Presentation is loading. Please wait.

Presentation is loading. Please wait.

1/19/08Michael Long Eagle Project Plan 3/8” x 36” Metal Threaded Rods Approximately 16in. – Composed of 8 [2” x 4”x 8’] boards bolted together with 3/8”

Similar presentations


Presentation on theme: "1/19/08Michael Long Eagle Project Plan 3/8” x 36” Metal Threaded Rods Approximately 16in. – Composed of 8 [2” x 4”x 8’] boards bolted together with 3/8”"— Presentation transcript:

1 1/19/08Michael Long Eagle Project Plan 3/8” x 36” Metal Threaded Rods Approximately 16in. – Composed of 8 [2” x 4”x 8’] boards bolted together with 3/8” Washers and Nuts 2” x 4” x 28” End Cap Piece (To be cut to actual length after main unit is bolted together) Michael Long– Eagle Project - Exhibit D-1 Plans/Drawings – Top View Spacer = Washer + Nut +Washer 1 ft. 8 ft. 4 ft. 7 ft. All Drill Holes marked from left side due to differences in board lengths. 20

2 1/19/08Michael Long Eagle Project Plan Michael Long– Eagle Project - Exhibit D-2 Plans/Drawings - Front View 2” x 4” Side Braces Approximate Ground Level 2” x4” x 8’ Concrete Mix 1 ft. Center Line 4” = 2-1/2’ x # 8 screw 6” Round Hole Evacuated for Legs. Concrete poured into hole and water added. Note: There will be four legs on each bench 4 ft. 7 ft. 4” 18 in. Brace “A” Brace “B” Brace “C” 19” 9” 21

3 Eagle Project - Exhibit D-3 Plans/Drawings - Side View (With End Piece Removed For Clarity) 2”x4” Side Braces Approximate Ground Level 4”x4”x2’ Bench Legs 16 inches 2” 4” Brace “A” About 16” Brace “B” About 16” Brace “C” Exactly 14” Wide Threaded Rods Spacers = 4” Approximately Washer + Nut + Washer 7“ 14“ Approximately

4 1 ft. 4 ft. 7 ft. Drilling Pattern # 1 – For 48 Seat Rails –-- Material = 48 [2 x 4 x 8’s] Eagle Project - Exhibit D-4 Plans/Drawings – Cutting Patterns ~ 48 in. Cutting Pattern # 2 – For 24 Legs ---- Material = 6 [4 x 4 x 8’s] ~ 48 in. 23 in. Leg 23 in. Leg = saw cut Note: Make all measurements from the left edge.

5 Cutting Pattern # 3 – For 12 End Caps & 12 Leg Brace C --- Material = 6 [2 x 4 x 8’s] Cutting Pattern # 4 – For 24 of each Leg Brace A & B ---- Material = 12 [2 x 4 x 8’s] Eagle Project - Exhibit D-5 Plans/Drawings – Cutting Patterns 18 in. 14 in. End Cap Leg Brace “C” 16 in. Leg Brace “A” Leg Brace “B” 24

6 Measuring team

7 1/19/08Michael Long Eagle Project Plan

8 Cutting and Drilling Team

9

10

11 Bench Assembly Team

12

13


Download ppt "1/19/08Michael Long Eagle Project Plan 3/8” x 36” Metal Threaded Rods Approximately 16in. – Composed of 8 [2” x 4”x 8’] boards bolted together with 3/8”"

Similar presentations


Ads by Google