4 Piezotome 2 LED handpiece Newtron LED handpiece Ultrasonic connector: Objectives:Pre-implant surgery, implantology,maxillofacial surgeries andconventional treatmentsI-Surge micro-motorPiezotome 2 LED handpieceNewtron LED handpieceUltrasonic connector:The Piezotome or Newtron handpieces are automatically recognized by the unit
5 The Implant Center 2 combines the best of ultrasonic and motor technologies for: - Pre-implant surgery,- Implant surgery,- Implant maintenance,- Oral maxillofacial surgeries
6 Technology Motor technology: Ultrasonic technology: Brushless Rotation speed:100 – rpm6 N.cm up to rpmContra-angle ratio: 20:1Rotation speed at instrument end:[5 – rpm]Automatic frequency : kHzControlled amplitudeReal-time power adjustment
7 Ultrasonics Newtron mode: piezo sinusoïdal signal Piezotome mode: modulated piezo signal (modulation)
8 Ultrasonic high power generator Safety: preservation of soft tissue (nerves, membranes,arteries).Rapidity: fine, fast, precise and effortlessselective cut thanks to ultra-sharp, robust andresistant Piezotome tips.Comfort: Atraumatic treatments (no bone loss, no bleeding), fast healing, and greatly reduced post-operative pain.
14 HandpieceRespect of soft tissue, fast healing and greatly reduced post-operative painPiloted by
15 Boosted (up to 60 W output power) for a much quicker procedure, It is up to three times more powerful than Piezotome/Implant Center 1Equipped with the latest high luminosity generation LEDs,Highly resistant,Does not induce overheating or extraneous vibration,Can be sterilized,Easy to clean (the nozzle can be detached).
16 Piezotome mode: Clinical aspects To perform successful, fast and worry-free delicatepre-implant surgical procedures:- fine osteotomy,- osteoplasty,- bone grafting,- sinus lift,- extraction,- crown lengthening- …
17 Piezotome mode LED Purge Irrigation flow rate Progressive footswitch Irrigation activation/ deactivationSave ModeFine power adjustmentPower settings referring to bone density classification
18 Bone densityD1:Very high-density bone and very thick cortical.D2:High-density bone and thick cortical.D3:Medium-density bone, thin cortical and dense spongy bone.D4:Low density bone, thin (or non-existent) cortical and spongy bone.
20 Piezotome 2 Tips Piezotome tips version 2 Piezotome tips version 1 The tips dedicated to Piezotome 2 and Implant Center 2 are easily recognizable by:their large base,their “II” laser mark.Piezotome tips version 1Piezotome tips version 2
21 Piezotome 2 Tips Stainless-steel medical grade alloy with specific thermic andsurface treatments, polishing, etc.Synthetic diamond coating withspecial processing.Clean, fast and effortless cut.Ultra-sharp, robust and resistant tips.NEW PACK design!
24 I-SURGE mode Handpiece motor (contra-angle, straight, multiplier) Progressive or ON/OFF footswitchRotation speedTorqueSave modeRotation direction Audible signalForward/reverse drive selected through the footswitch4 modes with complete customization possible
25 settings adjustments: Modes Fast and simplesettings adjustments: Modes1. Select your program.
26 I-SURGE: four pre-set modes Markingimplant site1200 Rpm80 N.Cm80 ml/minPilot drill800 Rpm80 N.cm100 ml/minSite preparationTapping15 Rpm40 N.cm100 ml/minScrewing30 Rpm40 N.cm0 ml/minP1, P2, P3: Direct access to RpmP4: Direct access to Ncm
27 settings adjustments: CA Fast and simplesettings adjustments: CA1. Select your program.2. Select/change your contra-angle ratio.
28 CA ratio selectionStandard Multiplier Handpiece/ contra-anglePresentation of the most common contra-angle ratios (multiplier, direct, divider).20:1Direct Handpiece/ contra-angleIf the ratio is not pre-defined, insert your own ratio by pressing this button.Standard Divider Handpiece/ contra-angle
29 CA ratio selection 20:1 Set your own contra-angle ratio, whether it is multiplier,direct, ordivider.Handpiece Setting
30 settings adjustments: Rpm Fast and simplesettings adjustments: Rpm1. Select your program.2. Select/change your contra-angle ratio.3. Select the speed rotation needed by:Pressing the + and – buttons on P1, P2 and P3 only,Pressing the Rpm button.
31 settings adjustments: Rpm Fast and simplesettings adjustments: Rpm20:11235Rpm setting
32 settings adjustments: Ncm Fast and simplesettings adjustments: Ncm1. Select your program.2. Select/change your contra-angle ratio.3. Select the speed rotation needed by:Pressing the + and – buttons on P1, P2 and P3 only,Pressing the Rpm button.4. Select the torque needed by:Pressing the + and – buttons on P4 mode only,Pressing the Ncm button.
34 I-SURGE mode 1. Select your program. 2. Select/change your contra-angle ratio.3. Select the speed rotation needed by:Pressing the + and – buttons on P1, P2 and P3 only,Pressing the Rpm button.4. Select the torque needed by:Pressing the + and – buttons on P4 mode only,Pressing the Ncm button.5. Increase/decrease/delete irrigation flow rate.6. Select the progressive or ON/OFF footswitch7. Save
37 LED NEWTRON handpiece • Excellent visibility even in posterior areas, • Cold light (6 000 – 7 000°K) for better tissue recognition,• Ideal for working with loupes,• Powerful ( Lux), very long-lasting LEDs,• Handpiece can be autoclaved at 134°C.
40 NEWTRON mode: Four power settings Low power; low amplitude. Delicate treatments: Periodontics.Medium power; medium amplitude. Precision treatments: Endodontics.High power; high amplitude. Routine prophylaxis: Scaling.Very high power; maximum amplitude. Special treatments: Crown loosening.
41 NEWTRON mode: Fine adjustment Each mode (Soft – Medium - High – Boost) enables fine power adjustment from 1 to 10.
43 Peristaltic pumps Silent-running pumps. Extremely precise irrigation flow.No bone necrosis.Easy to install irrigation line.
44 PiezoTouch™ footswitch Removable archIrrigationChoice of instrumentProgramsPurge,Rotation directionPiezoTouch™Progressive power regulation:Ultrasonics and motor
45 PiezoTouch™D1 to D3, the ultrasonic power delivered will vary between D3 – (01) and the power selected by the user (mode and fine adjustment).In D4 the ultrasonic power will only vary from 1 to 5 depending on the fine adjustment selected by the user.In Newtron function, the ultrasonic power in progressive varies between 1 and 10 in each mode.
46 Optimal disinfection and asepsis Designed for use under the most demanding clinical conditions.All accessories (cords, handpieces, motor,tips…) can be autoclaved at 134°C for 18 minutes.
53 Piloted by Piloted by Technology Ergonomics FEATURES Implant Center 2 Surgisonic MotoINTRAsurg 1000 AirCompanySATELECESACROMKAVOTechnologyHandpiecesPiezotome = Pre-implant surgery I-SURGE = Implant surgery Newtron = All conventional treatmentsSurgysonic2 = Pre-implant surgery Moto = Implant surgerySoniclex Bone --> Pre-implant surgery SONICflex --> Scaling Air-drivenMaximum Output Power (measured)60 Watts - Yield of Power 90%20 Watts - Yield of Power 90%Not measured, averageWeakAutoclavable LED handpieceYES ( Lux)NOPiezoTouch - progressivity in ultrasonicsYESFrequencyHigh: HzHigh: HzLow: HzLinear tip movementYES Controlled and linear Very precise and easy to controlAVERAGENO Variability - Elliptical movement Very hard to controlVery high precisionCruise ControlMotorI-SURGEMOTOINTRAsurg 300 plusBrushless motor UltrasonicsYES YES (Piezo)YES (they claim) YES (Piezo)YES NO (Sonic)The widest speed rotation range on the marketYES rpmNO rpmNO rpmTorque6 N.cm3 N.cm (very low)5.5 N.cmErgonomicsPumps2 peristaltic pumps1 peristaltic pumpTouch screenYES (very fine and easy settings)Multi-function footswitchYES (new weighted footswitch)Handpiece cord length2m or 2.9m on option2mPiloted byPiloted by