Presentation is loading. Please wait.

Presentation is loading. Please wait.

WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Choice page Tudalen ddewis Data Unit 1.

Similar presentations


Presentation on theme: "WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Choice page Tudalen ddewis Data Unit 1."— Presentation transcript:

1 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Choice page Tudalen ddewis Data Unit 1 Uned 1 Comments on exam Sylwadau ar yr arholiad Comments on exam Sylwadau ar yr arholiad Comments on exam Sylwadau ar yr arholiad Comments on exam Sylwadau ar yr arholiad Unit 2 Uned 2

2 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 COMMENTS Modular / Linear Very high attempt rate Accessible to all Largest entry for D & T GRADE*ABCDEFGU UMS GRADE RAW MARK / Grade A26.8% Grade C56.9% Grade F95.08% Unit 1 – Examination 40% 2 hrs

3 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 1 Examination 40% 2 hrs Comments on exam. Please click on the table (right)

4 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 COMMENTS Modular / Linear Very high attempt rate GRADE*ABCDEFGU UMS GRADE RAW MARK / Grade A30.6% Grade C72.8% Grade F96.8% Unit 2 – CAT 60% 30 hrs

5 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 The following slides are exemplar CAT pages from the set briefs for Brief 1: MONEY STORAGE Charities often use containers at ‘point of sale’ to collect donations of small change. Design an interactive money container that uses the movement of the coins to create an interesting effect in order to attract customers to make donations. Brief 2: LIGHTING The work of Philippe Starck is often described as being influenced by fashion and novelty. Design and make an innovative lighting product inspired by your study of the work of Philippe Starck. The light must run off a low voltage power source. Brief 3: LEARNING AID FOR YOUNG CHILDREN Young children (age 3 to 7 years) are encouraged to ‘learn through play’. Design and make an educational learning aid for this age group that teaches a specific area of knowledge or a defined skill.

6 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P1 CAT 60% 30 hrs 4 Target market identified Functional and aesthetic factors considered Analysis of prior research Detailed analysis of a product Clear final Brief +More depth required to show detailed understanding of market and similar product. Mark Criteria Next

7 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No analysis presented. 1 There is a very basic analysis of where the product fits in the market place together with a limited evaluation of a similar product. The work presented shows little evidence of prior research and preparation. A simple brief may be evident. 2 There is a basic but appropriate analysis of where the product fits in the market place together with a basic evaluation of a similar product. The work presented shows limited evidence of prior research and preparation. A simple brief is evident. 3 There is a good analysis of where the product fits in the market place together with an evaluation of a similar product. The work presented shows some evidence of prior research and preparation. A clear brief is evident. 4 There is a very good analysis of where the product fits in the market place together with a detailed evaluation of a similar product. The work presented shows good evidence of prior research and preparation. A well-worded brief is evident. 5 There is a comprehensive analysis of where the product fits in the market place together with a very detailed evaluation of a similar product. The work presented shows clear evidence of detailed research and preparation. A clear and appropriate brief is evident. Back

8 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P2 CAT 60% 30 hrs 4 Prioritised list of attributes Appropriate headings Clear links to analysis QWC (quality of written communication) is good Reference to how the specification points will be evaluated. +Specific numeric data could be included Mark Criteria Next 4

9 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 - No specification presented. 1 - A design specification comprising a list of basic attributes for the product. The specification shows little or no links with the analysis of the task. Information is poorly organised, little or no use of technical language/vocabulary. Written communication is limited in terms of organisation of material, with many errors of grammar, punctuation and spelling. 2 - A basic design specification comprising a list of relevant attributes for the product. The specification shows superficial links with the analysis of the task. Information shows evidence of structure, limited use of technical language/vocabulary. Written communication is limited in terms of organisation of material with some errors of grammar, punctuation and spelling. 3 - A good design specification comprising a prioritised list of attributes for the product presented under appropriate headings. The specification illustrates clear links with the analysis of the task. Information is organised, basic use of technical language/vocabulary. Written communication is adequate in terms of organisation of material, with some errors of grammar, punctuation and spelling. 4 - A comprehensive design specification comprising a prioritised list of attributes for the product presented under appropriate headings. The specification demonstrates strong links with the analysis of the task. Information is well organised, good use of technical language/vocabulary. Written communication is good, presenting mainly appropriate material in a coherent manner, with few errors of grammar, punctuation and spelling. 5 - An excellent design specification comprising a prioritised list of attributes for the product presented under appropriate headings. The specification is well founded in the analysis of the task. Information is well organised, presented in a highly appropriate manner, very good use of technical language/vocabulary. Written communication is good, presenting appropriate material in a coherent manner, and largely error-free. Back

10 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P3 CAT 60% 30 hrs A variety of initial ideas are well communicated All ideas reflect the Specification Ideas are well annotated with good use of technical vocabulary +Links to the Specification could be highlighted Mark Criteria Next

11 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No ideas presented. No evidence of written communication A small range of barely appropriate ideas that are poorly annotated. The ideas and annotation show little attention to the specification. Information is poorly organised, little or no use of technical language/vocabulary. Written communication is limited in terms of organisation of material, with many errors of grammar, punctuation and spelling A range of appropriate ideas that are annotated. The ideas and annotation show some attention to the specification. Information shows evidence of structure, limited use of technical language/vocabulary. Written communication in terms of organisation of material with some errors of grammar, punctuation and spelling A range of clear ideas that are appropriately annotated. The ideas and annotation show some attention to the specification. Information is organised, basic use of technical language/vocabulary. Written communication is adequate in terms of organisation of material, with some errors of grammar, punctuation and spelling A range of good initial ideas that are well annotated. The ideas and annotation show good attention to the specification. Information is well organised, good use of technical language/vocabulary. Written communication is good, presenting mainly appropriate material in a coherent manner, with few errors of grammar, punctuation and spelling A range of excellent initial ideas that are very well annotated. The ideas and annotation show close attention to the specification. Information is well organised, presented in a highly appropriate manner, very good use of technical language/vocabulary. Written communication is good, presenting material in a coherent manner and largely error-free. Back

12 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P4 CAT 60% 30 hrs 8 Best idea offered with sound reasoning Mature explanation of decisions made Peer advice is given positive consideration +Initial consideration of product dimensions could be discussed Mark Criteria Next

13 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No ideas presented. No evidence of written communication A small range of barely appropriate ideas that are poorly annotated. The ideas and annotation show little attention to the specification. Information is poorly organised, little or no use of technical language/vocabulary. Written communication is limited in terms of organisation of material, with many errors of grammar, punctuation and spelling A range of appropriate ideas that are annotated. The ideas and annotation show some attention to the specification. Information shows evidence of structure, limited use of technical language/vocabulary. Written communication in terms of organisation of material with some errors of grammar, punctuation and spelling A range of clear ideas that are appropriately annotated. The ideas and annotation show some attention to the specification. Information is organised, basic use of technical language/vocabulary. Written communication is adequate in terms of organisation of material, with some errors of grammar, punctuation and spelling A range of good initial ideas that are well annotated. The ideas and annotation show good attention to the specification. Information is well organised, good use of technical language/vocabulary. Written communication is good, presenting mainly appropriate material in a coherent manner, with few errors of grammar, punctuation and spelling A range of excellent initial ideas that are very well annotated. The ideas and annotation show close attention to the specification. Information is well organised, presented in a highly appropriate manner, very good use of technical language/vocabulary. Written communication is good, presenting material in a coherent manner and largely error-free. Back

14 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P5 CAT 60% 30 hrs 3 Options considered. Form developed through modelling Decision making is evident +Appearance and Style could be further developed Mark Criteria Next

15 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 - No development of form presented. 1 - Limited evidence of the form/style being developed or modelled. An alternative shape or style may be evident. There is no evidence of decision-making. 2 - Some evidence of the form/style being developed or modelled. Several options are presented. There is evidence of decision-making but with little reasoning offered. 3 - Clear evidence of the form/style being developed or modelled. Several options have been offered. There is evidence of reasoned decision-making. 4 - Good evidence of the form/style being developed and modelled. Several appropriate options have been offered. There is clear evidence of informed decision making. 5 - A variety of forms/styles have been presented and the shape and form of the product have been developed and modelled in a progressive way. A final decision based on sound reasoning has been made. Back

16 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P6 CAT 60% 30 hrs 5 All parts of product are considered. Desirable characteristics are stated. Alternatives are offered. Material choices are clearly related to the product to be made – not general statements copied from text book. Clear evidence of decision making. Mark Criteria Next 5

17 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 - No development of materials/components presented. 1 - Limited evidence of the selection of appropriate materials/ components. Materials/components have been stated. There is no evidence of decision-making. 2 - Some evidence of the selection of appropriate materials/components. Alternatives have been offered. There is some evidence of decision-making. 3 - Clear evidence of the selection of appropriate materials/components. Alternatives have been offered. There is evidence of reasoned decision-making. 4 - Clear evidence of the selection of appropriate materials/components. Appropriate alternatives have been offered. There is clear evidence of reasoned decision-making. 5 - Full and clear evidence of the selection of appropriate materials/ components. Appropriate alternatives have been offered. There is evidence of well-reasoned decision- making. Back

18 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P7 CAT 60% 30 hrs 3 Some construction methods offered. Some evidence of decision making. +A greater variety of construction methods could have been considered. Mark Criteria Next 3

19 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 - No development of the construction/making presented. 1 - Limited evidence of the construction/making being developed. A construction/making method has been offered. There is no evidence of decision-making. 2 - Some evidence of the construction being developed. A small variety of construction/making methods have been offered. There is some evidence of decision-making. 3 - Clear evidence of the construction/making being developed. A variety of construction/making methods have been offered. There is evidence of reasoned decision-making. 4 - Clear evidence of the construction/making being developed. A variety of appropriate construction/making methods have been considered. There is evidence of well-reasoned decision- making. 5 - Full and clear evidence of the construction/making being developed. A range of appropriate construction/making methods has been considered. There is evidence of well-reasoned decision- making. Back

20 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P8 CAT 60% 30 hrs 2 Some evidence only. Final sizes offered. Cutting list presented. Good justification of choice made. +Lack of alternatives. +Costing of materials. +Efficient use of materials to avoid waste. Mark Criteria Next 2

21 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 - No development of size/quantity presented. 1 - Limited evidence of sizes and or quantities being developed. Sizes or quantities may be evident. There is no evidence of decision-making. 2 - Some evidence of sizes and or quantities being developed. Alternative sizes and or quantities will be evident. There is some evidence of decision-making. 3 - Clear evidence of sizes and or quantities being developed. Alternative sizes and or quantities will be evident. There is evidence of reasoned decision-making. 4 - Clear evidence of sizes and or quantities being developed. Sizes and or quantities have been developed in a progressive way. There is evidence of reasoned decision-making. 5 - Full and clear evidence of sizes and or quantities being developed. Alternative sizes and or quantities have been systematically evaluated. There is clear evidence of well-reasoned decision-making. Back

22 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P9 CAT 60% 30 hrs 2 Some finish/quality issues considered. Limited QC QA details. +Lack of alternatives. +Information is general – needs to be directly related to product. Mark Criteria Next 2

23 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 - No development of finish/quality presented. 1 - Limited evidence of the development of finish/quality. A suitable finish may be offered. There is no reference to quality control. There is no evidence of decision-making. 2 - Some evidence of the development of finish/quality. An alternative finish is offered. There is brief reference to quality control. There is evidence of decision-making. 3 - Some evidence of the development of finish/quality. Alternative finishes are offered. There is reference to aspects or quality control. There is evidence of decision-making. 4 - Clear evidence of the development of finish/quality. Alternative finishes are offered. There is reference to aspects of quality control. There is evidence of reasoned decision- making. 5 - Full and clear evidence of the development of finish/quality. A range of alternative finishes is offered. There is reference to a variety of quality control issues. There is evidence of well-reasoned decision-making. Back

24 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P10 CAT 60% 30 hrs 3 A recognisable method. Shows reasonable form. +Letters and images are ‘coloured in’ but the image is not rendered or expressively shaded to aid communication of final product. Mark Criteria Next

25 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 - No graphical presentation presented. 1 - A basic illustration of the final product. It is recognisable but lacks proper form. It offers little evidence of shading or colour rendering. 2 - An illustration of the final product. It is recognisable and shows reasonable form. It offers evidence of shading and/or colour rendering. 3 - A clear illustration of the final product. It is recognisable and shows good form. It offers evidence of good shading and/or colour rendering. 4 - A very good graphical presentation of the final product. It uses a recognised graphical technique, is accurate in its structure and It shows effective shading and or colour rendering. 5 - A very high quality graphical presentation of the final product. It uses a recognised graphical technique, is accurate in its structure and shows expressive shading and/or colour rendering. Back

26 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P11 CAT 60% 30 hrs 3 Many details present. Overall dimensions of product are shown. +Details of all parts of the product need to be noted. (putter missing) +Details of finish. Mark Criteria Next

27 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 - No technical details presented. 1 - Limited evidence of technical detail. 2 - Evidence of some technical detail. 3 - Evidence of many technical details. 4 - Evidence of most technical detail. 5 - Evidence of virtually all technical details. Back

28 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P12 CAT 60% 30 hrs 7 Manufacturing steps are outlined. Processes. Estimate of Time (minutes/lessons) Use of technical language. +More manufacturing detail required. +Constraints. Mark Criteria Next

29 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No plan for making presented. No evidence of written communication A list of manufacturing steps is evident but shows little appreciation of the work involved or the time needed. Information is poorly organised, little or no use of technical language/vocabulary. Written communication is limited in terms of organisation of material, with many errors of grammar, punctuation and spelling A list of basic manufacturing steps is evident. The steps contain some detail of the processes required. There is little attempt to quantify the time needed. Information is organised, basic use of technical language/vocabulary. Written communication is limited in terms of organisation of material with some errors of grammar, punctuation and spelling A list of realistic manufacturing steps is evident. The steps contain some detail of the processes required. There is an attempt to quantify the time needed. Information is organised, with basic use of technical language/vocabulary. Written communication is adequate in terms of organisation of material with some errors of grammar, punctuation and spelling A list of realistic manufacturing steps is evident. The steps contain some detail of the processes required and note any constraints. There is a realistic estimate of the time needed to manufacture the outcome. Information is well organised, with good use of technical language/vocabulary. Written communication is good, presenting mainly appropriate material in a coherent manner, with few errors of grammar, punctuation and spelling A clear, appropriate and detailed list of manufacturing steps is evident. Constraints have been recognised. There is a realistic estimate of the time needed to manufacture the outcome. Information is well organised, presented in a highly appropriate manner, with very good use of technical language/vocabulary. Written communication is good, presenting appropriate material in a coherent manner, and largely error-free. Back

30 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P13 CAT 60% 30 hrs 7 A critical evaluation – successes and improvements noted. Refers back to specification. Communication is good. Target market feedback. +All comments should relate to the product – not to the candidate’s personal performance. Mark Criteria Next

31 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No evaluation presented. No evidence of written communication A basic evaluation of the outcome is evident. Comments are general and do not relate back to the initial specification. Information is poorly organised, little or no use of technical language/vocabulary. Written communication is limited in terms of organisation of material, with many errors of grammar, punctuation and spelling An evaluation of the outcome is evident. Comments offer some detail and relate in part back to the initial specification. Information shows evidence of structure, limited use of technical language/vocabulary. Written communication is limited in terms of organisation of material, with some errors of grammar, punctuation and spelling A critical evaluation of the outcome is evident. Comments offer some detail and relate in part back to the initial specification. Information is organised, with basic use of technical language/vocabulary. Written communication is adequate in terms of organisation of material, with some errors of grammar, punctuation and spelling A critical evaluation of the outcome is evident. The comments are perceptive and detailed and relate back to the initial specification. Information is well organised, with good use of technical language/vocabulary. Written communication is good, presenting mainly appropriate material in a coherent manner, with few errors of grammar, punctuation and spelling A critical evaluation of the outcome is evident. The comments are perceptive and detailed and relate in full back to the initial specification. Information is well organised, presented in a highly appropriate manner, very good use of technical language/vocabulary. Written communication is good, presenting appropriate material in a coherent manner, and largely error-free. Back

32 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – P14 CAT 60% 30 hrs 6 Sensible ideas for improvement. Improvements explained through sketching + text. Clearly presented. +Analysis is superficial at places - “nicer finish”, “make it better”. +More mature/technical analysis required for higher marks. Mark Criteria Next

33 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No improvements presented. No evidence of written communication An improvement to the design and/or manufacturing process has been suggested. Written communication is limited in terms of organisation of material, with many errors of grammar, punctuation and spelling Several suggestions for improvements to the design together with a suggestion of how quality of manufacture could be improved. Written communication is limited in terms of organisation of material, with some errors of grammar, punctuation and spelling Several relevant suggestions for improvements to the design together with suggestions of how quality of manufacture could be improved. Quality of written communication is basic, some errors of grammar, punctuation and spelling Well-founded suggestions for improvements to the design together with suggestions of how quality of manufacture could be improved. Information is well organised, with good use of technical language/vocabulary. Written communication is good, presenting mainly appropriate material in a coherent manner, few errors of grammar, punctuation and spelling Well-founded suggestions for improvements to the design together with detailed suggestions of how quality of manufacture could be improved. Information is well organised, with very good use of technical language/vocabulary. Quality of written communication is good, presenting appropriate material in a coherent manner, and largely error-free. Back

34 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – M1 CAT 60% 30 hrs 6 Fairly demanding practical processes. Case is rebated/corners jointed. Combination of CAM and “hand/machine-formed” work included. CAM used creatively. +Processes are not sufficiently demanding to reach higher marking criteria. Mark Criteria Next Range and Difficulty of Practical Processes

35 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No practical processes evident One straightforward practical processes are evident One or two more demanding practical processes are evident A range of fairly demanding practical processes are evident A range of demanding practical processes are evident A range of challenging practical processes are evident. Back

36 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – M2 CAT 60% 30 hrs 19 Good levels throughout. Jointing is good/laser cutting well executed. Parts fit together well. Making skills are effective. Construction is good, not of a consistently high level. Quality of jointing/engraving/printing is slightly inconsistent. Mark Criteria Next Quality of Construction / Making

37 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No practical processes evident Little acceptable accuracy is evident in the construction/making An adequate level of accuracy is evident in only a few aspects of the construction/making An adequate level of accuracy is evident in some aspects of the construction/making A good level of accuracy is evident in all aspects of the construction/ making A high level of accuracy is evident in all aspects of the construction/ making. Back

38 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – M3 CAT 60% 30 hrs 11 Product matches image on page 10 in workbook. Sizes of product matches most technical details on page 11. +Some aspects of product do not match pages 10 and 11. +Visual details missing on page 10. Mark Criteria Next Dimensional Accuracy

39 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No practical processes evident The finished product bears little resemblance to the final design proposal The finished product matches some details, both visual and technical, of the final design proposal The finished product matches many details, both visual and technical, of the final design proposal The finished product matches most details, both visual and technical, of the final design proposal The finished product matches virtually all details, both visual and technical, of the final design proposal. Back

40 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – M4 CAT 60% 30 hrs 11 Good finish achieved on most elements. CAM detailing fairly accomplished. Case is finished to good standard appropriate to child’s toy. +Edging of acrylic/plywood could be better finished. +Extra coat of varnish applied to case. Mark Criteria Next Quality of Finish / Appearance

41 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 No practical processes evident No elements of the product displays an adequate finish Some elements of the product display an adequate finish Most elements of the product display an adequate finish Most elements of the product display a good finish Great care is taken to achieve a very high quality finish on all elements of the product. Back

42 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – M5 CAT 60% 30 hrs 8 Product functions well. Answers the brief on page 1. It meets the Specification criteria on page 2. +Inset shapes can be difficult to remove from frame. +Lid fits into rebate and is not held in place. Shapes can fall out when being carried. Mark Criteria Next Function

43 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 The product does not function on any level The product functions in a very limited or partially finished way The product functions to a limited extent The product functions fairly well The product functions well The product functions perfectly. Back

44 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Unit 2 – M6 CAT 60% 30 hrs 10 Minor support required. Some aspects completed unaided. Followed the plan on page 12 to manufacture the product. +Advice and assistance provided when needed. +Plan on page 12 lacked some details, resulting in candidate getting stuck. Mark Criteria Next Independent Working

45 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Mark Description of Attainment 0 The candidate cannot work without constant support and advice The candidate has required considerable support and advice during the making of the product The candidate has required fairly frequent support and advice during the making of the product The candidate has required some support and advice during the making of the product The candidate has required only minor support and advice during the making of the product The candidate has worked almost entirely unaided whilst making the product. Back

46 WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol Teacher INSET CPD Useful information: – GCSE D&T View all teaching specifications, Specimen assessment materials, Teacher Guidance documents, Principal Examiner reports for each Unit 1 focus area examination, Principal Moderator’s report for Unit 2 CAT, Teachers’ Assessment Materials and Guidance. (Centre specific account details required) View all Item Level Data, Compare your candidates against the whole entry, Identify strengths and areas for development, Past Papers and Marking Schemes, Circulars and PDF downloads, Controlled Assessment Briefs. https://hwb.wales.gov.uk/home/Pages/Home.aspx GCSE D&T – Learning Resources for Focus Areas, Interactive materials,


Download ppt "WJEC DESIGN AND TECHNOLOGY Resistant Materials Technology DYLUNIO A THECHNOLEG CBAC Defnyddiau Gwrthiannol 2013 Choice page Tudalen ddewis Data Unit 1."

Similar presentations


Ads by Google