Presentation is loading. Please wait.

Presentation is loading. Please wait.

MicroSim pspice. 1. 畫電路圖. 2. 更改元件值. 3. 加入測試點. 4. 設定分析項目 5. 執行模擬 SIMULATION. 6. 在示波器視窗中加入軌跡. Pspice 設計流程.

Similar presentations


Presentation on theme: "MicroSim pspice. 1. 畫電路圖. 2. 更改元件值. 3. 加入測試點. 4. 設定分析項目 5. 執行模擬 SIMULATION. 6. 在示波器視窗中加入軌跡. Pspice 設計流程."— Presentation transcript:

1 MicroSim pspice

2 1. 畫電路圖. 2. 更改元件值. 3. 加入測試點. 4. 設定分析項目 5. 執行模擬 SIMULATION. 6. 在示波器視窗中加入軌跡. Pspice 設計流程

3 A part is a basic circuit element, such as a resistor or power source. Each part is associated with a part name and is stored in a library. Part Connection Reference Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 1. 畫電路圖

4 Connections are made primarily by wire segments and bus strips. Part Connection Reference Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 2: 接線 Connections

5 References are unique names for parts. Unlike the generic part names (such as VDC and R) references are different for each instance of the same part. Part Connection 參考名稱 Reference s Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 3: 參考名稱 References

6 Values give the magnitude of each part instance. A name can be associated with each value. Part Connection Reference Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 4: 元件數值 Values

7 Step 5: 模擬 (Run simulation) Part Connection Reference Value V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable

8 模擬結果輸出檔案 Output file Each time Pspice performs an analysis it automatically generates an output file. Netlist field. * Schematics Netlist * V_V1 $N_ V R_R1 0 $N_0001 1K Alias Field. * Schematics Aliases *.ALIASES V_V1 V1(+=$N_0001 -=0 ) R_R1 R1(1=0 2=$N_0001 ).ENDALIASES Small signal bias solution. **** SMALL SIGNAL BIAS SOLUTION TEMPERATURE = DEG C NODE VOLTAGE NODE VOLTAGE ($N_0001) VOLTAGE SOURCE CURRENTS NAME CURRENT V_V E-02 TOTAL POWER DISSIPATION 1.00E-01 WATTS


Download ppt "MicroSim pspice. 1. 畫電路圖. 2. 更改元件值. 3. 加入測試點. 4. 設定分析項目 5. 執行模擬 SIMULATION. 6. 在示波器視窗中加入軌跡. Pspice 設計流程."

Similar presentations


Ads by Google