series) Can change through hole to threaded hole !! TH Series Change to through hole TH Series Change to through hole THB Series Change."

Similar presentations


Ads by Google